A steel bar of thickness h is welded to a vertical support as shown in the figure. What is the shear stress in the throat of the welds due to the force F? h b = 50 mm, d = 51 mm, h= 5.4 mm, and F= 101 kN The shear stress in the throat of the welds due to the force Fis MPa.

A steel bar of thickness h is welded to a vertical support as shown in the figure. What is the shear stress in the throat of the welds due to the force F? h b = 50 mm, d = 51 mm, h= 5.4 mm, and F= 101 kN The shear stress in the throat of the welds due to the force Fis MPa.

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter8: Applications Of Plane Stress (pressure Vessels, Beams, And Combined Loadings)

Section: Chapter Questions

Problem 8.2.9P: A spherical tank of diameter 48 in. and wall thickness 1.75 in. contains compressed air at a...

See similar textbooks

Similar questions

A spherical tank of diameter 48 in. and wall thickness 1.75 in. contains compressed air at a pressure of 2200 psi. The tank is constructed of two hemispheres joined by a welded seam (see figure). (a) What is the tensile load/ (lb per in. of length of weld) carried by the weld? (b) What is the maximum shear stress rm2Xin the wall of the tank? (c) What is the maximum normal strain e in the wall? (For steel, assume E = 30 X 10 psi and v = 0.29.)
: A cylindrical tank with diameter d = 18 in, is subjected to internal gas pressure p = 450 psi. The tank is constructed of steel sections that arc welded circum fereiitially (sec figure). The heads of the tank are hemispherical. The allowable tensile and shear stresses are 8200 psi and 3000 psi, respectively. Also, the allowable tensile stress perpendicular to a weld is 6250 psi. Determine the minimum required thickness /minof (a) the cylindrical part of the tank and (b) the hemispherical heads.
Two steel rods are welded together (see figure): the seam is oriented at angle ? = 50°. The stresses on the rotated element are sx1=10 ksi, sy1= -12 ksi, and tx1y1= -5 ksi. Find the state of plane stress on the clement if it is rotated clockwise to align the x3 axis with the longitudinal axis of the rods.
are of 10 mm size and the weld length is 30 mm. loading F as shown in figure. Both legs of the fillets considering the minimum throat of the weld, the A fillet welded joint is subjected to transverse loading Fas shown in figure. Both legs of the fillets ere of 10 mm size and the weld length is 30 mm. If the allowable shear stress of the weld is 94 MPa, considering the minimum throat of the weld, the maximum allowable transverse load in kN is F
Flat steel A is welded to the wall as shown in the figure. The profile of the flat steel is rectangular with b = 8 mm, c = 60 mm. The distance s is 5 mm. Flat steel B is connected to flat steel A using two metric screws M12 and corresponding nuts. Calculate the maximum stress in the weld, if the a-measure is 5 mm.
A steel bar of thickness h is welded to a vertical support as shown in the figure. Find the safe force Fif the maximum allowable shear stress in the welds is Tallow. h The safe force is where b = 5.25 in, c= 7 in, d= 3 in, h = 0.3125 in, and Tallow = 25 kpsi. F kip.
The figure shows a roof truss and the detail of the connection at joint B. Members BC and BE are angle sections with the thicknesses shown in the figure. The working stresses are 70 MPa for shear in the rivets and 140 MPa for bearing stress due to the rivets. How many 20-mm-diameter rivets are required to fasten the following members to the gusset plate: (a) BC; and (b) BE?
3- A cylindrical thin-walled pressure vessel was made by welding components together in a helical pattern, as shown in the figure. If the internal pressure within the vessel is p = 0.3 MPa, determine the normal stress perpendicular to the weld line and the shear stress tangential to the weld line. 400mm t=8mm 20 5 weld line -X
A rectangular plate (0 =23°) is formed by welding two triangular plates shown in figure. The plate is subjected to a compressive stress of 2.3 MPa in the x-direction and a tensile stress of 13 MPa in the y-direction. Determine the normal and the shear stresses acting parallel to the weld. Weld Lütfen birini seçin: a. 10.664 MPa/5.50 MPa b. 0.3131 MPa/4.93 MPa c. None d. 0.0358 MPa/5.50 MPa e. 9.3175 MPa/6.09 MPa
Pravinbhai
As in the figure, a pressurized cylindrical container is made of 12 mm thick plate as shown in the figure. The pressure in the cylinder is given as 1400 kPa and axial load F = 70 kN. According to the cylinder's inner D = 1.5 m; Find the normal stress and shear stress occurring along the welding seams in the cylinder. 70 KN Kaynak dieis dule
A solid circular bar is welded to a structural member, as shown by a fillet weld all around the bar. Determine the leg dimension of the fillet weld, if P = 16 kN and permissible shear stress in weld is 70 kN / mm 2. Take : B= 100mm. P Bar Structural member 300 mm