445. When the boat reaches the shore, two ropes are thrown to people to help pull the boat ashore. One rope is at an angle of 25° and the other is at 35°. If the boat must be pulled straight and at a force of 500N, find the magnitude of force for each rope (see the following figure). 35° 500 N 25⁰

445. When the boat reaches the shore, two ropes are thrown to people to help pull the boat ashore. One rope is at an angle of 25° and the other is at 35°. If the boat must be pulled straight and at a force of 500N, find the magnitude of force for each rope (see the following figure). 35° 500 N 25⁰

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

asap 5 mins
The three-hinged open-spandrel arch bridge shown in the figure below has a parabolic shape and supports the uniform load . Show that the parabolic arch is subjected only to axial compression at an intermediate point D along its axis. Assume the load is uniformly transmitted to the arch ribs. 7 kN/m В D - 7.5 y= (15) 7.5 m 7.5 m, 75 my 15 m
A two-tier system to repair bridges is supported by two steel cables for each platform. Lengths of the cables are la = 50 in. and lp = 190 in. Assume that two 190 lb workers are going to be standing on the system to repair a bridge, one on each platform. The following design requirement must be met: the stretch of each cable must be less than 0.02 in. at the worst-case loading condition for each cable. 140 in. 250 lb 190 in. 400 lb Determine the minimum diameter required for each cable. (Express your answers using two decimal places.) Cable at A: in. Cable at B: in. Cable at C: in. Cable at D: in.
Final answers should be in the fourth (4th) place value after the decimal point
Determine the magnitude of the vertical force C, for the simply supported beam, where = 8 kips/ft, = 230 kip-ft, 4₁ = 11 ft, 4₂ = 4 ft, and 4₁ = 6 ft. 83.5kips 141.7kips 130.1kips 102.3kips 93.4kips W B L₂ L3 D
If FB = 3 kN and θ = 45°, determine the magnitudeof the resultant force of the two tugboats and its directionmeasured clockwise form the positive x axis.
2 decimal places for the final answer
4 m 100 kN/m 2.5 m 91 kN 2.5 m E F Subject: Civil Engineering / Theory of Structures Question: Draw the shear and bending moment diagrams 55 KN 2.5 m 2.5 m
Fluid Mechanics The buoy is at 1.5m diameter and weighs 3.8kN. I need the detailed solutions and detailed drawings, thanks!
A 25-kg ladder, 4 m long, rests on a rough floor and against a vertical wall. The ladder makes an angle of 35° with the horizontal. It starts to slip when a man weighing 75 kg has climbed halfway up. f= 0.20 at the wall. Ladder Wall 350 8) What is the normal force at the top of the ladder in contact with the wall in kg?
W 60° "The 50 KN block is on top of an inclined plane shown in the figure. Determine the weight (W) of the steel bar that will move the 50 KN block sliding down the inclined plane with velocity of 2 m/sec and displacement of 2 meters. cable 8 H = 0.30 w/
Construct the shear and moment diagrams for the loaded beam shown. After you have the diagrams, answer the questions. 1.0 kN/m Questions: 3.7 m- Atx=1.0m, V- i Atx=2.7m, V= 2.5 kN/m kN, M= KN. M- kN-m kN-m