A tensile test specimen of stainless steel alloy having a diameter of 0.495 in. and a gage length of 2.00 in. was tested to fracture. Stress and strain data obtained during the test are shown. Determine the true fracture stress if the final diameter of the specimen at the location of the fracture was 0.350 in. Stress (ksi) 120 90- 60- 30 0- 0.0 0.0 Upper scale Lower scale 0.020 0.040 0.060 0.080 0.100 0.120 0.002 0.004 0.006 0.008 0.010 0.012 Strain (in./in.) O 300 ksi O 126 ksi O 237 ksi O 202 ksi O 261 ksi

A tensile test specimen of stainless steel alloy having a diameter of 0.495 in. and a gage length of 2.00 in. was tested to fracture. Stress and strain data obtained during the test are shown. Determine the true fracture stress if the final diameter of the specimen at the location of the fracture was 0.350 in. Stress (ksi) 120 90- 60- 30 0- 0.0 0.0 Upper scale Lower scale 0.020 0.040 0.060 0.080 0.100 0.120 0.002 0.004 0.006 0.008 0.010 0.012 Strain (in./in.) O 300 ksi O 126 ksi O 237 ksi O 202 ksi O 261 ksi

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The answer is one of the options below please solve carefully and circle the correct option Please write clear .
Determine the initial length of a tensile specimen that has a percentage of elongation as 43 % and the final length at fracture 67 mm.
The results of a tensile test are: Diameter of the specimen Gauge length Load at limit of Proportionality Extension at the limit of Proportionality Maximum Load : 10mm :40 mm :80kN : 0.06mm. :100 kN Calculate ultimate tensile stress and young's modulus.
Q: Choose the correct answer: 1- The true stress of metallic sample which was subject to the mechanical test is equal to which of the following values?? If you know that the sample radius before and after the fracture are (6.3mm) and (0.2in.) respectively, and the failure occurs at (65*10 psi)? 660MPA, 680.03 10ʻPa, 689.04 10’KPa, 710 10ʻPa
A structural component in the form of a wide plate is to be made of a steel alloy that has a fracture toughness of 77 MPa.m ¹/2 and a yield stress of 1400 MPa. Inspection of the plate has identified an internal through the thickness crack of length 7.7 mm. Assume a value of Y=1. What is the maximum stress the component should be subjected to in order to not undergo rapid fracture.
Correctly solve by using correct expression
A strain gauges system mounted at a point on a structural member that is subjected to multiaxial stress, where we have the following readings: Ex = 3.8 x104; &y = 5.5 x10-5; Ez = - 7.5 x10-5; Yy = 9.1 x104; %3D Determine the stress components if the member is made of an isotropic material with linear elastic behavior having the following elastic properties: Young's modulus E = 200 Gpa and Poisson's ratio v = 0.3; Select one: Ох %3D -100 Мра; оу %3D -50 Мра; о, %3D 30 Мра; Тху 3D 70 Мра; Ox = -75 Mpa; o, = -50 Mpa; 0z = 40 Mpa; Ty = 80 Mpa3; Oy = 300 Mpa; oy = -150 Mpa; 0z 3 100 Мра;B тyу = 100 Mpa; TOSHIBA
During a test, a copper specimen alloy having a diameter of 10.2 mm is applied with a tensile load of 8900 N. Given a maximum allowable elongation of 0.25 mm, determine the maximum length (mm) of the specimen before deformation.
1- The ultimate tensile strength of metallic sample is equal to which of the following values? If that the initial and final radius are (0.256in.) and (0.157in.) respectively. The failure occurs at maximum weight of (84*10 gm)? What is behavior type of sample? 559*10 (N/m2), as brittle behavior 620*10 (N/m2), as brittle behavior 620*10(N/m?), as ductile behavior 560MPA, as brittle behavior
the material had a tensile stress of 67.7 ksi then was unloaded. the original length of the specimen was 5.0 inches. show the line on the diagram you would expect the material to follow as the load was released. estimate the length of the specimen after all load was removed.
please includde scetch
In a tensile test for an aluminum alloy, the sample is 2 inches long and 0.5 inches in diameter. The proportional portion of the tension stress-strain diagram for an aluminum alloy is shown below. Determine the axial stress of the sample under a tensile load of 9 kips: ____ ksi. Pay attention to units and calculate your answer to 1 decimal place.