Chromel is an alloy composed of nickel, iron, and chromium. A 0.6392-g sample was dissolved and diluted to 250.0 mL. When a 50.00-mL aliquot of 0.05173 M EDTA was mixed with an equal volume of the diluted sample, all three ions were chelated, and a 5.15-mL back-titration with 0.06139 M copper(II) was required. The chromium in a second 50.0-mL aliquot was masked through the addition of hexamethylenetetramine; titration of the Fe and Ni required 34.27 mL of 0.05173 M EDTA. Iron and chromium were masked with pyrophosphate in a third 50.0-mL aliquot, and the nickel was Itrated with 24.31 mL of the EDTA solution. Calculate the percentages of nickel, chromium, and iron in the alloy. Percentage of nickel = % Percentage of iron = Percentage of chromium = % %

Chromel is an alloy composed of nickel, iron, and chromium. A 0.6392-g sample was dissolved and diluted to 250.0 mL. When a 50.00-mL aliquot of 0.05173 M EDTA was mixed with an equal volume of the diluted sample, all three ions were chelated, and a 5.15-mL back-titration with 0.06139 M copper(II) was required. The chromium in a second 50.0-mL aliquot was masked through the addition of hexamethylenetetramine; titration of the Fe and Ni required 34.27 mL of 0.05173 M EDTA. Iron and chromium were masked with pyrophosphate in a third 50.0-mL aliquot, and the nickel was Itrated with 24.31 mL of the EDTA solution. Calculate the percentages of nickel, chromium, and iron in the alloy. Percentage of nickel = % Percentage of iron = Percentage of chromium = % %

Chemistry

10th Edition

ISBN:9781305957404

Author:Steven S. Zumdahl, Susan A. Zumdahl, Donald J. DeCoste

Publisher:Steven S. Zumdahl, Susan A. Zumdahl, Donald J. DeCoste

Chapter1: Chemical Foundations

Section: Chapter Questions

Problem 1RQ: Define and explain the differences between the following terms. a. law and theory b. theory and...

See similar textbooks

Related questions

Q: after dissolving in 50.0 ml of good water, the zinc in a 0.3232 gram sample of foot powder was…

A: The percentage of Zn can be calculated asThe weight of zinc = 0.3232 gramsMolar mass of Zn2P2O7 =…

Q: A 0.3674 g powdered milk sample was analyzed for calcium by igniting in a crucible at 1000°C, the…

A: Analysis of sampleMass of sample = 0.3674 gTemperature = 1000oCVolume of EDTA required = 15.62…

Q: Standard CaCO, is used to standardize the EDTA solution prior to titration. Suppose 0.385 g of CaCO,…

Q: How much 0.0500 M EDTA is needed to titrate the Mg and Ca in a 0.2385-g sample that is 92.5%…

A: Given, Molarity of EDTA = 0.0500 M Mass of the sample = 0.2385 g Mass percent of dolomite = 92.5%…

Q: a. A 0.3108-g sample of primary-standard-grade Na2 C2O4 was dissolved in H2SO4 and titrated with…

Q: If 50.0 mL of 1.00 x 10-5 M Fe3+ in a buffer were to be extracted with 5 equal 25.0 mL portions of…

A: The objective of the question is to find the pH of the buffer that would allow for the removal of…

Q: A concentration for the Ni ion was found to be 0.292 M. If you took 0.300 g of nickel sample and…

Q: A cyanide solution with a volume of 12.98 mL was treated with 23.00 mL of Ni2+ solution (containing…

A: Concentration of CN- can be determined if we know the concentration of Ni2+ So first we find the…

Q: A cyanide solution with a volume of 10.33 mL was treated with 22.00 mL of Ni2+ solution (containing…

Q: This EDTA solution is used to analyze a piece of 0.0630 g of metal alloy containing Sn and Cu that…

A: This question is based on estimation of composition of alloy by using EDTA titrations. In the given…

Q: 0.0322 M EDTA solution is used as the titrant in the titration of a 50.00 mL solution that is 0.0129…

A: EDTA titration is a type of complexometric titration that uses ethylenediaminetetraacetic acid…

Q: Calculate the volume of 0.0500 M EDTA needed to titrate the Ca in 0.1973 g of CaCO3

Question

Chromel is an alloy composed of nickel, iron, and chromium. A 0.6392-g sample was dissolved and diluted to 250.0 mL. When a 50.00-mL aliquot of
0.05173 M EDTA was mixed with an equal volume of the diluted sample, all three ions were chelated, and a 5.15-mL back-titration with 0.06139 M
copper(II) was required. The chromium in a second 50.0-mL aliquot was masked through the addition of hexamethylenetetramine; titration of the Fe
and Ni required 34.27 mL of 0.05173 M EDTA. Iron and chromium were masked with pyrophosphate in a third 50.0-mL aliquot, and the nickel was
titrated with 24.31 mL of the EDTA solution. Calculate the percentages of nickel, chromium, and iron in the alloy.
Percentage of nickel =
%
Percentage of iron =
Percentage of chromium =
%
10

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, chemistry and related others by exploring similar questions and additional content below.

Similar questions

A solid containing tris was dissolved in water and brought to a total volume of 50.00 ml. A 10.00 ml aliquot of the solution was titrated with 0.09978 M HCl to a bromcresol green endpoint. The aliquot consumed 38.93 ml of titrant. Calculate the weight of tris in the original sample.
4. The cadmium and lead ions in a 50.00 mL sample required 40.09 mL of a 0.005000 M EDTA for titration. A 75.00 mL portion of the same sample was made basic and treated with excess KCN masking the cadmium as Cd(CN),?. This solution required 21.42 mL of the EDTA for titration. Calculate the concentration of Cd2* and Pb2* in the sample ppm and in M.
You want to separate Cd2* and Fe2+ (initial concentration 103 mol/L) by means ofprecipitation of the corresponding sulphides. Is therea pH range in which one of the two metals is precipitated quantitatively(concentration in the solution less than or equal to 10" mol/L) is precipitatedwhile the other is still completely_in solution?Calculate and name this pH range where pH values below 0are set equal to O. Illustrate the situation graphically by drawing
A1.3174-g sample containing the chloride salts of magnesium, mercury(II), and zinc was dissolved in 250.0 ml of solution. A 50.00-mL aliquot was treated with 1o ml of an NH,/NH,CI buffer at pH 10 followed by 25.00 ml of o.o5331 M EDTA. After a few minutes of mixing, the excess EDTA was back titrated with 11.43 mL of o.o1816 M MagCl.. A second 50.00-mL aliquot was made basic and treated with excess NaCN, complexing both the mercury and zinc. The magnesium in this sample required 16.83 mL of o.005583 M EDTA for titration. The solution remaining at the end point of this titration was treated with excess formaldehyde, which reacts with the free CN and Zn(CN),: OH CN + HCHO + H.O H.C + OH CN The liberated Zn" required 28.47 mL of the EDTA for titration. Calculate the percentage of each metal in the sample. Answer: 0.8669 % Mg: 3.94 % Zn; 19.4 % Hg
A 100.0-mL sample of spring water was treated to convert any iron present to Fe2+.Titration with 35.00-mLof 0.002345 M K2Cr2O7 resulted in the reaction6Fe2+ + Cr2O72- + 14H+  6Fe3+ 1 2Cr3+ + 7H2OThe excess K2Cr2O7 was back-titrated with 8.32 mL of 0.00897 M Fe2+ solution.Calculate the concentration of iron in the sample in parts per million.
Hh.88.
A 0.1700.170 mole quantity of NiCl2NiCl2 is added to a liter of 1.20 M NH31.20 M NH3 solution. What is the concentration of Ni2+Ni2+ ions at equilibrium? Assume the formation constant of Ni(NH3)2+6Ni(NH3)62+ is 5.5×1085.5×108.