A water solution containing 10 wt.% acetic acid is added to a water solution containing 30 wt.% acetic acid flowing at the rate of 20 kg/min. The product P of the combination leaves at the rate of 100 kg/min. What is the composition of P? For this process:

Q: When 23.6 g of calcium chloride, CaCl2, was dissolved in water in a constant-pressurecalorimeter,…

A: Given that, Mass of CaCl2 = 23.6 g,  molar mass =111 g/mol Hence, moles of CaCl2 is calculated as:…

Q: An iron-carbon alloy initially containing 0.255 wt% C is exposed to an oxygen-rich and virtually…

A: Given data: Initial concentration of C = 0.255 wt % Surface concentration = 0.0 wt % Temperature =…

Q: A mixture of 70% Benzene and 30% Water enters distillation column #1 at a rate of 200 kg/h. One…

A:

Q: The air conditioning process in the humidifier, air at a dry bulb temperature of 25 ° C and RH of…

A: Given: Dry bulb temperature, Tdb = 25°C Initial air conditions: Relative humidity, RH1 = 35% Final…

Q: 50% by mass NaOH was diluted to 10% by the addition of water. The temperature of the 50% by mass…

A: Given: 50% at 65.6 °C by mass NaOH was diluted to 10% at 37.8 °C Enthalpy change by using NaOH/H2O…

Q: 1. Spent acid from a nitrating process contains 33.0% H,SO, and 36.0% HNO3. This acid stream is to…

A: Given: Spent acid from a nitrating process contains 33.0% H2SO4, and 36.0% HNO3 This acid stream is…

Q: An iron-carbon alloy initially containing 0.308 wt% C is exposed to an oxygen-rich and virtually…

A: Given:D=5.5×10-10m2sC0=0.308%Cs=0%Cx=0.231%t=6 h=21600 s

Q: One thousand kg/h of a 45 wt% acetone-in-water solution is to be extracted at 25oC in a continuous,…

A: a) The minimum solvent flow rate corresponds to an infinite number of equilibriumstages(1) Points…

Q: Carbon tetra chloride is to be removed from a polymer solution by bubbling dry air through it at 297…

A: When a liquid and its vapor are in contact in a closed system, they can reach a state of balance…

Distillation

Distillation is a process/technique to separate more volatile components from less volatile components using the principle of relative volatility. In chemical engineering, distillation is one of the most common and important topics that is involved in almost every industry and process.