A spherical gas-storage tank with an inside diameter of 31 ft is being constructed to store gas under an internal pressure of 204 psi. The tank will be constructed from structural steel that has a yield strength of 31 ksi. If a factor of safety of 3.0 with respect to the yiel strength is required, determine the minimum wall thickness required for the spherical tank. 2.02 in. 1.84 in. 1.15 in. O 1.32 in. 2.18 in.

A spherical gas-storage tank with an inside diameter of 31 ft is being constructed to store gas under an internal pressure of 204 psi. The tank will be constructed from structural steel that has a yield strength of 31 ksi. If a factor of safety of 3.0 with respect to the yiel strength is required, determine the minimum wall thickness required for the spherical tank. 2.02 in. 1.84 in. 1.15 in. O 1.32 in. 2.18 in.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The cylindrical portion of the propane tank has an outer diameter of 12.02 in. and a wall thickness of 0.13 in. Calculate the longitudinal stress (in psi) in the wall of the cylinder when the tank is pressurized to 162.2 psi.
A 2 m long metal cylinder with an external diameter of 700 mm and a wall thickness of 45 mm is filled with water at a pressure of 10 Bar. Young's modulus E = 80 GPa, Poisson's ratio v = 0.3 Calculate the hoop stress, oH, in megapascals (MPa) correct to two decimal places. MPa Calculate the longitudinal stress, OL, in megapascals (MPa) correct to two decimal places. MPa Hence, calculate the maximum strain, ɛH, in the cylinder. Enter your answer in micro-strain correct to two decimal places: EH micro-strain
Determine : 1.The sense and magnitude of the stresses induced in the composite if it is not restrained. 2. The sense and magnitude of the stresses induced in the composite if it is partially restrained with an allowed free expansion of 0,3 mm.
Determine the safe internal pressure of a cylindrical tank with a 500 mm internal diameter, 20 mm wall thickness and 3 meters length, if the stress is limited to 40 MPa. Select the correct response: 3.8 MPа 4.2 MPа 5.2 MPa 3.2 MPа
H5
' A rylindrical boiler with hemispherical ends has an outside diameter of 6 ft. lf the hoop and axialstresses in the boiler must be limited to 15 ksi and 8 ksi respectively, determine the thickness of steel plate required if the internal pressure in the boiler will be 200 psi.
The pressure tank shown is fabricated from spirally-wrapped metal plates that are welded at the seams in the orientation shown. The tank has an inside diameter of 60 in. and a wall thickness of 0.375 in. For a gage pressure of 325 psi, determine the magnitude of the shear stress parallel to the weld. O 611 ksi O452 ksi O 653 ksi O 3.77 ksi O 495 ksl
A spherical shell with 71.7-in. outer diameter and 67.21-in. inner diameter contains helium at a pressure of 1132psi. Compute the stress in the shell.
Solve for the maximum permissible internal pressure of the cylindrical pressure vessel. (The answer should be in psi) Where: Inner radius= 24 inches Wall thickness= 0.25 inches Yield point of the material= 300 MPa Safety factor= 3.0 adequate
A spherical gas-storage tank with an inside diameter of 26 ft is being constructed to store gas under an internal pressure of 187 psi. The tank will be constructed from structural steel that has a yield strength of 35 ksi. If a factor of safety of 3.0 with respect to the yield strength is required, determine the minimum wall thickness required for the spherical tank. 1.34 in. 1.25 in. 1.04 in. 1.59 in. 1.72 in.
A steel rod with a diameter of 25 mm and 831 mm long is heated to 203 °C from an initial temperature of 25 °C. Steel has a modulus of elasticity and coefficient of thermal expansion of 200 GPa and 11.7 x 10-6 /°C respectively. Determine the change in length in millimeters.
Part A - Stress-concentration factor due to a circular cutout Determine the stress-concentration factor KK due to the 15.0-mmmm-diameter circular cutout in the member. USE Figure A FOR SOLVİNG PROBLEM. K=? Part B - Stress-concentration factor due to the shoulder fillets Determine the stress-concentration factor KK due to the 10.0-mmmm-radius shoulder fillets in the member. USE Figure B FOR SOLVİNG PROBLEM. K=? Part C - Maximum applicable axial force P Using the information obtained about the stress-concentration factors in the member, determine the maximum applicable axial force PP that can be applied to the member. Pmax=? Part D - Maximum applicable axial force P without the circular cutout Using the information obtained about the stress-concentration factors in the member, determine the maximum applicable axial force PP that can be applied to the member if the circular cutout is not present. Pmax=?