Design a solar chimney to cover 80% of totalheating losses in February, where U value forthe chimney=D0.4 W/m2.K and the total wallarea of the spaces equal 60m² and thetemperature outside are 30C at night and 8°Cat day and the temperature for the interior is23 Ос.

Given, Overall heat transfer coefficient, U=0.4w/m2KTotal wall area,A=60m2Average inside…

Design a solar chimney to cover 80% of total heating losses in February, where U value for the chimney=D0.4 W/m².K and the total wall area of the spaces equal 60m and the temperature outside are 3°C at night and 8°c at day and the temperature for the interior is 23 °C.

Design a solar chimney to cover 80% of total heating losses in February, where U value for the chimney=D0.4 W/m².K and the total wall area of the spaces equal 60m and the temperature outside are 3°C at night and 8°c at day and the temperature for the interior is 23 °C.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

an unsisulated 100 mm diameter steam pipe runs for 25 meters inside a room whose walls and air are at a temperature of 25 C. the superheated steam inside the pipe maintains the temperature at the pipe surface at 150 C. if the natural convection heat transfer coefficient of the air outside the pipe is 10 w/m^2 k and the surface emissivity is 0.8, compute for the convection thermal resistance of the air film surrounding the pipe in k/W
A wood stove is used to heat a single room. The stove is cylindrical in shape, with a diameter of 26 cm and a length of 52 cm, and operates at a temperature of 490°F. If the temperature of the room is 60°F, and if the emissivity is 0.844, then Calculate, the amount of radiant energy delivered to the room by the stove each second (KW) Answer
9.5 m 9.5 m The two configurations above both have a wall thickness of 550 mm, and a length of 20 m. Which of the two configurations above should a company use if it plans on using a fire clay brick refractory with k = 1.74 W/m. °C? Explain your choice. 9.5 m
Problem 3: During summer, the temperature in Dhahran averages at 38°C for the entire day and night period. To maintain the inside of a building at the comfort level of 20°C, an Engineer suggested to use a commercial air conditioning (AC) system. The insulation and thermal design of the building is such that 28000 kJ/h of heat transfers to Inside 28000 Outside 20°C kJ/h 38°C Refrigerant loop Evaporator Condenser Compressor the building from outside. This amount of heat needs to be removed by the AC. The cost of electricity is 0.21 Ryial/kWh. Hint: 1 kWh-360OJ a. The suggested air conditioner requires a net power input to the compressor of 2 kW. Is the Engineer's suggestion valid? Calculate the coefficient of performance and the cost of electricity for one summer month. b. What is the minimum theoretical cost to operate the air conditioner? Discuss your results.
3 Brass cube "p = 8530 kg/m , c= side length =9 mm, are annealed by heating them first to 813°C in a furnace and then allowing them to cool slowly to 130°C in ambient air at 28°C. If the average heat transfer coefficient is 19.9 W/m .°C, If 2204 balls are to be annealed per hour, what is the total rate of heat transfer (watts) from the balls to the ambient air? 380 J/kg.°C, k = 110 W/m.°C, a = 33.9E-6 W/m.°C",
A solid hemisphere of radius 5 cm to be cooled in air (at 20 o C, h=10 W/m 2 .K) from 200 oC to center of 150 oC, assume following sphere properties ρ=8500kg/m3, k=20W/m.K , C=400 J/kg.Ka. List assumptions and justify selected method of solution b. How long does it take to cool the hemisphere? c. What is the temperature of the surface at end of cooling?
Question 1 An electric current of 6.4 A passing through a resistor has a measured voltage of 9V across the resistor. The resistor is cylindrical with a diameter of 2.5 cm and length of 15 cm. The resistor has a uniform temperature of 115°C and the room air temperature is 23°C. Assuming that heat transfer by radiation is negligible, determine the heat transfer coefficient by convection.
Design a solar chimney to cover 75% of total heating losses, where U value for the chimney=0.5 W/m2.K and the total wall area of the spaces equal 70m2 and the temperature outside are 5oC at night and 8oC at day and the temperature for the interior is 24 oC.
1 - A square chip, with side w = 5 mm, operates under isothermal conditions.The chip is positioned on a substrate so that its side and bottom surfaces are thermally insulated, while its top surface is exposed to theflow of a refrigerant at T∞ = 15°C. From reliability considerations, the chip temperature cannot exceed T = 85°C. The refrigerant being air, with a convection heat transfer coefficientcorresponding h = 200 W/(m2K), what is the maximum allowable power for the chip? Since the coolant is a dielectric liquid for which h = 3000 W/(m²K), what is the maximum allowed power?
Please help with assumptions and fbd
Q2 FigureQ2showsaHeatingRoom,whichpartlyisolated.Thereisathermalsystemconsisting of an electric heater in a room. Heat input by the heater is Q1and heat loss from room is Q2. Air in the room is at uniform temperature, ?, and surrounding temperature is ?o. Thermal capacity of the room is C, and wall thermal resistance is R. (a) Determine a mathematical model of temperature of the room. (b) DeterminetheTransferFunctionoftheheatingroom. (c) Determine the output response of the system when a step input 25°? is given.
The temperature of a gas stream is measured by a thermocouple whose junction can be approximated as a 1-mm-diameter sphere. Take the junction’s properties as: k of 32 W/m K, density of 8.2 kg/m^3, c of 300 J/Kg K. On its surface, the overall heat transfer coefficient is 200 W/m^2 K. Neglect any conduction loss from the sphere to other parts of the thermocouple. Create a plot of measurement error as a function of time for the thermocouple, expressed as a fraction of the initial temperature difference.