Question Question 1. A cylindrical tank 80 cm in diameter and 90 cm high is filled with a liquid. The tank and the liquid weighed 420 kg. The weight of the empty tank is 40 kg. What is the unit weight of the liquid in KN/m? A cylinder of 125mm radius rotates concentrically inside a fixed cylinder of 130mm radius. Both 2.

Question Question 1. A cylindrical tank 80 cm in diameter and 90 cm high is filled with a liquid. The tank and the liquid weighed 420 kg. The weight of the empty tank is 40 kg. What is the unit weight of the liquid in KN/m? A cylinder of 125mm radius rotates concentrically inside a fixed cylinder of 130mm radius. Both 2.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

2. A cylindrical spring is found to elongate by 3 cm when stretched by a force of 500 Newton. Determine: a) its force constant, b) the work done by a 600-newton force in elongating the spring c) the elongation if a 100- kg mass is hung on the spring.
A liquid storage tank consists of a vertical axis circular cylindrical shell closed at its lowered end by a hemispherical shell as shown in the figure. The weight of the system is carried by a ring like support at the topand the lower extremity is unsupported. A liquid of specific weight of 9KN/m^3 entirely fills the container. Consider H = 8m, R =2.4m, and plate thickness of 1.8mm. a.Find the peak stress in the hemispherical region. b.Calculate the peak circumferential stress in the cylindrical region. **Note = Pressure = specific weight x height Show free body diagram
7. A spherical tank is half full of liquid nitrogen with a density of 50.44 lbm/cu.ft. What is the weight of nitrogen in the tank if its diameter is 15.2 feet. .3 V=3T where r is the radius
Solve in 20-25minutes by applying buoyancy concept
Illustrate the diagram
8. Compute the probable density of a fluid inside a floating spherical balloon having a 2m diameterif the tension in the balloon’s tie rope is observed to be 2kgf. Assume that the density of air is1.18kg/m3. a. 0.7225kg/m3 b. 0.6225kg/m3 c. 0.7025kg/m3 d. 0.5848kg/m3
Mato 1
Q-8 In an aeroplane model of size 1/10 of its prototype the pressure drop is 7.5 kN/m². The model is tested in water. Find the corresponding pressure drop in the prototype. Take Density of air = 1.24 kg/m³.Density of water = 1000 kg/m³. Viscosity of air = 0.00018 poise Viscosity of water = 0.01 poise
Solve the given
A cylindrical tank having a diameter of 3.5m and a height of 10m is full of water. there is an orifice at the bottom of the tank having an area of 0.025 m^2. if the tank has a coefficient of discharge of 0.60, how long will it take to empty the tank in minutes?
Oil is filled within a tall cylindrical tank. A flat disk with a height of 1 cm and with a diameter of 5 cm is placed into the oil. There occurs a narrow spacing of 0.1 mm between the disk and the tank wall. Due to the forces acting on the disk, it moves downward, and after some time, the speed of the disk reaches a terminal velocity. Beyond this moment, measurements reveal that the disk moves 30 cm in 4 seconds. If the oil density is 600 kg/m3and the specific gravity of the disk is 1.5, determine the oil’s viscosity.