Answered: A steel rod with cross- sectional area…

A steel rod with cross- sectional area of 150 sq.mm. is stretched between two fixed points. The tensile load at 20 degrees Celsius is 5000N. Assume thermal coefficient = 11.7mm/cm-C and E=200

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A circular aluminum alloy [E = 70 GPa; a = 22.5 × 10-6/°C; v = 0.33] pipe has an outside diameter of 270 mm, a wall thickness of 13 mm, and a length of 5.5 m. The pipe supports a compressive load of 600 kN. After the temperature of the pipe drops 39°C, determine: (a) the axial deformation of the pipe. (b) the change in diameter of the pipe. Answer: (a) 8 = i AD = mm mm
The composite bar is subjected to a normal force P = 7500 lb as shown in the figure. The section of the composite bar is composed of two hollow tubes and a solid steel core. Determine the axial stress developed in each bar. Use Ecu = 18 x 106 psi, Est = 30 x 106 psi, and Ebr = 16 x 106 psi.
A circular aluminum alloy [E = 70 GPa; a = 22.5 x 10-6/°C; v=0.33] pipe has an outside diameter of 200 mm, a wall thickness of 5 mm, and a length of 5.4 m. The pipe supports a compressive load of 670 kN. After the temperature of the pipe drops 43°C, determine: (a) the axial deformation of the pipe. (b) the change in diameter of the pipe. Answer: (a) 6= i AD= i mm mm
The steel pipe shown has an outside diameter of 175 mm, a wall thickness of 18 mm, an elastic modulus of E = 200 GPa, and a coefficient of thermal expansion of ? = 11.7 x 10-6/°C. Using a = 335 mm, b = 870 mm, and ?= 60°, calculate the normal strains at Hand K after a load of P= 45 kN has been applied and the temperature of the pipe has been increased by 35°C O 16 mm, an e load of P= 45 kN has been applied and the temperature of the pipe has been increased by Answers: EH = Ek= H K με με
B) A steel rod with a cross sectional area of (12 mm 12 mm) is stretched between two fixed points. the tensil load at 20°C is 2 KN, what will be the stress at 5°C. assume a = 11.7*10 m/(m.°C) and E-200 Gpa.
The steel pipe shown has an outside diameter of 175 mm, a wall thickness of 18 mm, an elastic modulus of E = 200 GPa, and a coefficient of thermal expansion of ? = 11.7 x 10-6/°C. Using a = 335 mm, b = 870 mm, and ?= 60°, calculate the normal strains at Hand K after a load of P= 45 kN has been applied and the temperature of the pipe has been increased by 35°C O 16 mm, an e load of P= 45 kN has been applied and the temperature of the pipe has been increased by Answers: EH = Ek= H K με με
(a) 128.5 GPa circular rod of diameter 30 mm and length 200 mm is subjected to a tensile force. The axtension of rod is 0.09 mm and change in diameter is 0.0045 mm. What is the Poisson's ratio of the material of the rod? (a) 0.35 (b) 0.33 (c) 0.32 (d) 0.30
Determine the stresses for each segment when the temperature of the rigid bar is -45 degrees celsius. A close fit exists at both of the rigid supports when the temperature is 24 degrees celsius. Use E= 68 GPa and Coefficient of thermal expansion is 11.7 x 10^-6 per degrees Celsius.
Steel railroad rails 10 m long are laid with end-to-end clearance of 3 mm at a temperature of 15°C. (a) At what temperature will the rails just come in contact? (b) What stress would be induced in the rails at that temperature if there were no initial clearance? Use a = 11.7 x 106 /°C and E = 200 GPa.
A circular aluminum alloy [E = 70 GPa; a = 22.5 x 10-6/°C; v=0.33] pipe has an outside diameter of 225 mm, a wall thickness of 15 mm, and a length of 5.0m. The pipe supports a compressive load of 670 kN. After the temperature of the pipe drops 48°C, determine: (a) the axial deformation of the pipe. (b) the change in diameter of the pipe. Answer: (a) 8 = mm AD= i mm
A flat steel bar, 30 mm wide by 2 mm thick and 1.6 m long, is bent by couples applied at the ends so that the midpoint deflection is 23 mm. Compute the maximum stress in the bar. Use E =210GPA. Answer must be in MPa.
Help me asap. a 50m long bar lacks 10mm to fit exactly between two fixed supports at 15 deg C. The modulus of elesticity is 230GPa and the coefficient of thermal expansion is 0.0000117/deg C. Find A. The normal stress if the temperature increased to 55 degree Celsius B. Calculate the height of the projectile from the ground after 15 seconds. C. What is the temperature if after thermal expansion, the stress in the bar is 50MPa D. What is the temperature if after thermal expansion, the bar exactly fits between the two supports? E. Calculate the total deformation of bar if at 55 degree C, the bar will exactly fit between the two fixed supports.