An oil pump operating at steady state delivers oil at a rate of 10 lb/s through a 1-in.-diameter exit pipe. The oil, which can be modeled as incompressible, has a density of 70 lb/ft3 and experiences a pressure rise from inlet to exit of 40 lb-/in². There is no significant elevation difference between inlet and exit, and the inlet kinetic energy is negligible. Heat transfer between the pump and its surroundings is negligible, and there is no significant change in temperature as the oil passes through the pump. Determine the velocity of the oil at the exit of the pump, in ft/s, and the power required for the pump, in hp.

An oil pump operating at steady state delivers oil at a rate of 10 lb/s through a 1-in.-diameter exit pipe. The oil, which can be modeled as incompressible, has a density of 70 lb/ft3 and experiences a pressure rise from inlet to exit of 40 lb-/in². There is no significant elevation difference between inlet and exit, and the inlet kinetic energy is negligible. Heat transfer between the pump and its surroundings is negligible, and there is no significant change in temperature as the oil passes through the pump. Determine the velocity of the oil at the exit of the pump, in ft/s, and the power required for the pump, in hp.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Using the concept of mass balance, determine: i.) Mass flow rate m, and Total Solid (TS) fraction x1. ii.) Mass flow rate m2 and Total Solid (TS) fraction x2. m, kg/s A TS = X, m, kg/s TS = X2 10 kg/s 60% TS 9 kg/s 70 % TS 6 kg/s 90 % TS 2 kg/s 42 % TS
Q5. The pump shown in Figure 1 is pumping oil of a density = 860 kg/m and is powered by a 35-kW electric motor whose efficiency is 90 percent. The water flow rate through the pump is 100 L/s. The diameters of the inlet and outlet pipes are 8 cm and 12 cm, respectively, and the elevation difference across the pump is negligible. If the pressures at the inlet and outlet of the pump are measured to be 100 kPa and 500 kPa (absolute), respectively, determine the mechanical efficiency of the pump %3D Oil 100 L/s 會 500 kPa 7motor = 90% Motor 35 kW 100 kPa pump Figure 1
3. A hydraulic lift is shown below. The combined mass of the piston, rack, and car is 4000 lbm. The working fluid is water. There is no heat transfer to or from the water, and the internal energy of the water per unit mass is constant. The water may be considered incompressible. (a) Taking all the water in the reservoir, line, and hydraulic cylinder as the system (i.e., taking the closed-system approach), calculate the work necessary to raise the rack and car 1 ft (neglect the change in potential energy of the water in the system). (b) Repeat part (a), taking all the water plus the car and the rack as the system. (c) Repeat part (a), taking an open-system approach; choose as your system the volume of the hydraulic cylinder, excluding the piston, rack, and car. If the absolute pressure in the system is 1000 lbf/in², calculate the volume that must flow in to raise the car 1 ft. Reservoir Pump Hydraulic cylinder
Consider the Energy Equation as shown below. Which term represents the energy put into the system by a pump? P1 Z1+ Y P2 +hp =z2+ Y +h; +hL 2g 2g O P1 Y O hp O P2 Y
p46,#15 with illustration and explanation
A mixing vessel initially contains 3,766.6 lb of liquid fluid. The vessel is fitted with two inlet pipes, one delivering hot fluid at a mass flow rate of 0.916 lb/sec. Fluid exits through a single pipe at a mass flow rate of 1.373 lb/sec. Calculate the amount of fluid, in lb, in the tank after 41 mins.
Hi please show calculations or diagrams if required thank you
Steady-state flow exists in a pipe that undergoes a gradual expansion from a diameter of 6 in. to a diameter of 8 in. The density of the fluid in the pipe is constant at 60.8 lbm/ft³. If the flow velocity is 22.4 ft/sec in the 6 in. section, what is the flow velocity in the 8 in. section?
In an air conditioning system running at steady-state, m ̇ = 0.7 kg/s of refrigerant 3 134a in saturated liquid state at 48◦C flow through a throttling valve reducing its pressure to a value of p4 = 4 bars. The system is shown in Fig. 1. Then the refrigerant flows through the internal side of a heat exchanger exiting at saturated vapor with p5 = p4. Air enters the external side of the heat exchanger at T1 = 300 K and exits at T2 = 295 K moved by a fan ̇ Figure 1: Problem 1 that consumes WCV = 0.15 kW. Determine the mass flow rate of the air, in kg/s
A mixing vessel initially contains 3,936.2 lb of liquid fluid. The vessel is fitted with two inlet pipes, one delivering hot fluid at a mass flow rate of 0.216 Ib/sec and the other delivering cold fluid at a mass flow rate of 0.94 lb/sec. Fluid exits through a single pipe at a mass flow rate of 1.268 Ib/sec. Calculate the amount of fluid, in lb, in the tank after 24 minutes.
A closed system consists of gas of 2 kg initially in state 1 with p1 4bar and specific volume V1 = 1m /kg. The system undergoes a power cycle consisting of the following processes: Process 1-2: polytropic process to v2 = 2m3 /kg, p2 = 1bar; Process 2-3: isobaric compression to v1; Process 3-1: isochoric process to p1. Draw the cycle on a p – v (specific volume) diagram. Show the system states, cycle direction, and the cycle (net) work.
i need the answer quickly