() A wastewater sample is being analyzed to determine its BOD content. The sample is diluted in order to perform the test 295 ml, of distilled water are added to 5 ml of sample to fill the 300 ml BOD bottle. The bottle has an initial dissolved oxygen concentration of7.9 mg/L After incubating 5 days, the dissolved oxygen concentration is 45 mg/L a. What is the S-day BOD of the wastewater? h. The deoxygenation rate constant, k. is 0.013 day What is the ultin BOD of the wastewater?

() A wastewater sample is being analyzed to determine its BOD content. The sample is diluted in order to perform the test 295 ml, of distilled water are added to 5 ml of sample to fill the 300 ml BOD bottle. The bottle has an initial dissolved oxygen concentration of7.9 mg/L After incubating 5 days, the dissolved oxygen concentration is 45 mg/L a. What is the S-day BOD of the wastewater? h. The deoxygenation rate constant, k. is 0.013 day What is the ultin BOD of the wastewater?

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

C. What is the concentration UI SUINUS 5. Determine the size (diameter and depth) of the secondary clarifier (s) at a municipal activated sludge treatment facility: The wastewater flow is 25,000 m³/d, the recycle ratio (recycle sludge flow/wastewater flow) is 0.25. The suspended solids concentration is assumed to be 2500 mg/L in the activated sludge tank. The over flow rate is 50 m3/d- m2 and solids loading is 125 kg/d-m2. Estimate detention time if the depth is 4.5 m. What would be the weir loading? Department of Civil & Environmental Engineering P.O. Box 519 Mail Stop 2510, Prairie View, Texas 77446 w.pvamu.edu Phone (936) 261-1660/1665(dept) Fax (936) 261 1662 Ensuring o Using Zoom o
After primary treatment, a municipal wastewater contains 150 mg/L BOD5. The wastewater flow of 0.44 m³/s (10 MGD) is then treated in an activated sludge system with an SRT of 12 d and an HRT of 6 h. Given the biokinetic parameters tabulated below, determine the aeration volume (m³). Parameter Value 3d¹ 60 mg/L BODs 0.10 d¹ 0.6 mg VSS/mg BOD5 Hmax Ks ka Y
A groundwater borehole at USM engineering campus contains 3000 mg/L of TDS. The flow is 0.32 m³/s. The design TDS concentration of the product water is below 400 mg/L. The net pressure is 40 atm. The membrane manufacturer provides that the membrane has a water flux rate coefficient of 2.2 x 10-6 s/m and a solute mass transfer rate of 1.5 x 10-6 m/s. Calculate the membrane area required for the RO system.
6. After your flash mix the water was sent to a clarification basin that was 24 feet in diameter and 20 feet tall. What was the detention time in hours of 0.43 MGD? 5.4 hours 4.3 hours 3.8 hours 2.3 hours After the water leaves your sedimentation basin, it is ready for filtration. Your two filters measure 10 feet in diameter. What is the filtration rate is gpm for your flow of 0.43 MGD? 19 gpm/sq/ft 29 gpm/sq/ft 39 gpm/sq/ft 49 gpm/sq/ft You have had a filtration breakthrough (failure) and have brought your old roughing filtration system on line. The old filter is 8 feet square and 4 feet deep. What is the filtration rate in gpm/sq/ft for your flow of 0.43 MGD? 10.33 gpm/sq/ft 8.55 gpm/sq/ft 5.99 gpm/sq/ft 4.66 gpm/sq/ft
An activated sludge wastewater treatment system was designed and operated in a steadystate under the following conditions:• Reactor volume of 10,000 m3in total;• Sludge concentration (MLSS) of 3200 mg/L in the reactor;• Return sludge concentration at 8000 mg/L (the underflow of the secondary clarifier)• Each day, 400 m3 of underflow sludge (return sludge) was wasted as excesssludge;What is the average Sludge Residence Time (SRT)?
A complete mix activated sludge process treats 5 MGD of wastewater containing a total BOD5 concentration of 225 mg/L BOD5 to 20 mg/L BOD5, which is 75% soluble in both the influent and the effluent. The volume of the aeration basin is 111,400 ft3 and the MLSS concentration is 2500 mg/L. Determine the following: a) Detention time in the aeration basin (hr) b) F/M ratio c) Specific substrate utilization rate d) Substrate removal efficiency
A jar test reveals that the optimum alum coagulant dose is 50 mg/L at a pH of 8.1 and a temperature of 73 F. How many pounds per day of 49% alum are required for the whole plant? Total flow is 36 MGD with four parallel treatment plants, each designed for 12 MGD. Could use some guidance on setting up the equations.
Homework - A sample of wastewater was incubated for 7-days at 20°C and showed a BOD of 208 mg/L.. Assuming k=0.15 day', calculate: (i) Its 5-days BOD( ii) Its 10-days BOD (iii) Its ultimate BOD
As an operator of a wastewater treatment facility, you have learned that your plant runs well at an SRT (based on MLVSS (X) in the aeration basin) of 12 days. If today’s MLVSS (X) concentration is 2,700 mg/L and the RAS (Xr) concentration is 5,500 mg/L, how many L of sludge should you waste from the secondary clarifier today? Other design conditions: Average influent flow = 12,000 m3/d Influent soluble BOD = 150 mg/L Required effluent TSS = 30 mg/L Aeration tank Volume = 1,000 m3
A system is designed to treat contaminant X with two PFRs in series. The concentration of contaminant X entering the first PFR is 120 mg/L and the inflow is 420 L/s. The first PFR is 5000 m³ in size, and the contaminant reacts via first order kinetics with a k value of 0.50 (1/hr). The second tank is being built so that the treatment facility can meet the permit level for contaminant X of 9.4 mg/L. What size do they need to make the second tank in m³?
Assume that all solutions are prepared at 25 degrees celsius and the solutes arr completely dissolved. In the lead content analysis of a wastewater sample, 75.00 mL of the original sample was taken and diluted with 125.00 mL deionized water. The diluted sample was found to have a lead content of 19.2 ppb. What is the lead content (in pbb) of the original wastewater sample?
You have designed a treatment system for contaminant Z. The treatment system consists of two parts: (1) a pipe with a volume of 15 m3 and (2) a CSTR has a volume of 60 m3. The pipe feeds into the CSTR. The inflow to the pipe is 10 m3/d and the influent Z concentration at the start of the pipe is 2,500 mg/L. The effluent from the pipe has a Z concentration of 1500 mg/L. Assume the reaction is first order. What is the reaction rate constant in units of (1/day)?