An electric fan has the motor inside a sphere of 25 cm diameter, which a uniformly distributed gives heat source of 2500 W/m . A three blades of 50 cm long and 3 mm thickness and 15 cm wide are welded to the surface of the sphere. The convective heat transfer coefficient between the air and the blades is 15 Wmit,and the thermal conductivity of the sphere and the blade is 8 Wmic, and the ambient temperature is 5 c. What is the temperature of the blade at 35 cm from the sphere, and the heat transferred by the three blades.

An electric fan has the motor inside a sphere of 25 cm diameter, which a uniformly distributed gives heat source of 2500 W/m . A three blades of 50 cm long and 3 mm thickness and 15 cm wide are welded to the surface of the sphere. The convective heat transfer coefficient between the air and the blades is 15 Wmit,and the thermal conductivity of the sphere and the blade is 8 Wmic, and the ambient temperature is 5 c. What is the temperature of the blade at 35 cm from the sphere, and the heat transferred by the three blades.

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

A flux of 0.0016 Wb flows in a silicon sheet steel coil/core. The arrangement appears as shown below with the following dimensions: Ac = 0.0025 m? Core/gap area: Flux path length: le = 0.350 m lg = 0.0015 m N = 500 Air gap length: Number of turns: %3D A. What is the current, I, through the winding? B. What is the energy stored in the inductance? C. Assume that the current is given by i =9.75 sin (3147) A. What is the RMS voltage that would appear across the winding? D. Assume that the gap is removed from the arrangement with the flux path remaining at 0.350 m. For a flux of 0.0016 Wb, what is the inductance of the arrangement? E. What is the energy stored in the inductance with the gap removed?
An iron circuit with a small0.75 mm air gap is shown in Figure 1. A 6000 turn coil carries a current I = 18 mA which sets up a flux within the iron and across the air gap. The cross section of the iron is a consistent 0.8 cm2, and the mean length of the flux path is 0.15 m. a) Redraw the magnetic circuit using schematic symbols of an electric circuit with reluctance in each part of the circuit. b) State's Ohm's Law for magnetic circuit. c) By neglecting the effect of fringing, calculate the reluctance of the circuit. d) Find the flux within the core. N = 6000 Iron circuit (u, = 800 for iron). Figure 1
Dry air will begin to ionise when the electric field strength reaches about 3 MV/m (i.e. 3 x 106 V/m), resulting in electrical breakdown. This can result in a spark or arc discharge between conductors separated by air. Assume that you have two parallel conducting plates separated by air, with a large distance d between them, and you apply a voltage of V=10000 Volts to the plates, as seen in the Figure A4, and you gradually decrease the distance between the plates, while keeping the voltage constant. How close can you bring these two plates together, before an electrical spark flies from one plate to the other? For the value of the distance d between the plates you found above, calculate the capacitance of the resulting parallel plate capacitor, and the total charge q stored in the capacitor, if the area of the plates is 1m?. O10000v Figure A4
a. Plot the direction of flux at the main poles. b. Draw the current direction at the main poles. c. Draw the direction of flux at the auxiliary poles. d. Draw the current direction at the auxiliary poles. e. Show the direction of rotation by drawing a shape.
Lesson: Electric Machine'sPlease Quick
When one coil of a magnetically coupled pair has a current of 5 A, the resulting fluxes p11 and $12 are 0.40 mWb and 0.80 mWb, respectively. If the number of turns N1 and N2 are 500 and 1500, respectively, what is the self-inductance L2? 560 mH b. 1080 mH c. 540 mH d. 1060 mH a. ww ww
8. When one coil of a magnetically coupled pair has a current of 5 A, the resulting fluxes $11 and 12 are 0.40 mWb and 0.80 mWb, respectively. If the number of turns N1 and N2 are 500 and 1500, respectively, what is the self-inductance L2?
If a current pass through an inductive, .magnetic energy will store in the coil True O False O
With reference to the 2 attached circuits. Explain the principles and application of electromagnetic induction.
Solve all parts.
1. What is the reluctance of 10 cm diameter silicon steel of 2500 permeability with a mean length of 20 cm? A. 0.000201 cgs B. 0.000102 cgs C. 0.000212 cgs D. 0.000123 cgs 2. At what rate the flux must be varied to measure 12 V across the terminal of 300 turns coil? A. 0.05 Wb/s B. 0.04 Wb/s C. 0.03 Wb/s D 0.02 Wb/s
Good day! Attached are 2 questions. Thank you.