a singly reinforced rectangular beam 300 mm wide and 600 mm deep is subject to a factored shear force Vu = 395 kN at the critical section for shear. The tensile bar centroid is 70mm from bottom of the beam. The stirrups if lightweight concrete strength is 25 Mpa. Solve for the required nominal shear strength (in kN) of 10-mm-diameter.

Q: Reinforce Concrete Design The beam section shown in the Figure 3 will carry the same loading…

A: Given values: Pu = 175 KN f' c = 30 MPa fy = 345 MPa b = 305 mm d = 510 mm Steel reinforcement: 5-25…

Q: A reinforced concrete beam has the following properties: fy= 60 ksi f= 6,000 psi • Aş = 7.07 in? • b…

A: The values given in the question are as follows: fy=60000 psi f'c=6000 psi As=7.07 in2 b=16 in d=30…

Q: The beam is loaded as shown below. Given the following properties bw = 305 mm PDL = 120 KN d = 590…

A: Answer  (A) Calculation of shear strength provided by the concrete We know that simplified equation…

Q: a singly reinforced rectangular beam 300 mm wide and 600 mm deep is subject to a factored shear…

A: Nominal shear strength of stirrup = total shear - nominal strength of concrete

Q: Example No.4: A simply supported beam (12 m) span fpi=1172 MPa and fe =fci 35 MPa. Find concrete…

A: Approach to solving the question: Detailed explanation: Examples: Key references:

Q: A prestressed concrete rectangular beam of size 300 x 900 mm is prestressed with an initial…

A: A prestressed concrete rectangular beam of Size, A = 300×900 mm. b=300 mmd=900 mm Initial…

Q: design load of 120 kN/m . The characteristic strengths of the concrete is Tck = 30 N/mm² and the…

A: D = 630 mm  L = 1.5m Vu = wxL = 180 KN

Q: CAN SOMEONE HELP ME SOLVE THIS REINFORCED/PRESTRESSED CONCRETE PROBLEM. USE NSCP 2015 A concrete…

A: We calculate the neutral axis x by equating compression force equals to tension force and then put…

Q: 1. The web has a width of 350 mm and the slab thickness and spaced at 6.5 feet center to center of…

A:

Q: Problem-7 A pre-tensioned rectangular concrete beam 150 mm wide and 300 mm depth is prestressed with…

A: Given- width=150 mmdepth=300 mmarea=50 mm2stress=1200 N/mm2modluar ratio m=6

Q: In reinforced beam having a width of 300 mm and an effective depth of 600 mm, carries a moment of 60…

A: Given data:  Width b= 300 mm  Effective depth d= 600 mm  Modular ration n = 9  In cracked analysis…

Q: A prestressed concrete rectangular beam of size 300 x 900 mm is prestressed with an initial…

A: Given a prestressed concrete rectangular beam of Size, A = 300×900 mm. b=300 mmd=900 mm Initial…

Q: A 4-m simply supported timber beam is to be designed to carry a total uniform load of 10 kN/m…

A:

Q: including its own weight. The prestressing tendon is 225mm from the bottom and produces an effective…

A:

Q: Design the slab reinforcement if the maximum positive moment is Mup=wul2/11. and the maximum…

A: L=3mSuperimposed DL=4.76 kPaLL =1.9 kPaSelf weigth=3.45 kPathickness=150 mmAssume,fc'=21 MPafy=345…

Q: A beam 10 meters long 400mm x 600mm in cross-section is post-tensioned with a tendon 550 sq. mm. in…

A: Data is as given

Q: 11.) A simply supported 11-m span beam, 300-mm wide by 530-mm deep, is pre-stressed by straight…

A:

Q: Compute the long-term deflection of the beam at midspan if it is constructed for almost 12 months…

A: The values given in the question are as follows: Width of beam(b)=300 mm Depth of beam(D)=450 mm…

Q: A rectangular beam 350 mm wide and effective depth of 500 mm is to be designed as subjected to an…

A: GIVEN : A rectangular beam 350 mm wide and effective depth of 500 mm is to be designed as subjected…

Q: Q-A rectangular 230 mm x 350 mm (effective depth) beam is given. The factored shear force acting at…

A: Given- Rectangular beam 230 mm×350 mm, Factored shear force- Fsf=80 kN, Permissible shear stress…

Q: Check the adequacy of a rectangular beam section with a width of 424 mm and an overall depth of 556…

A: To find Adequacy

Q: he slab is simply supported over a span of 7.5 m and carries a superimposed ccentricity of 40 mm.…

A: D.L = 3kpa L.L = 5kpa

Q: noment of the beam loaded shown. Use n=8. Calculate the compressive

A: consider figure for solution Applying compatablity condition at sopport B Deflection at sopport B =…

Q: Design the slab reinforcement if the maximum positive moment is Mup= wul2/11 and the maximum…

A:

Q: A rectangular beam has dimensions of 300 mm by 650 mm with an effective depth of 590 mm and is…

A:

Q: Figure3 Q3: A 400-mm-wide cantilever beam frames into the edge of a 400-mm-thick wall similar to…

A:

Q: 2nd: A simply supported 14-m span beam, 300-mm wide by 540-mm deep, is pre- stressed by straight…

A:

Q: A beam with a rectangular cross section of size 250 mm wide and 350 mm deep is prestressed by a…

A:

Q: A singly reinforced rectangular beam 300 mm wide and 600 mm deep is subject to a factored shear…

A:

Q: A rectangular 230 mm 350 mm beam is (effective depth). The factored shear force acting at a section…

A: Given-Rectangular beam Factored shear force-Permissible shear stress We have to find the design…

Q: The beam section shown in the Figure 3 will carry the same loading pattern in Problem No.3 , Figure…

A: Solution: Given: Load = 175 kN fc = 30 MPa  fy = 345 MPa b = 305 mm d = 510 mm

Q: A cantilever slab has a span of 2.40 m. It is 150 mm thick and has an effective depth d = 110 mm. It…

A: Given,  span ,l=3 m service live load = 8.5 kPa service dead load = 1.5 kPa compressive strength of…

Q: A pre-tensioned rectangular concrete beam 150 mm wide and 300 mm depth is prestressed with three…

A:

Q: A reinforced concrete beam used in a processing plant for fruits and vegetables has a beam width of…

A: Given data:- fc' = 24 MPa fy = 240 MPa b = 250 mm d = 400 mm As = 3-16 mm bars To Find :- 1. Stress…

Q: Determine the nominal load when the concrete strain of 0.003 and tensile st strain is 0.002075

A: According to given data  Given that Concrete strain = 0.003Tensile steel strain = 0.002075To find…

Q: A reinforced concrete T-Beam has a width of 800mm and a thickness of 50mm. It has an effective depth…

A: To calculate the compressive force of concrete in a reinforced concrete T-beam:Compressive force of…

Q: 11. In reinforced beam having a width of 300 mm and an effective depth of 600 mm, carries a moment…

A:

Q: Assume the section has cracked and use the transformed-area method to compute the required…

A:

Q: A simply supported prestressed concrete beam is of 25m span. The initial stress is 1000 MPA. The…

A:

Q: A beam with a rectangular cross section of size 250 mm wide and 350 mm deep is prestressed by a…

A:

Q: A rectangular beam section is limited to a size of b=250 mm and h=400 mm. Assume that bars in…

A: “Since you have posted a question with multiple sub-parts, we will solve first three sub-parts for…

Q: 1. The web has a width of 350 mm and the slab thickness is 100 mm. The beam has a span of 16.5 feet…

A:

Q: A singly reinforced rectangular beam 300 mm wide and 600 mm deep is subject to a factored shear…

A: Given:- The width of the rectangular beam = 300 mm  The depth of the beam = 600 mm  The factored…

Design criteria for structural loading

The different loads such as loads due to self-weight (dead load) and external loads such as live load, wind loads, seismic load, snow load, and other loads and load combinations that influence the design of a building are called structural loading. The nature of the applied load differs from changes in the location, design, and type of materials used. The design criteria require that structures must be designed and constructed to be able to withstand all load types that are expected to act upon the structure and render its usage for the designated purpose. The structural members such as beams, slabs, columns, and foundations help the structure to withstand the applied load. There are different institutes such as ASCE and ACI that provide building design codes to assure minimum safety requirements and quality of the structures.