C1 (a). A lubricating oil having the dynamic viscosity of 0.056 poise and specific gravity of 1.17. Calculate (i) the density of oil in kg/m3, (ii) the weight density of oil in N/m3, (iii) the kinematic viscosity in stokes, and (iv) the specific volume in m2/kg. C1 (b). The capillary effect in a glass tube of 2.8 mm diameter, when immersed in (1) water and (2) mercury are 7.7 mm and -3.5 mm respectively. Calculate the value of surface tension in contact with air for water and mercury in N/m. Take, the contact angle for water =0° and mercury =130°.

C1 (a). A lubricating oil having the dynamic viscosity of 0.056 poise and specific gravity of 1.17. Calculate (i) the density of oil in kg/m3, (ii) the weight density of oil in N/m3, (iii) the kinematic viscosity in stokes, and (iv) the specific volume in m2/kg. C1 (b). The capillary effect in a glass tube of 2.8 mm diameter, when immersed in (1) water and (2) mercury are 7.7 mm and -3.5 mm respectively. Calculate the value of surface tension in contact with air for water and mercury in N/m. Take, the contact angle for water =0° and mercury =130°.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The corners of the square plate are given the displacements indicated. Determine the average normal strains alongside AB and diagonals AC and BD.
What methods exist to calculate the viscosity of dense gases and liquids?
the black sqaure is delta (change) in pressure Assume that p is a function of average velocity V, pipe length L and diameter D, the pipe roughness e (mean height of roughness of the pipe wall, e.g. in microns), and the fluid density . 1.How many nondimensional parameters are needed to define the nondimensional pressure-drop vs. flow relationship in the pipe? 2. Using (D, , and V) as repeating parameters, derive the nondimensional pressure drop and other required parameters to relate p, V, L, D, e , and .
Please answer the problems. Show the complete solution.
w
I know my answer is wrong, compared to what your answer is, but I'm not sure what I'm doing wrong. The problem is 1.52 from Applied Fluid Mechanics 7th edition. The explaination is very vague and shows a formula not given by the book.
25
is called a cone-plate viscometer A solid cone of angle 2k, base 1, and density p, is rotat- Ing with initial angular velocity my inside a conical.seat, as shown in Fig. of viscosity u. Neglecting air drag, derive an analytical ex- pression for the cone's angular velocity ) if there is no applied tongue. The device in Fig. The angle of the cone is very small, so thiat sin 0 0, and the gap is filled with the test liquid. The torque M to rotate the cone at a rate 1 is measured. Assuming a lin- ear velocity profile in the fluid film, derive an expression for tiuid viscosity u as a tumction of (M, R. S2, 0). The clearance h is filled with nil Bave C co radius a dwit) dt Fluid I manmot 1Inentia Derive an expression for the capillary height change h for a fluid of surface tension Y and contact angle 0 between two vertical parallel plates a distance W apart, as in Fig. . What will li be for water at 20°C if W = 0.5 mm? A thin plate is separated from two fixed plates by very vis- cous liquids…
A vertical cylindrical continuous decanter is to separate 44 gal/min of a liquid petroleum oil from wash acid. The volume of wash acid is twice the volume of the liquid petroleum oil. The oil is the continuous phase and at the operating temperature has a viscosity of 1.1 mPa.s and a density of 54.6 lb/ft3. The density of the acid is 72 lb/ft3, Compute (a) the volume of the decanter, (b) the liquid levels of the light and heavy liquids in the vessel and (c) the height of the heavy liquid overflow leg where the heavier liquid is discharged in an open atmosphere with a pressure of 750 mmHg. Assume that the ends of the vessel are flat and that the vessel height is twice its diameter. Air space with a pressure of 780 mmHg on top of the lighter liquid is 1/4 the volume of the mixture.
Hello Expert, Please assist with this Fluid Mechanics Question. Kindly answer correctly and show ALL the steps. Thanks in advance
Fluid
List the various types of fluid. Define kinematic viscosity and compressibility. Note the expression of capillary fall as well.