ExampleA well mixed sewage lagoon (a shallow pond) is receiving 430 m5jaof wastewater from a sewer pipe. The lagoon has a surface area o10 Ha and a depth of 1.0 m. The pollutant concentration in the rawsewage being discharged into the lagoon is 180 mg/L. The pollutaritin the raw sewage degrades biologically (decay) in the lagocnaccording to first order kinetics. The reaction rate constant is 0.7 /d.Assuming no losses or gains due to evaporation and rainfall and thelagoon is completely mixed, find the steady state concentration ofthe pollutant in the lagoon effluent.

Answered: Image /qna-images/answer/10ac1e58-a637-4cd7-82e9-d966682a0775.jpg

Example A well mixed sewage lagoon (a shallow pond) is receiving 430 m3/a of wastewater from a sewer pipe. The lagoon has a surface area o 10 Ha and a depth of 1.0 m. The pollutant concentration in the raw sewage being discharged into the lagbon is 180 mg/L. The pollutant in the raw sewage degrades biologically (decay) in the lagocn according to first order kinetics. The reaction rate constant is 0.7 /d. Assuming no losses or gains due to evaporation and rainfall and the lagoon is completely mixed, find the steady state concentration of the pollutant in the lagoon effluent.

Example A well mixed sewage lagoon (a shallow pond) is receiving 430 m3/a of wastewater from a sewer pipe. The lagoon has a surface area o 10 Ha and a depth of 1.0 m. The pollutant concentration in the raw sewage being discharged into the lagbon is 180 mg/L. The pollutant in the raw sewage degrades biologically (decay) in the lagocn according to first order kinetics. The reaction rate constant is 0.7 /d. Assuming no losses or gains due to evaporation and rainfall and the lagoon is completely mixed, find the steady state concentration of the pollutant in the lagoon effluent.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Air is passed through the sludge 1. To provide the biomass with the oxygen required for removing the organic matter from the sewage 2. To keep the biomass suspended thus bringing them in close contact with the organic matter in the sewage 3. To kill pathogens 4. To reduce the hydraulic retention time and thus reduce the size of the bioreactor O 2 and 3 only O 1 and 2 only O All of the above O 1,2 and 4
Environmental Engineering: Water Treatment Please consider each of the following points: a. Determine the required residence time for each reactor of 3 equal volume CSTRs in series given a zero-order reaction with a reaction rate constant, k = -5 mg/L hr. The influent concentration is 125 mg/L and 95% conversion is required across the three-reactor system. What is the total reactor system residence time? b. Determine the required residence time for a single CSTR given the same conditions. c. Determine the required residence time for a PFR given the same conditions. d. Why are all three residence time the same?
15.10. Name the six most important oxidants in the aquatic environment, and how the redox p po- tential regulates their reactivity.
A batch reactor will be utilized to treat raw water in order to attain a pollutant removal rate of 95 percent. Assuming that the pollutant has a second-order reaction rate constant of 0.35 L/(mg.day), what is the minimum amount of water that must be present in the batch reactor in days?
The waste water of a certain large colony contains 10-5.6 ions mmol/l of OH at 25 °C. The pH of this sample is
The sludge produced from the aeration tank of the activated sludge process has a solid content of 2% (by weight) is introduced in sludge thickener, where the sludge volume is reduced to half. Assuming that the amount of solid in supernatant from the thickener is negligible, the specific gravity of sludge solids is 2.2 and density of water is 1000 kg/m³ and density of sludge is 1011 kg/m³. What is the solid content (by weight) of the thickened sludge? 3.96% O4% 4.24% 3.36%
An activated-sludge system is to be used for secondary treatment of 15,000 m3/d of municipal wastewater. After primary clarification, the BOD is 130 mg/L, and it is desired to have not more than 5 mg/L of soluble BOD in the effluent. A completely mixed reactor is to be used, and pilot-plant analysis has established the following kinetic values: Y = 0.6 kg/kg, kd = 0.07 d-1. Assuming an MLSS concentration of 2,750 mg/L and an underflow concentration of 11,000 mg/L from the secondary clarifier, determine the followings. [Use θc (MCRT or SRT) = 10 day.] 5.1. The volume of the reactor. 5.2. The mass and volume of solids that must be wasted each day. 5.3. The recycle ratio. Hint: θc = VX/QwXu : MCRT (mean cell-residence time) [or SRT (solids retention time)]; average time microbes spend in reactor = ratio of total biomass in reactor to biomass wasted per given time; currently most commonly used design parameter F/Mv: inversely proportional to SRT; ≈U (cell's specific substrate…
A sample of water at pH 10.5 has 36 mg/L of CO3-2 and 26 mg/L of HCO3-Including the contribution of [H+] and [OH-], find the alkalinity as CaCO3.
(4) [Text-problem 4.29] A 90-m³ basement in a residence is found to be contaminated with radon coming from the ground through the floor drains. The concentration of radon in the room is 1.5 Bq L- (becquerels per liter) under steady-state conditions. The room behaves as a CMFR, and the decay of radon is a first-order reaction with a decay rate con- stant of 2.09 × 10-6 s-1. If the source of radon is closed off and the room is vented with radon-free air at a rate of 0.14 m³ s-1, how long will it take to lower the radon concentration to an acceptable level of 0.15 Bq L-¹?
Environment aerobic.