Example 6.1. Estimate the leaching requirement when electrical conductivity(EC) value of a saturated extract of soil is 10 m mho/cm at 25% reduction in theyield of a crop. The EC of irrigation water is 1.2 m.mholcm. What will be therequired depth of water to be applied to the field if the consumptive use requirementof the crop is 80 mm? EC value of the leaching water may be suitably assumed.

Answered: Image /qna-images/answer/c984b0ea-dc96-4d71-b77b-2f1472a00b26.jpg

Example 6.1. Estimate the leaching requirement when electrical condučtiv (EC) value of a saturated extract of soil is 10 m mho/cm at 25% reduction in the yield ef a crop. The EC of irrigation water is 1.2 m.mho/cm. What will be the required depth of water to be applied to the field if the consumptive use requirement of the crop is 80 mm? EC value of the leaching water may be suitably assumed.

Example 6.1. Estimate the leaching requirement when electrical condučtiv (EC) value of a saturated extract of soil is 10 m mho/cm at 25% reduction in the yield ef a crop. The EC of irrigation water is 1.2 m.mho/cm. What will be the required depth of water to be applied to the field if the consumptive use requirement of the crop is 80 mm? EC value of the leaching water may be suitably assumed.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

7.4 A groundwater sample from well #25 has 123 mg/L of Ca2+ and 21 mg/L of Mg2+. Using this information, express the hardness of the groundwater sample in meq/L and mg/L as CaCO3.
An amount of Sand weighs 500g in stock condition and 480 g in oven dry condition. If absorption capability of the sand is 1.2%, calculate MC(SSD) for the
5. A geotechnical engineering laboratory exercise was conducted to determine the suitability of a clay soil for use in a landfill liner. The exercise consisted of two parts: (a) determining the hydraulic conductivity of the clay soil using a falling head permeameter, and (b) predicting the expected time for leachate to break through a landfill liner made from the same clay soil. a) A sketch (not-to-scale) of the laboratory apparatus used in the falling head permeability test and associated information is shown below. Based on the test results, determine the hydraulic conductivity of the clay soil. Report your answer in cm/s. Diameter of standpipe = 1 mm Diameter of clay soil core = 50 mm Length of clay soil core = Area a h 100 mm Sample аrea A L. The following results were collected in the falling head test: Time (hours) Head (h, in mm) 0.0 0.5 1.0 2.0 4.0 Valve 1000 877 705 546 273 b) If a 36-in thick landfill liner is made with the clay soil tested above, how long would it take for…
Ex 12.2: water with electrical conductivity 1.5 mmhos/cm is used to irrigate crop of 135 cm seasonal consumptive use. Calculate required depth of drained water if the leaching efficiency 50%, maximum allowable soil salinity 6 mmhos/cm
1. The following results were obtained from particle size distribution analysis of three soils - A, B and C. Sieve # 1/2 in 3/8 in #4 # 10 #40 #100 #200 Diameter (mm) 12.5 9.5 4.75 2 0.425 0.15 0.075 0.02 0.003 0.001 WL (or LL, liquid limit) wp (or PL, plastic limit) w (natural water content) Soil A 100 96 89 82 67 57 47 28 8 Percent passing Soil B 3 25 16 11 100 98 82 33 12 5 5 Soil C 100 99 97 85 55 43 51 19 26.5 Required: (1) Plot the particle size distribution curves (semi-log). Determine the following quantities of each soil: the effective particle size dio, the mean particle side d50, the coefficients of uniformity and curvature (if possible). (2) According to the particle size distribution, when the engineering properties are concerned, which soil is the most sensitive to water and which soil is mostly affected by density? Give you logic. (3) Classify the soils according to the USCS.
The groundwater advective velocity is 10 meters per year. The retardation factor is 2.5. What is the retarded velocity?
q-
6
e) According to laboratory_testing results, the hydraulic conductivity (coefficient of permeability of < 1X10' cm/sec of a soil with up to 50 to 60% gravel (i.e. clayey silty gravel, GC-GM). Do you think this soil can be used as a landfill liner? Why and Why not?
A hydraulic pump having volume displacement rate is 10×10-5 m 3 /rev. The flow rate deliver by the pump is 1.5×10-3m 3 /s at 1000 rpm speed and 5 MPa pressure. If the input torque on the prime mover is 100 N.m. Find the overall efficiency of the pump and the theoretical torque require to operate the pump. Consider atmospheric pressure is 1×105 Pa.
4 7 l. 12:33 التدرج الحبيب. . . HW1 HOMEWORK 1 We made sieve analysis for a soil sample, we had these results, complete the table. Sieve opening Wt. retained on Accumulative wt. % of Sieve no % of passing wt. (mm) 4.76 each sieve (gm) (gm) accumulative wt #4 2.38 #20 0,84 88.5 #40 0.42 77.9 #100 0.149 161.6 4200 0.074 29 pan 67.6
Please design a rapid sand filter that will effectively remove 65% of thesuspended solids in a flow of 10 cubic meters per minute. The suspendedmaterial consists of particles that are perfectly spherical with a diameter of 10microns. Please use sand with an effective size of 1 mm and a porosity of 0.5.You should limit your clean bed head loss to 0.5 meters per meter. (Pease use an attachment efficiency, α of 0.75)Viscosity of water =1.0087x10-3 Ns/m2Density of water =998.23 kg/m3What are the dimensions of this filter (Depth and Surface Area)?