Exercise: Consider a circumferential aluminum fin (k = 220 W/m.°C) having a thickness of 0.1 mm to be installed on 2.5- cm-diameter aluminum tube. The fin length is 1.25 cm and the convection environment is at 20°C, h = 125 W/m2.°C. Calculate the heat transfer for each fin for a tube wall temperature of 200°C.

Exercise: Consider a circumferential aluminum fin (k = 220 W/m.°C) having a thickness of 0.1 mm to be installed on 2.5- cm-diameter aluminum tube. The fin length is 1.25 cm and the convection environment is at 20°C, h = 125 W/m2.°C. Calculate the heat transfer for each fin for a tube wall temperature of 200°C.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

I need help on 2b
Q3/ A 6(m) long 2(kW) electrical resistance wire is made of 0.2(cm) diameter stainless steel (k = 15.1 W/m °C). The resistance wire operates in an environment at 30°C with a heat transfer coefficient of 140 (W/m?. °C) at the outer surface. Find the temperature distribution equation and determine the surface temperature of the wire.
A square pin fin (w=0.6 mm, L=33 mm) is attached to hot surface [87 mm * 69 mm] Ts= 172°C with convection heat transfer coefficient of (1383 W/m K) and surrounding air at 24°C, if the fin efficiency is 0.81 and the center to center distance between any two successive fins =1.5 mm. What is the heat transfer rate (W) from the base surface ONLY when the fins are attached to it?
Thermal jackets are typically put on cryogenicstorage tanks to minimize the heat transfer gainsfrom the surroundings. Consider a cylindercontainer that is 1.5 m long made from steel (k = 750W/m.K) with an inner diameter of 0.5 m and outerdiameter of 0.7 m. If the liquefied natural gas (LNG)inside the cylinder is maintained at 90 K, ambientconditions are Tamb = 20 °C, h = 7 W/m2.K. What isthe required thermal jacket thickness to maintainthe outer temperature of that jacket of 15 °C? (Takea thermal conductivity of the insulation to be kins =0.015 W/m.K). Image credit: Okorder. Image forillustrative purposes only.
A gas at 525 ° C flows through an AISI 316 stainless steel pipe (d.i = 94 mm and d.o. = 100 mm). The pipe is covered with a covering of mineral wool granules with 35 mm thick asbestos binders. The pipe is exposed to ambient air at 25 ° C. The heat transfer coefficients for the surrounding gas and air are 29 W / (m2 K) and 12W / (m2 K), respectively. Do the following: (a) Draw a schematic diagram and the thermal resistances of the scheme b) Calculate the critical radius and indicate if the coating increases or decreases heat transfer c) Calculate the heat loss per meter of tube length with the covering. d) Estimate the temperature on the surface of the coating exposed to the environment
Thermal jackets are typically put on cryogenicstorage tanks to minimize the heat transfer gainsfrom the surroundings. Consider a cylindercontainer that is 1.5 m long made from steel (k = 750W/m.K) with an inner diameter of 0.5 m and outerdiameter of 0.7 m. If the liquefied natural gas (LNG)inside the cylinder is maintained at 90 K, ambientconditions are Tamb = 20 °C, h = 7 W/m2.K. What is the required insulationmaterial to maintain the outer temperature of that jacket of 15 °C? Usethe end of the book and write your assumption with the right value.(Take a maximum allowed jacket thickness of Lins = 7 cm)
The 0.5 m x 1.2 m wall of an industrial furnace is constructed from L = 0.15-m-thick fireclay brick having a thermal conductivity of 1.7 W/m-K. The temperature distribution, at an instant in time, is T(x) = a + bxwhere a = 1400 K and b = -950 K/m. Determine the heat fluxes, q, and heat rates, q,, atx = 0 and.x = L, in W/m2 and W respectively. Do steady-state conditions exist? i W/m? i W/m? Ix=0 = i W i W Ix=L = Steady-state conditions exist. ||
solve a to c
Estimate the natural convection heat transfer coefficient of the horizontal pipe. The outer surface temperature of the pipe is 80 ° C. The ambient air temperature is 40 ° C. The outer diameter of the pipe is 18 cm. Convection coefficient = Answer W / m² ° C.
Consider a vertical cylinder shaped refrigerator (L=90 cm, D=120 cm) where upper flat surface is at T= 5°C, and surrounding air is at 25°C. If the Raleigh Number is of 188x10, What is the convective heat transfer coefficient (W/m .K)? k. = 0.02476 W/m.K %3D air on