At the inlet to a certain nozzle the enthalpy of fluid passing is 2800 kJ/kg. In addition, the velocity is 50 ms. At the discharge end, the enthalpy is 2600 kJ/kg. The nozzle is horizontal and there is negligible heat loss from it. a. Find the velocity at the exit of the nozzle? b. If the inlet area is 900 cm and specific volume at the inlet is 0.187 m/kg, find the mass flowrate? c. If the specific volume at the exit of the nozzle is 0.498 m'kg, find the exit area of nozzle? Fhid in -Fhaid out V- 50 m's A- 900 em hi- 2800 kkg h:- 2600 kkg

At the inlet to a certain nozzle the enthalpy of fluid passing is 2800 kJ/kg. In addition, the velocity is 50 ms. At the discharge end, the enthalpy is 2600 kJ/kg. The nozzle is horizontal and there is negligible heat loss from it. a. Find the velocity at the exit of the nozzle? b. If the inlet area is 900 cm and specific volume at the inlet is 0.187 m/kg, find the mass flowrate? c. If the specific volume at the exit of the nozzle is 0.498 m'kg, find the exit area of nozzle? Fhid in -Fhaid out V- 50 m's A- 900 em hi- 2800 kkg h:- 2600 kkg

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Billy flew from New York to Cincinnati and had a closed container with a closed outlet to drink from. The container has a diameter of (D. = 5 cm) and height of (H. = 27 cm). The container is filled with 72% of water. The container's outlet has a diameter of (D. = 1 cm) and height of (H, = 30 cm). Last moment container was opened was in New York at an atmospheric pressure of 1072 hPA. When Billy landed in Cincinnati the atmospheric pressure was 850. When Billy opened the bottle once again water discharged because of difference in pressure. 1. Calculate instantaneous flow rate at the point when the closed containers outlet was opened. Assume pressure in the closed container is the difference between cities = 222 hPa and air pressure in Cincinnati 0. Figure 1: Do = Icm Ho = 30 cm %3D 27 = H. Cm Hw Dc =5 Cm
Q3. A pressurized tank of water has a 10-cm-diameter orifice at the bottom, where water discharges to the atmosphere. The water level is 2.5 m above the outlet. The tank air pressure above the water level is 250 kPa. Neglecting frictional effects, determine the initial discharge rate of water from the tank. CLO3, SOI (ABET). Air 250 kPa 2.5 m 10 cm
Please verify my answer
Explain the steps in simple way so that i can understand the problem. Kindly don't use Ai ,It is Important one.
Please assist me with this question as soon as possible.
three immiscible fluid are contained in a tank 1.0 m of water, 1.20 m of oil (s=0.80 and air under a pressure of 16 kPa. The tank is closed and has a height of 3.0 m and diameter of 1.0m. Find the theoretical velocity through a 5 cm diameter orifice located 30 cm above the bottom of the tank.
Q.3. Air flows in constant area duct with M1 = 1.5, p, = 69 kPa at one section, and M2 = 3.0 at downstream section, find p2 and the direction of heat transfer.
Q4) The nozzles receive steam at 1.75 MPa, 300 °C, and exit pressure of steam is 1.05 MPa. If there are 16 nozzles, find the cross-sectional area of the exit of each nozzle for a total discharge to be 280 kg/min. Assume nozzle efficiency of 90%. If the steam has velocity of 120 m/s at the entry to the nozzles, by how much would the discharge be increased?
A compressor draws in 0.25 m% of air whose density is 1.26 kg/m? and discharges it with a density of 4.87 kg/m°. At the suction, P, = 103.4 kPaa; at the discharge, P2 = 551.4 kPaa. The increase in the specific internal energy is 78.63 kJ/kg, and the heat from the air by cooling is 30.24 kJ/kg. Neglecting changes of potential and kinetic energy, determine the work on air in kW, BTU/min, and Hp.
Fluid falls from a 50 m elevation.a. Determine the velocity of the fluid at the surface of the reservoir.b. What is the temperature of the water in the reservoir?Let heat capacity of the fluid equal to 4.19 kj/kg* °C. Assume a steady-state and adiabatic process.
Q.3 In a steady flow of water, water is coming in through Pipe 1 (area 1 m, velocity 1 m/ s) and Pipe 2 (area 2 m, velocity 2 m/s) and 2. going out through Pipe 3 (area 2.5 m-). The exit velocity of Pipe 3 is? A 3 m/s В 6 m/s 5 m/s D 2 m/s