An opaque, diffuse, gray, square (200 mm x 200 mm) plate with an emissivity of 0.8 is placed over the opening of a furnace (L = 200 mm) and the plate temperature is known to be 400 K at a certain instant. The bottom of the furnace, having the same dimensions as the plate, is black and operates at 900 K. The sidewalls of the furnace are well insulated. The top of the plate is exposed to ambient air with a convection coefficient of 25 W/m²-K and to large surroundings. The air and surroundings are each at 300 K. Tsur T Air h Plate -Insulated sidewalls -Furnace bottom (a) Evaluate the net radiative heat transfer to the bottom surface of the plate, in W. 91 i W (b) If the plate has mass and specific heat of 2 kg and 900 J/kg-K, respectively, what will be the change in temperature of the plate with time, dT,/dt, in K/s? Assume convection to the bottom surface of the plate to be negligible. dT, = i dt K/s

An opaque, diffuse, gray, square (200 mm x 200 mm) plate with an emissivity of 0.8 is placed over the opening of a furnace (L = 200 mm) and the plate temperature is known to be 400 K at a certain instant. The bottom of the furnace, having the same dimensions as the plate, is black and operates at 900 K. The sidewalls of the furnace are well insulated. The top of the plate is exposed to ambient air with a convection coefficient of 25 W/m²-K and to large surroundings. The air and surroundings are each at 300 K. Tsur T Air h Plate -Insulated sidewalls -Furnace bottom (a) Evaluate the net radiative heat transfer to the bottom surface of the plate, in W. 91 i W (b) If the plate has mass and specific heat of 2 kg and 900 J/kg-K, respectively, what will be the change in temperature of the plate with time, dT,/dt, in K/s? Assume convection to the bottom surface of the plate to be negligible. dT, = i dt K/s

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Liquid oxygen is stored in a thin-walled, spherical container 0.8 m in diameter, which is enclosed within a second thin-walled, spherical container 1.6 m in diameter. The opaque, diffuse, gray container surfaces have an emissivity of 0.05 and are separated by an evacuated space. If the outer surface is at 280 K and the inner surface is at 95 K, what is the mass rate of oxygen lost due to evaporation, in kg/s? (The latent heat of vaporization of oxygen is 2.13 x 105 J/kg.) m = i kg/s
determine the view factor, and the net heat transfer by radiation between two gray surfaces, A (εA= 0.88) and B (εB= 0.65) at temperatures 450°C and 50°C, respectively if d. surfaces A and B concentric cylindrical tubes with diameters of 400 mm and 200 mm, respectively e. both surfaces are discs of diameter 3 m one exactly above the other, 1 m apart
A 30 x 30 cm door in a brick kiln is at a distance of 3.5 m from a wall 12 m wide and 5 m high. The door is so located that a normal from the center of the door strikes the wall midway from the ends and 1.5 m above the floor. The opening into the kiln may be considered a black body; the wall is painted flat paint (Ɛ = 0.46). The temperature inside the kiln is 1 400 C and the wall temperature is 60 C. Determine (a) the configuration factor F12 and (b) the net radiant heat exchange between the opening and the wall when the fire door is open?
A plate that is exposed to the outside environment at 30 ° C, gets airradiation of 2000 W / m2. The plate, which absorbs 80% of the irradiationand it has an emissivity of 0.5, it is always at a uniform temperature.An external air flow at 20 ° C and 15 W / m2-K go through the plate. Calculatethe temperature of the plate if it is in thermal equilibrium and insteady state conditions.
A furnace is located next to a dense array of cryogenic fluid piping. The ice-covered piping approximates a plane surface with an average temperature of Tp = 0°C and a total, hemispherical emissivity of εp = 0.53. That is, the piping can be replaced by a flat surface with the given properties. The furnace wall has a temperature of Tf = 206°C and a total, hemispherical emissivity of εf = 0.83. To minimize the heat loading on the regirgeration equipment and piping, a reflective aluminum radiation shield with a total, hemispherical emissivity of εs = 0.14 on each of its sides is installed between the pipiing and the furnace wall as shown. Assume that all surfaces are diffuse and gray and treat the problem as one-dimensional (surfaces form infinite parallel plates). What is the heat load on on the refrigeration unit? That is, what is the net radiative power at the surface which approximates the dense array of ice-cold piping, qrad,p in Watts?
A composite wall is comprised of two large plates separated by sheets of refractory insulation. In the installation process, the sheets of thickness L = 50 mm and thermal conductivity k = 0.05 W/mK are separated at 1-m intervals by gaps of width w = 10 mm. The hot and cold plates have temperatures and emissivities of T1 = 400 deg C, emissivity1 = 0.85 and T2 = 35 deg C, emissivity2 = 0.5, respectively. Assume that the plates and insulation are diffuse-gray surfaces. %3D Determine the heat loss by radiation through the gap per unit length of the composite wall (normal to the page). Recognizing that the gaps are located on a 1-m spacing, determine what fraction of the total heat loss through the composite wall is due to transfer by radiation through the insulation gap. Hot side Gap w = 10 mm A. 47 W/m, 9.2% T1 = 400°C B. 47 W/m, 10.2% L = 50 mm C. 37 W/m, 10.2% D. 37 W/m, 9.2% T2 = 35°C Cold side 1 m Insulation, k = 0.05 W/m-K
This experiment is conducted to determine the emissivity of a certain material. A long cylindrical rod of diameter D₁ = 0.01 m is coated with this new material and is placed in an evacuated long cylindrical enclosure of diameter D₂ = 0.1 m and emissivity 2 = 0.95, which is cooled externally and maintained at a temperature of 200 K at all times. The rod is heated by passing the electric current through it. When steady operating conditions are reached, it is observed that the rod is dissipating electric power at a rate of 16 W per unit of its length, and its surface temperature is 600 K. Based on these measurements, determine the emissivity of the coating on the rod. The emissivity of the coating on the rod is 0.1165
A spherical instrumentation device with a diameter of 102.16 mm has an emissivity of 0.32. It is contained in a large space simulation chamber whose temperature is preserved at 64.1 K. If its daily operation is restricted to the temperature range 50.6
Question 30 of 30 く - / 4.3 View Policies Current Attempt in Progress Two concentric spheres of diameter D = 0.8 m and D2 = 1.2 m are separated by an air space and have surface temperatures of T = 410 K and T2 = 300 K. (a) If the surfaces are black, what is the net rate of radiation exchange between the spheres, in W? 912 = W (b) What is the net rate of radiation exchange between the surfaces if they are diffuse and gray with &j = 0.5 and ɛ2 = 0.05, in W? 912 = i W (c) What is the net rate of radiation exchange if D2 is increased to 20 m, with ɛ2 = 0.05, ɛ = 0.5, and D = 0.8 m, in W? 912 = W (d) What is the net rate of radiation exchange if the larger sphere behaves as a black body (ɛ2 = 1.0) and with &j = 0.5, D2 = 20 m, and D = 0.8 m, in W? 912 = i W Physical Properties Mathematical Functions II
Two very large parallel plates are kept at uniform temperatures T1=800 K and T2=500 K, and have emissivities ε1=0.2 y ε2=0.7, respectively, as shown in the figure. Determine the net rate of radiation heat transfer between the two surfaces per unit surface area of the plates.
A furnace has the shape of a cylinder and has R = H = 2m as its dimensions. The temperatures on the base, top, and side surfaces of the furnace are kept constant at 500, 700, and 1200 K accordingly. All three surfaces are black. Determine the net rate of radiation heat transfer from or to the top surface when the system is operating at a steady state.
A 5 mm-thick steel firewall is suddenly exposed to a radiant heat source that can be approximated as a blackbody at 1000K. How long will it take for the surface to reach 500 K if the initial temperature of the wall is 300K?