An object with a mass of m = 5.05 kg is attached to the free end of a light string wrapped around a reel of radius R = 0.225 m and mass of M = 3.00 kg. The reel is a solid disk, free to rotate in a vertical plane about the horizontal axis passing through its center as shown in the figure below. The suspended object is released from rest 6.60 m above the floor. (a) Determine the tension in the string (in N). (b) Determine the magnitude of the acceleration of the object (in m/s2). |m/s2 (c) Determine the speed with which the object hits the floor (in m/s). m/s (d) Verify your answer to part (c) by using the isolated system (energy) model. (Submit a file with a maximum size of 1 MB.) Choose FileNo file chosen This answer has not been graded yet.

An object with a mass of m = 5.05 kg is attached to the free end of a light string wrapped around a reel of radius R = 0.225 m and mass of M = 3.00 kg. The reel is a solid disk, free to rotate in a vertical plane about the horizontal axis passing through its center as shown in the figure below. The suspended object is released from rest 6.60 m above the floor. (a) Determine the tension in the string (in N). (b) Determine the magnitude of the acceleration of the object (in m/s2). |m/s2 (c) Determine the speed with which the object hits the floor (in m/s). m/s (d) Verify your answer to part (c) by using the isolated system (energy) model. (Submit a file with a maximum size of 1 MB.) Choose FileNo file chosen This answer has not been graded yet.

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Similar questions

A piece of wood is pressed against a spindle sanding disk which is a uniform disk with a radius of 0.090 m, rotating at an initial angular velocity of 37.0 rad/s (ωi = 37.0 rad/s). This motion results in a constant tangential frictional force of magnitude f = 9.00 N and causes the sanding disk to come to a complete stop in = 25.0 s. (a) Small pieces of wood get removed from the large piece of wood with a speed equal in magnitude to the tangential velocity of the rim of the sanding disk (and in a direction tangent to the disk). What is thespeed of the pieces of wood when the disk is rotating at its initial angular velocity of ωi.(b) What is the angular acceleration α of the sanding disk.(c) How many revolutions does the disk complete before coming to a stop?
A small 0.400-kg object moves on a frictionless horizontal table in a circular path of radius 3.30 m. The angular speed is 6.63 rad/s. The object is attached to a string of negligible mass that passes through a small hole in the table at the center of the circle. Someone under the table begins to pull the string downward to make the circle smaller. If the string will tolerate a tension of no more than 113N, what is the radius of the smallest possible circle on which the object can move?
The circular disk of 270-mm radius has a mass of 36 kg with centroidal radius of gyration k⎯⎯k¯ = 235 mm and has a concentric circular groove of 105-mm radius cut into it. A steady force T is applied at an angle θ to a cord wrapped around the groove as shown. If T = 59 N, θ = 29°, μs = 0.08, and μk = 0.07, determine the angular acceleration α of the disk, the acceleration a of its mass center G, and the friction force F which the surface exerts on the disk. The angular acceleration α is positive if counterclockwise, negative if clockwise; the acceleration a is positive if to the right, negative if to the left; and the friction force F is positive if to the right, negative if to the left..
In the figure, a uniform sphere of mass m = 0.551 kg and radius r = 0.139 m is held in place by a massless rope attached to a frictionless wall a distance L = 2.31 m above the center of the sphere. Find (a) the tension in the rope and (b) the force on the sphere from the wall.
A weight of mass 1.32 kg is suspended by a string wrapped around a pulley wheel, which consists of a solid disk of mass 4.47 kg and radius 1.03 m. The system is released from rest. Over what vertical distance does the hanging mass move in 3.0 seconds? Ignore friction and drag forces, and assume that the string does not slip. Hint: If the string had 0 length, it would be obvious that the point mass contributes Ipt = mR² to the total rotational inertia, since the point mass would be directly stuck on the outside of the pulley. What's the difference if the string has nonzero length, so that the point mass hangs below the pulley as in the diagram? None at all! The pulley can't tell the difference between a point mass attached to it by a 0 length string or a 20 meter long string. All it knows is that there's a point mass m attached to its outer edge.
A uniform disk of mass m = 1.4 kg and radius R = 25 cm can rotate about an axle through its center. Four forces are acting on it as shown in the figure. Their magnitudes are F1 = 3.5 N, F2 = 3.5 N, F3 = 7.5 N and F4 = 3.5 N. F2 and F4 act a distance d = 2.5 cm from the center of mass. These forces are all in the plane of the disk. m = 1.4 kgR = 25 cmF1 = 3.5 NF2 = 3.5 NF3 = 7.5 NF4 = 3.5 Nd = 2.5 cm Write an expression for the magnitude τ1 of the torque due to force F1. Calculate the magnitude τ1 of the torque due to force F1, in N⋅m. Write an expression for the magnitude τ2 of the torque due to force F2. Calculate the magnitude τ2 of the torque due to force F2, in N⋅m. Write an expression for the magnitude τ3 of the torque due to force F3. Write an expression for the magnitude τ4 of the torque due to force F4. Calculate the magnitude τ4 of the torque due to force F4, in N⋅m. Calculate the angular acceleration α of the disk about its center of mass in rad/s2. Let…
A block of mass m1 = 2.05 kg and a block of mass m2 = 6.35 kg are connected by a massless string over a pulley in the shape of a solid disk having radius R = 0.250 m and mass M = 10.0 kg. The fixed, wedge-shaped ramp makes an angle of ? = 30.0° as shown in the figure. The coefficient of kinetic friction is 0.360 for both blocks. (c) Determine the tensions in the string on both sides of the pulley.
A uniform disk of radius 0.507 m and unknown mass is constrained to rotate about a perpendicular axis through its center. A ring with the same mass as the disk is attached around the disk's rim. A tangential force of 0.243 N applied at the rim causes an angular acceleration of 0.117 rad/s^2. Find the mass of the disk.
An object (with mass m = 6.20 kg) is attached to the free end of a massless string wrapped around a reel of radius R = 0.550 m and mass M = 4.00 kg. The reel is a solid disk, free to rotate in a vertical plane about the horizontal axis passing through its center, as shown in the figure. The suspended object is released from rest 3.50 m above the floor. Calculate the magnitude of the acceleration (in m/s2) of the object. Round your answer to 2 decimal places.Note: I=1/2 MR^2
A 15.0-kg bucket of water is suspended by a very light rope wrapped around a solid uniform cylinder 0.300 m in diameter with mass 12.0 kg. The cylinder pivots on a frictionless axle through its center. The bucket is released from rest at the top of a well and falls 10.0 m to the water. (a) What is the tension in the rope while the bucket is falling? (b) With what speed does the bucket strike the water? (c) write the kinetic equation as the bucket sink into the water, suppose the resistance force is proportional to the speed, the volume of bucket is V, and draw the free-body diagram.
Problem 1: A uniform thin rod of mass m = 4.4 kg and length L = 1.2 m can rotate about an axle through its center. Four forces are acting on it as shown in the figure. Their magnitudes are F; = 4.5 N, F, = 4.5 N, F3 = 12.5 N and F4 = 19.5 N. F, acts a distance d = 0.28 m from the center F, 45° F, of mass. 1 60° F 3 4 Part (a) Calculate the magnitude t, of the torque due to force F1, in newton meters. T = sin() cos() tan() 8 HOME asin() acos() sinh() cotan() E 5 atan() acotan() 1 2 3 cosh() tanh() cotanh() + END ODegrees O Radians vol BACKSPACE DEL CLEAR Submit Hint Feedback I give up! Part (b) Calculate the magnitude t, of the torque due to force F2 in newton meters. Part (c) Calculate the magnitude t3 of the torque due to force F3 in newton meters. Part (d) Calculate the magnitude tą of the torque due to force F, in newton meters. Part (e) Calculate the angular acceleration a of the thin rod about its center of mass in radians per square second. Let the counter-clockwise direction be…
A jewel smith wishing to buff a finished piece of jewelry attaches a buffing disk to his drill. The radius of the disk is 3.60 mm and he operates it at 2.25 x 10 rad/s (a) Determine the tangential speed of the rim of the disk. 181 m/s (b) The jeweler increases the operating speed so that the tangential speed of the rim of the disk is now 285 m/s. What is the period of rotation of the disk now? 7.94e-5x Your answer cannot be understood or graded. More Information s