Answered: For a total PV module of 25m2, what… | bartleby

Related questions

Question

100%

For a total PV module of 25m², what would be the PV power for each if conversion efficiency is 15% on days when an angle of a south-facing collector in [city] be tipped up to have it normal to the Sun's rays at solar noon?

Expert Solution

Given:

The area of the PV module is, $A = 25 m^{2} .$
The conversion efficiency is, $e = 15 % = 0.15 .$

Trending now

This is a popular solution!

Step by step

Solved in 3 steps

SEE SOLUTION Check out a sample Q&A here

Blurred answer

Similar questions

A wood stove is used to heat a single room. The stove is cylindrical in shape, with a diameter of 40.0 cm and a length of 50.0 cm, and operates at a temperature of 400.°F. (a) If the temperature of the room is 70.0°F, determine the amount of radiant energy delivered to the room by the stove each second if the emissivity is 0.920. (b) If the room is a square with walls that are 8.00 ft high and 25.0 ft wide, determine the R-value needed in the walls and ceiling to maintain the inside temperature at 70.0°F if the outside temperature is 32.0°F. Note that we are ignoring any heat conveyed by the stove via convection and any energy lost through the walls (and windows!) via convection or radiation.
The Curiosity rover landed on Mars on August 6, 2012, and is currently exploring the surface. Curiosity uses a radioisotope thermoelectric generator (RTG) to provide power for all operations. The Curiosity RTG has a maximum output of 110 watts [W], and loses 2000 watts [W] as heat. By comparison, Viking 1 spacecraft launched in 1975. The Viking 1 has an input power of 0.75 horsepower [hp] and loses 525 watts [W] to heat. Which device is more efficient?
A fan that consumes 20 W of electric power when operating is claimed to discharge air from a ventilated room at a rate of 1.0 kg/s at a discharge velocity of 8 m/s. Determine if this claim is reasonable.
Consider a room that is initially at the outdoor temperature of 20oC. The room contains a 40-W lightbulb, a 86-W TV set, a 319-W refrigerator, and a 1,339-W iron. Assuming no heat transfer through the walls, determine the rate of increase of the energy content of the room when all ofthese electric devices are on.
I was hoping that you could check to make sure I’m using the correct units. For some reason I am having a hard time understanding when to use 4186 for specific heat of water or 4.186. For the latent heat of fusion, I have it in kg•cal degrees C. In my book it has it in J/kg. Since the book says it is 3.33 X 10^5, how do I get my answer to show in those terms? Thank you!
(a) Cherry-red embers in a fireplace are at 850ºC and have an exposed area of 0.200m2 and an emissivity of 0.980. The surrounding room has a temperature of 18.0ºC. If 50% of the radiant energy enters the room, what is the net rate of radiant heat transfer in kilowatts? (b) Does your answer support the contention that most of the heat transfer into a room by a fireplace comes from infrared radiation?
An incandescent lamp filament has an area of 50 mm² and operates at a temperature of 2,127°C. If all the energy furnished to the bulb is assumed to be radiated from it and the filament's emissivity if 0.83, by how much power must be furnished to the bulb when it is operating?
Imagine choosing between two winter jackets. Assume you have access to a heat-generating mannequin with variable heat output. Insulation is comparable to (TB – TA)/M in the chapter 10 calculation. (This is a generic insulating equation.) How would you quantify the two jackets' insulation?
A person is standing outdoors in the shade where the temperature is 20 °C. (a) What is the radiant energy absorbed per second by his head when it is covered with hair? The surface area of the hair (assumed to be flat) is 160 cm² and its emissivity is 0.81. (b) What would be the radiant energy absorbed per second by the same person if he were bald and the emissivity of his head were 0.68?
To heat a room with dimensions width a=3 m, length b=5 m, height h=2,2 m, approximately an electrical power of P=10 W per square meter is needed. At a cost of 0.2 soles per kW.h, how much will it cost per day to use this heater?
The fins attached to a surface are determined to have an effectiveness of 0.9. Do you think the rate of heat transfer from the surface has increased or decreased as a result of the addition of these fins?
A 75 W light bulb is used for 12 hours a day. The electricity for this bulb comes from a natural gas fired power plant that operates with 49% efficiency. How much CO₂ is emitted per day to power this light bulb? Make a simple estimate of the CO2 emissions from the power plant, ignoring transmission losses. 0.0024 kg CO2/day Xx 0.0024 We mentioned earlier in the course that energy technologies in developing countries often have much lower efficacies than those in developed countries. Let's look at one example, lighting via kerosene lamps, which are common in developing countries but about 150x less effective than incandescent lightbulbs at turning energy into useful light. If a family wanted just one tenth of the light provided by the 75 W lightbulb, they'd need to consume 15x as much power, or 1125 W. If a family ran 1125 W worth of kerosene lamps for just 2 hours each day, how much CO2 would this emit? You may assume that kerosene produces the same emissions as gasoline. 3.00 kg…

SEE MORE QUESTIONS