For a turning operation using a ceramic cutting tool, if the speed is increased by 25%, and constant depth of cut is 2.5mm ,by what factor must the feed rate be modified to obtain a constant tool life? Use n = 0.5 and y = 0.6. VT" d* fy =C where d depth

Q: a production turning operation, the workpart is 60 mm in diameter and 500 mm long. A feed of 0.75…

A:

Q: A turning operation is performed using a rake angle of 15degree. Cutting conditions are, feed= 0.30…

A:

Q: Q4 Tool life of a turning tool is given by VTO.12xx=C_at a cutting speed (V) of 25m/min, feed(f)…

A:

Q: In a slab milling operation , L_w = 200 mm table feed = 18 mm/min, diameter of cutter = 34 mm depth…

A: Given Data: The length of the slab is, Lw=200 mm. The feed rate of the table is, f=18 mm/min. The…

Q: A cast iron component for motorcycle is to be tumed with machine settings of feed = 0.22 mm/rev, and…

A: Surface roughness is calculated.  If you liked my solution, I would really appreciate a LIKE, please…

Q: If a fairing operation is executed at a rotational speed of 40.0 rev / min, the feed is 0.015 in /…

A: As the outer and inner diameter is not given so I am assuming it as D0 and Direspectivelya)…

Q: thickness is HW3.A block of steel has a length L-600mm and a width W-450mm. The Machined 10mm, once…

A:

Q: A part to be turned in an engine lathe must have a surface finish of 1.6 μm. The part is made of a…

A: Proper tool Nose radiusing improves machinability to some extent though. It increase the tool life…

Machining Processes and Machine Tools

Machining is represented as the process in which an excessive amount of substance is eliminated from the particular element in the form of pieces. In machining, cutting tools such as rotary tools, lathe, drill press, grinder, chop saw, welders, and many more are applied to get the desired shape. As compared to other manufacturing processes, machining is precise and versatile.