A thin plate with a length of 0.4m is cooled by vertical suspension in a very large box filled with quiescent carbon monoxide at a temperature of 44°C. If the plate surface temperature is 80°C, please answer the following: 1. What is the thickness of the free convection boundary layer at the upper edge of the plate? 2. What is the velocity in the x-direction at half the plate length?

A thin plate with a length of 0.4m is cooled by vertical suspension in a very large box filled with quiescent carbon monoxide at a temperature of 44°C. If the plate surface temperature is 80°C, please answer the following: 1. What is the thickness of the free convection boundary layer at the upper edge of the plate? 2. What is the velocity in the x-direction at half the plate length?

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A vertical cylinder 1.5m height and 18 cm in diameter is maintained at 100° C in an atmosphere environment of 20˚ C. Calculate the heat loss by free convection from the surface of the cylinder. Use the following data: p=1.06 kg/m³ v= 18.97x106 m²/s, k-0.1042 W/mK and Pr=0.6975 Nu =0.1 (Ra)¹/3
Explain why convection happens more often in gases and liquids than solids.
A thin plate with a length of 0.5m is cooled by vertical suspension in a very large box filled with quiescent carbon monoxide at a temperature of 44°C. If the plate surface temperature is 80°C, please answer the following: 1. What is the thickness of the free convection boundary layer at the upper edge of the plate? 2. What is the velocity in the x-direction at half the plate length? 3. Calculate the average Nusselt number for the plate. Justify your choice of correlation
i need the answer quickly
Write the comparison between forced and free convection in a non-isothermal system?
Solve it correctly please. I will rate accordingly with 4votes but I need correct answer.
Unique characteristics of biologically active materials such as fruits, vegetables, and other products require special care in handling. Following harvest and separation from producing plants, glucose is catabolized to produce carbon dioxide, water vapor, and heat, with attendant internal energy generation. Consider a single apple, spherical in shape, diameter 80 mm, which is ventilated with air at 5°C and h= 7.5 W/m2.K. Within the apple thermal energy is uniformly generated at 4000.0J/kg.day. The density and thermal conductivity of the apple are 840 kg/m3 and 0.5 W/m.K. a. Derive an equation for temperature distribution inside the apple. Use the boundary conditions @r R, T = Ts, and @r=0, dT/dr 0. Ts is the surface temperature of sphere to be determined using convection equation. b. Determine the apple center and surface temperatures.
Thank you for answering this question. Please you specify each step as soon as possible. Good Luck! Thank you. If you want to cool a thin plate by natural convection quickly, will you hold it as shown in position (a) with the long dimension parallel to the direction of gravity or in position (b) with the shorter dimension parallel to the direction of gravity and why? Assume Laminar flow. (b)
Q1 (a) Differentiate between free and forced convection with examples. (b) Define Nusselt (Nu), Prandtl (Pr), Reynolds (Re) and Grashof (Gr) dimensionless numbers. State which numbers are used in free and forced convection to determine the heat transfer coefficient. (c) A vertical pipe 90 mm diameter and 2.5 m height is maintained at a constant temperature of 125 °C, The pipe is surrounded by still atmospheric air at 25 °C. Find heat loss by natural convection. Properties of water at 75 °C: Density = 1.0145 kg/m³ Kinematic viscosity = 20.55 x10-6 m²/s Prandtl number (Pr) = 0.693 Thermal conductivity (k) = 30.06 x 10-3 W/m K g × ß x L³ × AT Grashof number, Gr = V² Nu = 0.10(GrPr)0.333
The main body of plenum is a steel vessel of diameter 0.1meters has two semicircle domed ends. During operation is will contain mix of fuel and air at approximately 250OC. The wall of the vessel is 0.03meters thick and the plenum is 0.45meters long. Estimate the rate of heat loss from the vessel when the outside air temperature is 45OC. The thermal conductivity of steel is 45 W/m K and the surface heat transfer coefficient on the air side is 8 W/m2 . On the inside it is 65W/m2 . If it was possible to clad the plenum calculate the reduction in the rate of heat loss. Assume the lagging would be 5mm thick and has a thermal conductivity of 0.05 W/m.
A sphere of 74 mm diameter is moving through the air at a velocity of 0.035 m/s. The surface temperatureof the sphere is uniform at 40◦C and the air temperature is 20◦C. What is the average convection coefficientbetween the sphere and air