Consider a sheet of Iron which is maintainedin an atmosphere filled with nitrogen and ispermitted to achieve and steady statediffuseion. The thickness of the sheet is6.5mm. The diffusion coefficient of nitrogen iniron is 1.9 x 10-1l m2/s at 675°c. If theconcentration on the high-pressure side of theplate is 3kg/m³ and the diffusion flux is 1.7 x10-8 kg/m2 s. Determine the concentration onthe low-pressure side of the plate if the depthof concentration of low-pressure side is 0.001m.A) 3.2 kg/m3B) -3 kg/m3C) 2.1 kg/m3D) 0.001 kg/m3

Given, Thickness of the sheet = 6.5mm Diffusion coefficient of nitrogen = 1.9 x 10-11 m2/s temp = at…

Consider a sheet of Iron which is maintained in an atmosphere filled with nitrogen and is permitted to achieve and steady state diffuseion. The thickness of the sheet is 6.5mm. The diffusion coefficient of nitrogen in iron is 1.9 x 10-11 m²/s at 675°c. If the concentration on the high-pressure side of the plate is 3kg/m3 and the diffusion flux is 1.7 x 10-8 kg/m2s. Determine the concentration on the low-pressure side of the plate if the depth of concentration of low-pressure side is 0.001 m. A) 3.2 kg/m3 B) -3 kg/m3 C) 2.1 kg/m3

Consider a sheet of Iron which is maintained in an atmosphere filled with nitrogen and is permitted to achieve and steady state diffuseion. The thickness of the sheet is 6.5mm. The diffusion coefficient of nitrogen in iron is 1.9 x 10-11 m²/s at 675°c. If the concentration on the high-pressure side of the plate is 3kg/m3 and the diffusion flux is 1.7 x 10-8 kg/m2s. Determine the concentration on the low-pressure side of the plate if the depth of concentration of low-pressure side is 0.001 m. A) 3.2 kg/m3 B) -3 kg/m3 C) 2.1 kg/m3

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Similar questions

A 1.30-mol sample of oxygen gas is confined to a 4.91-L vessel at a pressure of 7.91 atm. Find the average translational kinetic energy of the oxygen molecules under these conditions.
Two molecules are diffusing in a water solution held at the sametemperature T. Molecule A has three times the mass of molecule B. Molecule A also has a mean free path that is half that of molecule B. Both need to diffuse over the same distance (Xeff). How do the diffusion speeds compare? (Express your answer in terms of a “A over B” ratio)
A spherical weather balloon is designed to inflate to a maximum diameter of 17.0 m at its working altitude, where the air pressure is 0.380 atm and the temperature is 194.0 K. If the balloon is filled at atmospheric pressure and temperature 293.0 K, what is its radius at lift-off? Treat the gas as an ideal gas. (Units: m)
The total translational kinetic energy of the molecules of a sample of gas at 415 K is 17500 J. How many moles n does the sample comprise? mol n = Find the average translational kinetic energy Ky of a single molecule. J Kav
(a) 0.3740 moles of krypton gas is placed in a 9.75 L container at 239 K. Find the pressure of the gas in bar? (b) What is the average kinetic energy per mole of krypton gas atoms featured in the previous part? Report your answer in J/mol.
The figure below shows a gas contained in a vertical piston–cylinder assembly. A vertical shaft whose cross-sectional area is 0.8 cm2 is attached to the top of the piston. Determine the magnitude, F, of the force acting on the shaft, in N, required if the gas pressure is 3 bar. The masses of the piston and attached shaft are 24.5 kg and 0.5 kg, respectively. The piston diameter is D = 10 cm. The local atmospheric pressure is 1 bar. The piston moves smoothly in the cylinder and g = 9.81 m/s2.
What is the density of water vapor in the air on a hot, dry day in the desert when the temperature is 40.0 °C and the relative humidity is 5.00 %? The vapor pressure of water at 40.0 °C is Py = 7.34 x 10° Pa and the molecular mass of water is M = 18.0 g/mol. Enter your answer in units of grams per cubic meter. density: g/m3
A cell doesn’t need a circulatory system, but your body does. Let’s do a quick calculation to see why. A typical cell has a diameter of 10 mm. The smallest mammals in the world, shrews, are about 10 μm across. Compute the diffusion time for oxygen molecules through water at 25°C for these two distances.
Thanks
A room is 10.0 m by 7.5 m by 2.7 m is filled with air at 22oC and 1 atm. The average molar mass of air is 28.8 g/mol. Find the number of moles of air to fill the room and the weight of the air in kg.
A 2750 kg pile driver is used to drive a steelI-beam into the ground. The pile driver falls5.26 m before contacting the beam, and itdrives the beam 6.27 cm into the ground before coming to rest.Find the magnitude of the average force thebeam exerts on the pile driver while the piledriver is brought to rest. The acceleration ofgravity is 9.8 m/s2.Answer in units of N.
An industrial firm supplies compressed air cylinders of volume 0.25 m3 filled to a pressure of 20×106 Pa at 17 ºC. Calculate the number of moles of air in each cylinder.