Answered: Calculate the tensile modulus of… | bartleby

Related questions

Question

Problem 5
Calculate the tensile modulus of elasticity for a laminated composite consisting of 62 percent by volume
of unidirectional carbon fibers and an epoxy matrix under isostress conditions. The tensile modulus of
elasticity of the carbon fibers is 340 GPa and that of the epoxy is 4.50 x 10° MPa.

Expert Solution

Trending now

This is a popular solution!

Step by step

Solved in 3 steps with 3 images

SEE SOLUTION Check out a sample Q&A here

Blurred answer

Similar questions

A horizontal aluminium rod 4.8 cm in diameter projects 5.3 cm from a wall. A 1200 kg object is suspended from the end of the rod. The shear modulus of aluminum is 3.0 x 1010 N/m2. Neglecting the rod's mass, find (a) the shear stress on the rod and (b) the vertical deflection of the end of the rod.
A 1.25 m long cable has a diameter 3.50 mm with a Young's Modulus, E, of 9.75 x 109 N/m2. When the wire is placed under tension, it experiences a stress of 202.52 x 106 N/m2, the length of the cable extends by 36.35 mm. Calculate the force that the cable experiences under tension and the strain energy density (UV) due to deformation. Give your answers in newtons (N) to 2 decimal places for the force; and in joules per cubic metre (J/m³) for the strain energy density to 2 decimal places. Assume the cable is solid and the material is homogeneous
Between each pair of vertebrae in the spinal column is a cylindrical disc of cartilage. Suppose that such a particular disc of cartilage has a a radius of 3.118 cm (100cm = 1 meter) and a thickness of 6.877 mm (1000mm= 1meter). The shear modulus of cartilage is 1.2 × 107 N/m2. Suppose that a shearing force of magnitude 9 N is applied parallel to the top surface of the disc while the bottom surface remains fixed in place. How far does the top surface move relative to the bottom surface in microns (1 meter = 106 microns)?
A 1.6 x 10-3-kg house spider is hanging vertically by a thread that has a Young's modulus of 4.3 x 109 N/m2 and a radius of 12 x 10-6 m. Suppose that a 96-kg person is hanging vertically on an aluminum (Young's modulus 6.9 x 1010 N/m2) wire. What is the radius of the wire that would exhibit the same strain as the spider's thread, when the thread is stressed by the full weight of the spider?
Two wooden members, each having a width of b = 2.4 in. and a depth of d = 0.8 in., are joined by a simple glued scarf joint. Assume B = 47°. If the allowable shear stress for the glue used in the joint is 94 psi, what is the largest axial load P that may be applied? Answer: P = i ! Ib
A 1.25 m long cable has a diameter 3.50 mm with a Young’s Modulus, E, of 9.75 x 109 N/m2 . When the wire is placed under tension, it experiences a stress of 202.52 x 106 N/m2 , the length of the cable extends by 36.35 mm. Calculate the force that the cable experiences under tension and the strain energy density (U/V) due to deformation. Give your answers in newtons (N) to 2 decimal places for the force; and in joules per cubic metre (J/m3 ) for the strain energy density to 2 decimal places. Assume the cable is solid and the material is homogeneous.
A structural steel bar with a 3.6 in. x 0.890 in. rectangular cross section is subjected to a tensile axial load of 54 kips. Determine the maximum normal and shear stresses in the bar. Answer: Omax i ! ksi %3D Tmax = i ksi
A steel rod has length 60.3 cm and radius 2.20 cm. An aluminum rod has length 20.0 cm and radius 2.20 cm. The rods are joined end to-end. When compressive forces of magnitude 5.40 are applied to the ends, by how much does the total length of the rods decrease? Young's modulus of steel is 200 * 10 ^ 11 * N / (m ^ 2) and Young's modulus of aluminum is 700 * 10 ^ 10 * N / (m ^ 2) m