Answered: An electronics device generates 32.7 W… | bartleby

Related questions

Question

An electronics device generates 32.7 W of heat energy during normal operation. The heat is dissipated from the top surface of the device to ambient air at 22°C. If the top surface area is 0.175 m² and the convection heat transfer coefficient is 7.654 W/m²· K, what will be the surface temperature (in °C) of the device [round your final answer to one decimal place]?

Expert Solution

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Blurred answer

Similar questions

A closed box is filled with dry ice at a temperature of -86.0 °C, while the outside temperature is 21.0 °C. The box is cubical, measuring 0.394 m on a side, and the thickness of the walls is 4.49 × 102 m. In one day, 3.76 × 106 J of heat is conducted through the six walls. Find the thermal conductivity of the material from which the box is made. Number Units
A container holds 76.5 liters of Oxygen at 266.2K and a pressure of 3.48 atmospheres. How much heat is required to raise the temperature of this gas to 310.6K, holding the volume constant? Give your answer in kJ. Treat the gas as an ideal gas.
How much energy is required to change a 31 g ice cube from ice at -11 °C to steam at 112°C? The specific heat of ice is 2090 J/kg °C, the specific heat of water is 4186 J/kg °C and the specific heat of steam is 2010 J/kg °C. The heat of fusion of water is 333000 J/kg and the heat of vaporization is 2.26 × 106 J/kg. Answer in units of J.
When the indoor temperature of a house is 25°C and the outdoor temperature is -8°C, the inside and outside surfaces of the glass are measured to be 21.4°C and 18.1°C. If the glass has an area of 3.06 m2 and a thickness of 6.23 mm, what is the rate of heat (in W) lost though the window [round your final answer to zero decimal places]? {kglass = 0.78 W/m∙K}
A 500 g copper cup has an initial temperature of 250 oK. If the specific heat of copper is 385 J kg-1 oK-1 and 2.5 x 104 J of heat are transferred into it, what is the final temperature of the cup in Kelvins?
The average thermal conductivity of the walls (including windows) and roof of a house in the figure shown below is 4.8 x 104 kW/m - °C, and their average thickness is 20.8 cm. The house is heated with natural gas, with a heat of combustion (energy given off per cubic meter of gas burned) of 9,300 kcal/m3. How many cubic meters of gas must be burned each day to maintain an inside temperature of 27.3°C if the outside temperature is 0.0°C? Disregard surface air layers, radiation, and energy loss by heat through the ground. m3 37.0 5.00 m 8.00 m 10.0 m
An air/gasoline vapor mix in an automobile cylinder has an initial temperature of 178 ∘C and a volume of 12.1 cm3. If the mixture is heated to 587 ∘C with the pressure and amount held constant, what will be the final volume of the gas in cubic centimeters?
You take an aluminum cylinder with a mass m = (315± 2) g out of a furnace at temperature T = (250 ± 5)C °and place it in a large bath of cool water. The final 1 temperature of the cylinder and water is T2 = (29 ±1) C° . How much heat flows from the cylinder to the water, and what are the absolute and relative errors in the heat transfer out of the cylinder? The heat transfer is given by Q = mc T ∆where ∆T is the change in temperature and c = (0.215± 0.005)cal/g C is ⋅t°he specific heat of aluminum.
An incandescent light bulb with a surface area of 0.0128 m2 and an emissivity of 0.87 has a surface temperature of 175.9°C. If the temperature of the surroundings are 22.6°C, what is the net rate of radiation heat transfer between the bulb and the surroundings? [round your final answer to one decimal place]? {σ = 5.6704 x 10-8 W/(m2∙K4)}
The tube in a heat exchanger has a 2-in inner diameter and a 3-in outer diameter. The thermal conductivity of the tube material is 0.5 Btu/h·ft·°F, while the inner surface heat transfer coefficient is 50 Btu/h·ft2·°F and the outer surface heat transfer coefficient is 10 Btu/h·ft2·°F. Determine the overall heat transfer coefficients based on the outer and inner surfaces.
A hot steel plate with a surface area of 2.47 m2 and a constant surface temperature of 161°C is exposed to ambient air at 23°C. If the convection heat transfer coefficient is 18.2 W/m2· K, what is the rate of heat transfer (in W) from the plate to the air [round your final answer to zero decimal places]?
What is the rate of heat transfer in J/s through the body's skin and the fat layer just beneath its surface? Treat the skin and fat as a single layer that is 1.20 cm thick. Assume the temperature of the inner surface of the layer corresponds to internal body temperature, or 36.7 °C, and the temperature of the outer surface of the layer corresponds to skin temperature, or 34.0 °C. Take the total surface area of the layer to be 1.50 m² and use a value of 0.413 W/(m-C°) for the average thermal conductivity of the layer. Number Units

SEE MORE QUESTIONS