Consider the square channel shown in the sketch operating under steady state condition. The inner surface of the channel is at a uniform temperature of 600 K and the outer surface is at a uniform temperature of 300 K. From a symmetrical elemental of the channel, a two- dimensional grid has been constructed as in the right figure below. The points are spaced by equal distance. Tout = 300 K k = 1 W/m-K T = 600 K (a) The heat transfer from inside to outside is only by conduction across the channel wall. Beginning with properly defined control volumes, derive the finite difference equations for locations 123. You can also use (n, m) to represent row and column. For example, location Dis (3, 3), location is (3,1), and location 3 is (3,5). (hint: I have already put a control volume around this locations with dashed boarder.) (b) Please use excel to construct the tables of temperatures and finite difference. Solve for the temperatures of each locations. Print out the tables in the spread sheet. (hint: the red dots here is at constant temperature, 300 or 600 K. The black and blue ones are the ones to be solved. Black ones are edge ones, among which the ones on right is slightly different.)

Consider the square channel shown in the sketch operating under steady state condition. The inner surface of the channel is at a uniform temperature of 600 K and the outer surface is at a uniform temperature of 300 K. From a symmetrical elemental of the channel, a two- dimensional grid has been constructed as in the right figure below. The points are spaced by equal distance. Tout = 300 K k = 1 W/m-K T = 600 K (a) The heat transfer from inside to outside is only by conduction across the channel wall. Beginning with properly defined control volumes, derive the finite difference equations for locations 123. You can also use (n, m) to represent row and column. For example, location Dis (3, 3), location is (3,1), and location 3 is (3,5). (hint: I have already put a control volume around this locations with dashed boarder.) (b) Please use excel to construct the tables of temperatures and finite difference. Solve for the temperatures of each locations. Print out the tables in the spread sheet. (hint: the red dots here is at constant temperature, 300 or 600 K. The black and blue ones are the ones to be solved. Black ones are edge ones, among which the ones on right is slightly different.)

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Related questions

Q: Q3. What is the analogical reason between heat transfer by conduction and flow of electricity…

Q: KNOWN: Rod consisting of two materials with same lengths. Ratio of thermal conductivities. FIND:…

A: Step 1:Step 2: Step 3: Step 4:

Q: under steady-state conditions. If you are given /1 = 200 and 12 = 164 a) the conduction heat flux,…

A: Given, T1= 200°C T2=164°C T∞=20°C Length of the prism (L)= 50mm Thermal conductivity k=100W/mk…

Q: Consider a multi-layered walls of a storage building (no windows) that is made of three layers as…

Q: The temperature distribution across a wall 0.25 m thick at a certain instant of time is T(x) = a +…

Q: 1. A simple cavity wall consists of two brick layers separated by an air gap of 50 mm. If the inside…

Q: A thin bar of length L = 3 meters is situated along the x axis so that one end is at x = 0 and the…

Q: A wood wall 2.5 m ( 8 ft) x 7 m ( 23 ft) x 2.5 cm ( 1 in) thick has thermal conductivity k=0.1 W/Km.…

A: Note: Since you have posted a question with multiple sub-parts, we will solve the first three…

Q: None

A: Step 1:Step 2:Step 3:Step 4:

Q: (a) Consider nodal configuration shown below. (a) Derive the finite-difference equations under…

Q: A food product wants to be produced in a small round shape (pellet) by freezing it in a water blast…

Q: X=0 v Boundary condition on inside surface cle one below -k uation Inside +k dx * (27) ₂0 x-inside…

Q: Given: Plate thickness: 30 mm k = 45 W/m°C Uniform volumetric heat generation: qg = 25 MW/m³…

A: Plate thickness t=30 mm Thermal conductivity k=45 Wm°C Uniform volumetric heat generation q=25 MWm3…

Q: Let's say a 3.0 gram copper wafer is dropped from a height of 50.0 meters. If 60% of the potential…

Q: A steel rod of uniform diameter D= 0.07 m, length L = 1.0 m, and constant thermal conductivity k =…

A: given; diameter of steel rod (D)=0.07m⇒thermal conductivity (k)=70w/m0c⇒ambient air temperature…

Q: A 1-D conduction heat transfer problem with internal energy generation is governed by the following…

Question

Consider the square channel shown in the sketch operating under steady state condition. The inner surface of the
channel is at a uniform temperature of 600 K and the outer surface is at a uniform temperature of 300 K. From a
symmetrical elemental of the channel, a two-dimensional grid has been constructed as in the right figure
below. The points are spaced by equal distance.
Tout = 300 K
k = 1 W/m-K
T = 600 K
(a) The heat transfer from inside to outside is only by conduction across the channel wall. Beginning with
properly defined control volumes, derive the finite difference equations for locations 123. You can
also use (n, m) to represent row and column. For example, location Dis (3, 3), location is (3,1), and
location 3 is (3,5). (hint: I have already put a control volume around this locations with dashed boarder.)
(b) Please use excel to construct the tables of temperatures and finite difference. Solve for the temperatures
of each locations. Print out the tables in the spread sheet.
(hint: the red dots here is at constant temperature, 300 or 600 K. The black and blue ones are the ones to be
solved. Black ones are edge ones, among which the ones on right is slightly different.)

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1: Given data & Objectives

VIEW

Step 2: Finite difference equations

VIEW

Step 3: Equations for all nodes

VIEW

Solution

VIEW

Step by step

Solved in 4 steps with 7 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

! Illustrate
5. Given below is a log-log plot of thermal conductivity (Kt) vs temperature (T) of a non-metallic electric insulator. Explain the respective variations in KT with Tin the three different regimes indicated in the figure. (b) - exp(8,/27) Slope = +3 Slope =-1 II log T log K
Q4/ A room on the second floor of a house with a balcony has a door. The door made of teak (wood) and it contains a large sheet of glass (outside winter type) in the middle and constitutes 80% of the area of the door. Door thickness is 40 mm and the temperature in the room 25. °C when the temperature is in the balcony 8 °C. Calculate the rate of heat loss from the room to the balcony through the door. The door dimensions 2m x 1m. Assume Inside and outside still air thermal resistance f= 8.29 W/m2 °C and f. 34.1 W/m2 °C respectively
: Assume steady-state, one-dimensional heat conduction through the symmetric shape shown in Figure 1. Assuming that there is no internal heat generation, derive an expression for the thermal conductivity k(x) for these conditions: A(x) = (1 - x), T(x) = 300(1 - 2x - x3), and q = 6000 W, where A is in square meters, T in kelvins, and x in meters. Consider x= 0 and 1.
question is image
Consider a solid sphere of radius R with a fixed surface temperature, TR. Heat is generated within the solid at a rate per unit volume given by q = ₁ + ₂r; where ₁ and ₂ are constants. (a) Assuming constant thermal conductivity, use the conduction equation to derive an expression for the steady-state temperature profile, T(r), in the sphere. (b) Calculate the temperature at the center of the sphere for the following parameter values: R=3 m 1₁-20 W/m³ TR-20 °C k-0.5 W/(m K) ₂-10 W/m³
1. Temperatures are measured at the left-hand face and at a point 4 cm from the left-hand face of the planar wall shown in the figure below. These temperatures are T₁ = 45.3 °C and T* = 21.2 °C. The heat flow through the planar wall is steady and one dimensional. What is the value of T2 at the right-hand surface of the wall? TI T* 4 cm 10 cm T2
Question 5:Assume steady-state, one-dimensional heat conduction through the symmetric shape shown in Figure 1.Assuming that there is no internal heat generation, derive an expression for the thermal conductivity k(x) for these conditions: A(x) = (1 -x), T(x) = 300(1 - 2x -x3),and q = 6000 W, where A is in square meters, T in kelvins, and x in meters. Consider x= 0 and 1
The composite wall of an oven consists of three materials, two of which are ofknown thermal conductivity, kA = 25 W/m ⋅ K and kC = 60 W/m ⋅ K, and knownthickness, LA = 0.40 m and LC = 0.20 m. The third material, B, which is sandwichedbetween materials A and C, is of known thickness, LB = 0.20 m, but unknownthermal conductivity kB. Under steady-state operating conditions, measurementsreveal an outer surface temperature of Ts,o = 20°C, an inner surface temperature ofTs,i = 600°C, and an oven air temperature of T∞ = 800°C. The inside convection coefficient h is known to be 25 W/m2 ⋅K. Neglecting convection transfer effect,what is the value of kB?
A spacecraft radioisotope thermoelectric generator (RTG) contains a cylindrical nuclear element, pictured below. The nuclear element generates q̇g = 200 kW/m3. The RTG is surrounded by eight (N = 8) identical rectangular fins. Each fin’s height (H), length (L), and thickness (t) are given in the picture. The fins are directly machined from a stainless steel cladding of inner and outer radii r1 and r2, respectively. The stainless steel has thermal conductivity of k = 18 W/m·K. Assume that the RTG is in a well-ventilated lab, where the convection heat transfer coefficient is h = 20 W/m2·K and the surrounding temperature is T = 20°C. Ignore effects of thermal radiation. (a) Calculate the fin efficiency of a single rectangular fin, f. (b) Calculate the overall fin efficiency of the entire eight fin array, Obtain the maximum temperature in the stainless steel cladding, T(r1).
2. A pipe with: ID: 130mm OD: 165mm k=15 W/m?-K L= 2m is insulated with several materials, and convection on the inside and outside of the pipe is as follows. Oil inside is at 118°C and air outside is at 25°C KA or h 10.256 W/m2-K Material Thickness A 25mm В 2.369 W/m2-K 30mm C 0.257 W/m2-K 40mm h=120.3T2/3 (T in K) h=0.272/3 (T in K) Oil inside Air outside Determine the heat losses of the pipe, and what must be the temperature of the oil to decrease the heat losses by 20%?
Do fast i will give you good rate