3. Dangling a Box Unspecified Liquid. A bal-ance has two identical beakers on either end filledwith the same volume of the same fluid (densityes ). In the left beaker, there is a ball of densityP2 < Pf, which is fixed to the bottom of the beakerby a string. In the right beaker, there is a ball ofdensity p1 > ef which is held from the top by astring attached to an external support. Both ballshave the same volume. When the supports are re-moved from the balance, will the balance move? Ifwhich way?P2supportsupportso,

Let us consider the Normal reaction at beaker A and beaker B: Let us first consider beaker A, here…

Answered: Dangling a Box Unspecified Liquid. A…

Similar questions

In the process of changing a flat tire, a motorist uses a hydraulic jack. She begins by applying a force of 61 N to the input piston, which has a radius r1. As a result , the output plunger , which had a radius r2, applies a force to the car. The ratio r2/r1 has a value of 9.2. Ignore the height difference between the input piston and output plunger and determine the force that the output plunger applies to the car.
A scientist is calculating the density of an ore sample. The scien- tist measures that the ore sample weighs 22.4 N in air. When the sample is suspended by a thin light cord and totally immersed in water, the tension in the cord is 14.2 N. What is the density of the ore sample that the scientist calculates. You can assume that any buoyant force from air is negligible.
What is the difference in blood pressure (mm-Hg) between the bottom of the feet and the top of the head of a 1.61-m-tall person standing vertically? 1 mm-Hg = 133 N/m^2. The density of blood is 1050 kg/m3
A square metal sheet 2.8 cm on a side and of negligible thickness is attached to a balance and inserted into a container of fluid. The contact angle is found to be zero, as shown in Figure a, and the balance to which the metal sheet is attached reads 0.40 N. A thin veneer of oil is then spread over the sheet, and the contact angle becomes 180", as shown in Figure b. The balance now reads 0.39 N. What is the surface tension of the fluid? N/m Need Help? Read
A life preserver is manufactured to support a 70 kg person with 25% of his volume out of the water. If the density of the life preserver is 100 kg/m^3 and it is completely submerged, what must its volume be? Assume that the density of the person to be about the same as the density of water, 1000 kg/m^3. Express your answer with the appropriate units.
A solid block is suspended from a spring scale. If the reading on the scale when the block is completely immersed in water is 25.0 N, and the reading when it is completely immersed in alcohol of density 806 kg/m3 is 25.7 N, what are (a) the block’s volume and (b) its density?
You place an open bottle filled with olive oil (density 880 kg/m^3) in a container filled with water so that the surfaces of both liquids are at the same level. The bottle has a hole in it 18cm below the surface that is initially closed with adhesive tape, as shown in (Figure 1). Determine the vertical distance Δh between the oil surface and water surface after the tape is removed and the equilibrium is reached. Assume that the volume of water is much greater than the volume of olive oil, so that the decrease in the water level is negligible.
A spherical weather balloon is filled with hydrogen until its radius is 4.10 m. Its total mass including the instruments it carries is 16.0 kg. (a) Find the buoyant force acting on the balloon, assuming the density of air is 1.29 kg/m3. kN (b) What is the net force acting on the balloon and its instruments after the balloon is released from the ground? kN (c) Why does the radius of the balloon tend to increase as it rises to higher altitude? Because the external pressure with increasing altitude.
You come across an open container that is filled with two liquids. The two liquids have different densities, so there is a distinct separation between them. Water, which has a density of pw = 1.00 × 103 kg/m³, fills the lower portion of the container to a depth of 0.209 m. The fluid that is floating on top of the water is 0.300 m deep. The acceleration due to gravity is g = 9.81 m/s² and atmospheric pressure is Po = 1.013 × 105 Pa. If the absolute pressure on the bottom of the container is 1.049 × 105 Pa, what is the density p₁ of the unknown liquid? P₁ = kg/m³
Water flowing out of a horizontal pipe emerges through a nozzle. The radius of the pipe is 1.6 cm, and the radius of the nozzle is 0.67 cm. The speed of the water in the pipe is 0.58 m/s. Treat the water as an ideal fluid, and determine the absolute pressure of the water in the pipe. P₁ = Jaka
A spherical weather balloon is filled with hydrogen until its radius is 4.30 m. Its total mass including the instruments it carries is 18.0 kg. (a) Find the buoyant force acting on the balloon, assuming the density of air is 1.29 kg/m³. 4.21 kN (b) What is the net force acting on the balloon and its instruments after the balloon is released from the ground? X kN (c) Why does the radius of the balloon tend to increase as it rises to higher altitude? Because the external pressure decreases v with increasing altitude.
The U-tube in the figure contains two liquids in static equilibrium: Water of density ???? = 998 ????/??3 is in the right arm, and oil of unknown density ???? is in the left. Measurement gives ℓ = 135 mm and ?? = 12.3 mm. What is the density of oil.