Electrically heated draw batch furnaces are commonly used in the heat treatment industry. Consider a draw batch furnace front made of a 20-mm thick steel plate with a ther- mal conductivity of 25 W/m-K. The furnace is situated in a room with surrounding air temperature of 20°C and an aver- age convection heat transfer coefficient of 10 W/m²-K. If the inside surface of the furnace front is subjected to uniform heat flux of 5 kW/m² and the outer surface has an emissiv- ity of 0.30, determine the inside surface temperature of the furnace front.

Electrically heated draw batch furnaces are commonly used in the heat treatment industry. Consider a draw batch furnace front made of a 20-mm thick steel plate with a ther- mal conductivity of 25 W/m-K. The furnace is situated in a room with surrounding air temperature of 20°C and an aver- age convection heat transfer coefficient of 10 W/m²-K. If the inside surface of the furnace front is subjected to uniform heat flux of 5 kW/m² and the outer surface has an emissiv- ity of 0.30, determine the inside surface temperature of the furnace front.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Consider the base plate of a 850W household iron with a thickness of L= 0.5 cm, base area of A = 150 cm?, and thermal conductivity of k= 25 W/m°C. The inner surface of the base plate is subjected to uniform heat flux generated by the resistance heaters inside. When steady operating conditions are reached, the outer surface temperature of the plate is measured to be 85°C. Disregarding any heat loss through the upper part of the iron, a. express the differential equation and the boundary conditions for steady one-dimensional heat conduction through the plate, b. obtain a relation for the variation of temperature in the base plate by solving the differential equation, c. evaluate the inner surface temperature. d. Base plate - 85°C Fig. 1– Base Plate
1. (a) Consider a room with a 1.8-m-high and 2.0-m-wide double-pane window consisting of two 4-mm-thick layers of glass separated by a 10-mm-wide stagnant air space. The convection heat transfer coefficients on the inner and outer surfaces of the window are 12 W/m2 K and 25 W/m2 K, respectively, while the average thermal conductivity of glass is 0.78 W/m K; and the air, 0.026 W/m K. If the room is maintained at 22 oC, the outside temperature is -4 oC and heat transfer due to radiation can be neglected, determine: (i) Draw the sketch and thermal resistance network; (ii) the total thermal resistance; (iii) the steady rate of heat transfer through this double-pane window; (iv) the temperature of the inner surface of the window.…
The wall of a furnace consists of a 0.85 cm-thick layer of steel (ks = 15.1 W/m/K) and an outer layer of brick (kb = .72 W/m/K). The outer surface temperature of the brick, To = 50oC, and is exposed to convection with air at 20oC providing a heat transfer coefficient of 150 W/m^2/K. Determine the steady temperature at the steel brick interface, Tmid, and on the exposed steel surface, Ti, if the brick layer has thickness Lb = 5 cm.
Q) An apple has been put into a freezer at (-18°C) to be cooled. Initially, the apple is at a uniform temperature of 17°C. The convection heat transfer coefficient on its surface is 6 W/m2°C. Assuming the apple as a sphere having a diameter of 10-cm and taking its properties as p = 750 kg/m³, p = 2850 J/kg°c, and k = 0.450 W/m°C, determine; (a) the center temperature of the apple in 45 minutes, (b) the actual amount of heat transfer from the apple, and (c) the final equilibrium temperature of the apple. Hint: consider the temperature is a function of location and time.
The 5-mm-thick bottom of a 200-mm-diameter pan may be made from aluminum (k = 240 W/m.K) or copper (k = 390 W/m-K). When used to boil water, the surface of the bottom exposed to the water is nominally at 110°C and heat is transferred from the stove to the pan at a rate of 1200 W. What is the temperature of the surface in contact with the stove for each of the two materials? Aluminum: T = i °℃ Copper: T = °℃ i
The length of one side of a cube-shaped freezer cabinet is 11.8 m. your closetits base is perfectly insulated against heat transfer and the inner surface temperature is –5 °C, the outer surface temperatureand it is 59°C. To ensure that the thermal load of the cabinet is not less than 0.59 kWThe thickness of the styrofoam foam insulation (k=0.03 W/mK) to be applied to the upper and side surfacesWhat should be less?
A furnace wall is made up of three layer of thickness 150 mm, 110 mm, and 125mm with thermal conductivity of 1.65 W/m-K, k2, and 9.2 W/m-K respectively. Theinside is exposed to gases at 1050°C with a convection coefficient of 25 W/m2-Kand the inside surface temperature is at 900°C, the outside air temperature is at30°C with convection coefficient of 12 W/m2 -K. Calculate:a. the unknown thermal conductivity;b. the outside surface temperature and mid-plane temperatures in °F.
Consider the base plate of a 750-W household iron with a thickness of L=0.6 cm, base area of A=170 cm2, and thermal conductivity of k=22 W/m.oC. The inner surface of the base plate is subjected to uniform heat flux generated by the resistance heaters inside. When steady operating conditions are reached, the outer surface temperature of the plate is measured to be 85 oC. Disregarding any heat loss through the upper part of the iron, (a) express the differential equation and the boundary conditions for steady one-dimensional heat conduction through the plate, (b) obtain a relation for the variation of temperature in the base plate by solving the differential equation, and (c) evaluate the inner surface temperature.
A pipe carrying hot gasses is insulated with a material having a thermal conductivity of 0.15 W/mK. The average local heat transfer coefficient by convection to the ambient air is 3 W/m K. The critical diameter of the pipe under 35. these conditions is (a) 100 mm (c) 160 mm (b) 130 mm (d) 200 mm
Homework problem for unsteady-state heat transfer Consider a product to be sterilized if its coldest location during heating reaches 115°C. Consider sterilization of potatoes where potatoes (4 cm diameter) is heated in steam at 121°C. Assume symmetrical heating of potatoes and the heat transfer coefficient between the steam and the potatoes is 20 W/m² K. The thermal diffusivity for potatoes is 1.5 × 107m²/s and the thermal conductivity is 0.4 W/m K. The potatoes are initially at 30°C. 1) Calculate the heating time needed for sterilization. 2) Calculate the temperature at the center of the potato after heating 1000 s and 2000 s. Plot how the temperature at the center changes with time t. 3) Calculate the temperature at the surface of the potato at 2000 s. Qualitatively plot how the temperature changes across the apple at t = 2000 s.
asap
A furnace wall comprises three layers of thickness 250 mm, 100 mm, and 150 mm with thermal conductivities of 1.65, k and 9. W/m K respectively. The inside is exposed to gases at 1250 ˚C with convection of 25 W/m2K, and the inside surface is at 1100 ˚C, the outside surface air at 25 ˚C with convection of 12 W/m2K. Determine the temperatures of the mid-inner surface in 0C to 1 d.p.?