External Problem 2: Linear Momentum and Bernoulli Equations The double nozzle in the figure below discharges water at A and B into the atmosphere at a rate of 0.5 m'/s. The nozzle is lying in a horizontal plane. Assume steady and frictionless flow and the water speed in each jet (4 and B) to be the same. Jet A is 10 cm in diameter, jet B is 12 cm in diameter, and the pipe inlet is 30 cm in diameter. (p - 1000 kg/m'). a) Applying Bernoulli's equation between the inlet section and any of the outlet sections, show that the pressure at section 1 is 315 612 Pa gage; b) What force acting through the flange bolt is required to hold the nozzle in place? B A - Flange

External Problem 2: Linear Momentum and Bernoulli Equations The double nozzle in the figure below discharges water at A and B into the atmosphere at a rate of 0.5 m'/s. The nozzle is lying in a horizontal plane. Assume steady and frictionless flow and the water speed in each jet (4 and B) to be the same. Jet A is 10 cm in diameter, jet B is 12 cm in diameter, and the pipe inlet is 30 cm in diameter. (p - 1000 kg/m'). a) Applying Bernoulli's equation between the inlet section and any of the outlet sections, show that the pressure at section 1 is 315 612 Pa gage; b) What force acting through the flange bolt is required to hold the nozzle in place? B A - Flange

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A water jet with velocity of 15 m/sec leaving the 10 cm diameter nozzle strike to the plate in normal direction. Upon impact with the plate, the water is equally divided into two parts, i.e. one half leaves at 60° with respect to horizontal and the other half in a straight vertical direction. The density of water is 1000 kg/m3. Find the velocity at outlet neglecting change in elevation between inlet and outlet, gravity and friction between water and plate. Show your control volume
Q4. Water flows steadily through 45° reducing elbow, located on a horizontal plane. V1 = 1.5 m/s, P1 = 4.6 m2. Determine the flow rate. Determine the flow velocity at the narrow section. Determine the dynamic force of the water flow on the elbow. 1.5 m/s 30 сm 20 cm
100 mm 4. Water enters a two-armed lawn sprinkler along the vertical axis at a rate of 60 L/s, and leaves the sprinkler nozzles as 2-cm diameter jets at an angle of u from the tangential direction, as shown in the figure. The length of each sprinkler arm is 0.45 m. Disregarding any frictional effects, determine the rate of rotation n of the sprinkler in rev/min for (a) 0 =0°, (b) 0 =30° r=0.45 m
Water with density 1000 kg/s enters a lawn sprinkler which is rotating at 500 RPM through its base at the steady rate of 1 L/s as shown. The exit area of each of the two nozzles is 30 mm^2 and the flow leaving each nozzle is in the tangential direction. The radius, r, from the axis of rotation to the centerline of each nozzle is 157 mm. The absolute velocity out of each nozzle in m/s is: Select one: a. 25.11 Nozzle exit area = 30 mm² Control volume b. 8.45 c. 83.33 Flow out Flow out Tshaft
Water flows through a horizontal pipe with a cross section area of 4 m2 at a speed of 5 m/s with a pressure of 3000 Pa at point A. at point B the cross section area is 2 m2. Find (a) speed of water at point B? (b) Calculate the pressure at point B. make a graphic presentation of the problem.
As seen in the figure above, the water is directed downward in the installation with a 25 ° narrowing elbow in a piping system with a volumetric flow of 0.025 m3 / s. Effective pressure at 1 point is measured as 2 bar. Calculate (a) the effective pressure at point 2 (b) the x and y components of the force required to hold the elbow in place and the resultant force in the case where the flow is frictionless and gravitational effects are neglected. (pwater=1000 kg/m3, g=9.81m/s2)
An ideal water jet with volume flow rate of 0.05 m^ 3 / s strikes a flat plate placed normal to its path and exerts a force 1000 N Considering the density of water as 1000 kg / (m ^ 3) , find the diameter (in mm) of the water jet.
5
External Problem 2: Linear Momentum and Bernoulli Equations The double nozzle in the figure below discharges water at A and B into the atmosphere at a rate of 0.5 m'/s. The nozzle is lying in a horizontal plane. Assume steady and frictionless flow and the water speed in each jet (A and B) to be the same. Jet A is 10 cm in diameter, jet B is 12 cm in diumeter, and the pipe inlet is 30 cm in diameter. (p = 1000 kg/m'). a) Applying Bernoulli's equation between the inlet section and any of the outlet sections, show that the pressure at section I is 315 612 Pa gage; b) What force acting through the flange bolt is required to hold the nozzle in place? B A 30 Flange