Estimate the probable cost per hour for owning and operating a wheel type rubber tires) tractor pulled scraper for the following conditions: Engine-350 HP diesel, Crankcase capacity=95 litres, Time between oil changes-90hrs, Operating factor=0.55, Useful life=15yrs, Hours used per year-3000, Annual cost of maintenance and repair- 95% of annual depreciation, Life of tires=5000 hrs, Repair to tires=10% of depreciation of ires, Total initial cost-Rs. 500000, Cost of tires= Rs. 100,000.Cost of diesel Rs. 100/litre, Cost of lubricating oil=Rs 400/litre.

Estimate the probable cost per hour for owning and operating a wheel type rubber tires) tractor pulled scraper for the following conditions: Engine-350 HP diesel, Crankcase capacity=95 litres, Time between oil changes-90hrs, Operating factor=0.55, Useful life=15yrs, Hours used per year-3000, Annual cost of maintenance and repair- 95% of annual depreciation, Life of tires=5000 hrs, Repair to tires=10% of depreciation of ires, Total initial cost-Rs. 500000, Cost of tires= Rs. 100,000.Cost of diesel Rs. 100/litre, Cost of lubricating oil=Rs 400/litre.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

I need the answer as soon as possible
An automobile company has two version of the same model car for sale, a two-door coupe and the full-size four door. Graphically solve how many cars of each design should be produced to maximize profit and what that profit is? Two Door Four Door Availability $ 13,500/car 15 hr/car $ 15,000/car 20 hr/car Profit Production time 8,000 hr/year Storage 400 сars 350 сars Consumer demand 700/car 500/car 240,000 cars
Solve the questions below by typing in the correct factors or variables into the cells highlighted in orange and the right formulas into the cells highlighted in yellow.
2.1) Show your calculation in determining the total required storage yard for reinforcing steel bar (A) in m' given that:- the total quantity of rebar required for the project (Q) = 1,800 tons, project duration (T) = 120 days, the average stock (t) = 7 days, fluctuation factor of usage (k) = 0.80, quantity of rebar can be stored/m (g.) = 1.40 tons/m, and • utilization index for rebar () = 0.75
Two members of a crew work on floor tiles in the kitchen. The total kitchen floor area is 54 SF. If the crew productivity is 8 SF/hour: 1) Calculate the hours required to complete the work. 2) Daily salary of a crew member is $160, calculate the cost of labors to complete the work (assume 8 hours/day). Hint: Don't forget to round up the next integral hour.
Problem 2: Complete the missing information in the concrete placing labor cost estimating table below. Number 1 2 5 1 Component Foundation Wall to elevation Slab 10 in Beams elevated Beams elevated Member Slab elevation Interior wall Slab elevation Walls Walls Floors elevated Manhole walls Roof Headwall Carpenter foreman Cement mason Laborers Concrete pump Production rate of crew under normal circumstances = 18 m³/hr. The actual production rate can be lower in the different components based on the efficiency factor Total cost 14 12 Quantity (m3) Efficiency factor 44 59 7 14 9 12 57.2 42 8.9 Concrete placing crew 27.3 14 -8 8.5 Rate per hour $45/hr $35/hr $25/hr $55/hr Crew hourly rate ($/hr) 0.89 0.90 Cost/m3 Total 0.75 0.85 0.79 0.78 0.65 0.70 0.85 0.88 0.85 0.80 0.75 0.87 Total labor cost for concrete
Subject: Engineering Economy In manufacturing a kerosene stove, it is necessary to make two half-inch holes in No.22 gage metal. If these are drilled with the help of a jig, each hole will require one minute. The jig will cost P40.00. The drill press operator receives P1.10 per hour. The holes could be made also on a punch press at the rate of 2 holes each 10 seconds. A die would be required at a cost of P80.00. The punch operator will receive P0.90 per hour. If 1,000 stoves are to be produced and the jig or die will have no scrap value, which method will you recommend?
4. A piece of equipment costs $50,000 to buy. Insurance costs $1000 a year. The maintenance costs and salvage values are listed below. Which year should you turn in this equipment? Year 1: Maintenance $5,000, salvage value $40,000 Year 2: Maintenance $6,500, salvage value $35,000 Year 3: Maintenance $8,000, salvage value $30,000 Year 4: Maintenance $9,500, salvage value $25,000 Year 5: Maintenance $11,000, salvage value $20,000
12.13 A civil engineer involved in construction requires 4800, 5810, and 5690 m³ of sand, fine gravel, and coarse gravel, respectively, for
An open-topped tank is to be cylindrical in shape and have volume 50m3. The cost of the material for the circular base is £38 per m2. The cost of the material used for the curved surface is £(38 + 10) per m2. By first finding a function for the total cost of materials in terms of the radius of the tank, use differentiation to find the radius and height of the tank that minimises the total cost of materials. Give your answers in m, to 2 decimal places.
EROR Homewerk ENGR-14O WEEK 6 MARR = 30 %. Using IrUr, Show your work ard make a recomendation. Both options have vsefl laves of 3 yrs. Draw 3 CFDS to receive full credit. Use i- 20% and i- 4070 in your andysis A B. $140 Frst Cust $100 Cost e yr 3 $100 $0 10
If you know that the activity (40-60) represents pouring concrete for the foundations, find the size (quantity) of the work, noting that the activity is accomplished by a team whose productivity (40 cubic meters / day) and the number of working teams is (2). * 17 T=8 20 40 T=8 10 60 T=9 T=4 T=6 30 50 T.F.=4 800 m3 O 200 m3 400 m3 960 m3