6. Consider a plate solar collector placed horizontally on theflat roof of a house. The collector measures 1.5 m wide and4.5 m long, and the average temperature of the exposedsurface of the collector is 38°C. The emissivity of the exposedsurface of the collector is 0.9. Determine the rate of heatloss of the collector during a calm day, when the ambient airtemperature is 20°C and the effective temperature of thesky, for exchange for radiation is 10°C. Consider theconvection heat transfer coefficient of the exposed surfacequal to 14 W/m^2.K 1. A small gray sphere, with an emissivity coefficient of 0.5 anda surface temperature of 537°C, is located in a black bodywrap with a temperature of 35°C. For this system, calculatethe net rate of heat transfer per unit of surface area of thesphere.2. Gaseous oxygen is maintained at pressures of 2 atm and 1atm on the opposite sides of a rubber membrane, which hasa thickness of 0.5 mm, and the entire system is at25°C. What is the diffusive mass flow of gas through themembrane?DAB=0.21x10^-9 m^2/s; O = 16 g/mol3. Pure oxygen gas at 2 bar and 25°C is flowing through arubber hose of 10 m long, with 40 mm internal diameter and2 mm wall thickness. The external surface is exposed to anair stream in which the partial pressure of the gas is 0.1 bar.The diffusivity and solubility of the gas in the hose materialare 0.21x10^-9 m^2/s and 3.12x10^-3 kmol/m^3.bar.respectively. Determine the mass rate at which the gas leaksout of the hose.4. Consider the diffusion of gaseous hydrogen into iron, at T =293 K. Calculate the flow of the species if the concentrationgradient at a specific location is equal to dCa/dx=-1kmol/m^3.m.5. The wing of an airplane has a polished aluminum coating. Atan altitude of 1500 m (T = 5°C), does it absorb 100 W/m^2Of heat by solar radiation. Assuming that the inner surfaceof the wing lining is well insulated and that it has a rope of6m (that is, L = 6m), calculate the equilibrium temperatureof the wing at a speed of 150 m/s for a distance of x m fromthe front edge, where the convective coefficient is hx = 222W/m^2.K

Given Data: b=1.5 mL=4.5 mTc=38oCε=0.9T∞=20oCTs=10oCh=14 W/m2K To Find: The rate of heat loss of…

Consider a plate solar collector placed horizontally on the flat roof of a house. The collector measures 1.5 m wide and 4.5 m long, and the average temperature of the exposed surface of the collector is 38°C. The emissivity of the exposed surface of the collector is 0.9. Determine the rate of heat loss of the collector during a calm day, when the ambient air temperature is 20°C and the effective temperature of the sky, for exchange for radiation is 10°C. Consider the convection heat transfer coefficient of the exposed surface qual to 14 W/m^2.K

Consider a plate solar collector placed horizontally on the flat roof of a house. The collector measures 1.5 m wide and 4.5 m long, and the average temperature of the exposed surface of the collector is 38°C. The emissivity of the exposed surface of the collector is 0.9. Determine the rate of heat loss of the collector during a calm day, when the ambient air temperature is 20°C and the effective temperature of the sky, for exchange for radiation is 10°C. Consider the convection heat transfer coefficient of the exposed surface qual to 14 W/m^2.K

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Consider a very thin plate that is mounted and attached on a horizontal board. The plate is subject to an infrared lamp providing a uniform thermal radiation of 2000 W/m?. The plate absorbs 80% of the infrared irradiation and has an emissivity of 0.498. The plate is also exposed to an airflow of temperature of 20 °C and large surroundings with a temperature of 30 °C. The surface area of the plate is 1 m2 and it's surface temperature is measured to be at 104 °C. Required: Draw a clear and consistent schematic of the problem and label the operating conditions on the schematic. Perform systematic analysis, state your assumptions and justify the equation used and determine the convection heat transfer coefficient of airflow. (circle your final answer)
Determine the heat flow between the roof and floor of 4 × 3 m size of a furnace of 4 m × 4 m × 3m size when the roof is at 1200 K and the floor is maintained at 600 K, with the other surfaces non-absorbing and reradiating. The surface emissivity of the hotter surface is 0.8 and that of the cooler surface 0.6.
Consider a cylindrical tank with a surface temperature of 44°C which contains water. The height of the tank is 1.1 m and its diameter is 0.4 m. The tank is in a room at 20°C. If the surrounding temperature is also at 20°C, calculate the total rate of heat transfer from all surfaces of the tank by natural convection and radiation. Consider the emissivity to be 0.4. Assumptions: 1 Steady operating conditions exist. 2 Air is an ideal gas. 3 The local atmospheric pressure is 1 atm. Note. Report your solution step by step and clearly.
A concentric cylinder with outer and inner radii of 8 cm and 6 cm, respectively, has length of 1 mwith emissivities of the inner and outer radii at 0.4 and 0.6, respectively. Determine the heattransfer from the outer cylinder to the inner cylinder if the inner and outer temperatures are400K and 600K, respectively.
This experiment is conducted to determine the emissivity of a certain material. A long cylindrical rod of diameter D₁ = 0.01 m is coated with this new material and is placed in an evacuated long cylindrical enclosure of diameter D₂ = 0.1 m and emissivity 2 = 0.95, which is cooled externally and maintained at a temperature of 200 K at all times. The rod is heated by passing the electric current through it. When steady operating conditions are reached, it is observed that the rod is dissipating electric power at a rate of 16 W per unit of its length, and its surface temperature is 600 K. Based on these measurements, determine the emissivity of the coating on the rod. The emissivity of the coating on the rod is 0.1165
10-cm-diameter hemisphere in Figure Example 8-8 is maintained at a constant temperature soo°C and insulated on its back side. The surface emissivity is 0.4. The opening exchanges adiant energy with a large enclosure at 30°C. Calculate the net radiant exchange
Consider a shed with an 8-ftx12-ft base and 4-ft height. The temperature of the outer surface of the roof and the walls of the shed is to be maintained at least 20°C on a quiescent night when outside temperature is 0°C and sky temperature is -15°C. What is the total heat loss heat loss from the building?Ignore the heat transfer through the ground. Assume the emissivity of the walls and roofs is 0.75.
A tube pipe is heated to a temperature of 150°C with an outside diameter of 12cm and it’s enclosed in a large room of 20°C. Calculate the radiant heat loss per unit length, if the surface emissivity is 0.65.
A spherical instrumentation device with a diameter of 102.16 mm has an emissivity of 0.32. It is contained in a large space simulation chamber whose temperature is preserved at 64.1 K. If its daily operation is restricted to the temperature range 50.6
A particular furnace is shaped like a section of a cone. The top surface of the furnace is uniformly heated by a resistance heater. During operation, the top surface is measured to be 800 K and the power supplied to the resistance heater is 1750 W/m². The sidewall of the furnace is perfectly insulated with & = 0.2. If the emissivity of the top and bottom surfaces are ε = 0.5 and ε = 0.7, respectively, determine the temperatures of the sidewall and the bottom surface of the furnace. A₁ A2 A3 →→D₂ = 20 mm D₁ = 40 mm L = 50 mm
A one-dimensional plane wall is exposed to convective and radiative conditions at x = 0. The ambient and surrounding temperatures are T. exposed surface is a = 0.78. Determine the convective and radiative heat fluxes to the wall at x = 0, both in W/m2, if the wall surface = 20°C and Tsur = 40°C, respectively. The convection heat transfer coefficient is h = 20 W/m²-K, and the absorptivity of the temperature is T, = 30°C. Assume the exposed wall surface is gray, and the surroundings are large. gbonv i W/m? Tad i W/m2
Determine the heat flow between the roof and floor of 4 x 3 m size of a furnace of 4 m x 4 m x 3 m size when the roof is at 1200 K and the floor is maintained at 600 K, with the other surfaces non absorbing and reradiating. The surface emissivity of the hotter surface is 0.8 and that of the cooler surface 0.6.