not use ai please A shunt-wound 12-pole 500Kw dynamo, with simplex-lap wound armature has a terminal emf of 600V @ full-load. The armature is wound with 5,000 ft of copper wire of 40,000 cir mils cross section. Assuming 2 voltsdrop at the brushes, and neglecting the current in the field coils, calculate the emf which must be developed inthe armature at full-load. (ohms per circular mil-foot = 12)

Answered: Image /qna-images/answer/ce64670d-df6a-4dae-93d2-755537d78ad2.jpg

Answered: A shunt-wound 12-pole 500Kw dynamo,…

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter12: Power System Controls

Section: Chapter Questions

Problem 12.4P

See similar textbooks

Similar questions

A 220 V , 60 Hz , supply is connected to 200 – turn armature winding of reluctance 1.7x105 At / Wb . Find : the magnetizing reactance the rms values of the ( magneto – motive force , exciting and armature currents , magnetic fluxflu the inductance Draw the phasor diagram of the circuit
A four – pole dc generator armature is lap wound with 60coils. Each coil has 8 turns. Determine the flux/pole required to generate 200V at 1500 rev/min.
A 4-poled.c.shuntgenerator with a wave- wound armature has to supply a load of 500 lampseach of 100W at 250V.Allowing 10V for the voltage drop in the connecting leads between the generator and the loadand drop of 1V per brush, Calculate the speed at which the generator should bedriven.The magnetic flux per pole is 30 mWband the armature and shunt field resistance are respectively 0.05Nand 652.The number of armature conductors is 390.
The resistance of the field winding(copper wire) of a DC machine is 0.25 ohm at 25°C. When operating at full-load, the temperature of the winding is 75 °C. The temperature coefficient of resistance of copper is 0.00427 per °C at 0°C. Find the resistance of the field winding at full-load.
Can you solve the question ?
Q4/B/ What are the principal characteristics of a series DC motor? What are its uses? Core Mc
Electrical machines
A 250-V, 4-pole, wave-wound DC series motor has 782 conductors on its armature. It has armature, diverter and series field resistance of 0.15 ohm, 0.02 and 0.05 respectively. The motor takes a current of 40 A. Estimate its speed if it has a flux per pole of 25 mWb.
An 8-pole lap connected armature has 960 conductors, a flux of 40 mWb per pole and a speed of 400 rpm. Determine the emf generated.
Determine the efficiency of a 1500kVA, 2300 V, 3 –phase, Y – connected alternator which operates at rated output with a power factor of 80%. The DC armature resistance at 70º C between terminals is 0.08 ohm. The field takes 70 A at 120 V from the exciter equipment. Friction and windage losses are 15kW, iron loss is 35kW and stray load losses is 15 kW. Assume the effective armature winding resistance is 1.5 times the DC value. a. 94.56 % b. 90.31 % b. 93.35 % d. 92.62 %
A four-pole de machine has an armature of radius 12.5 cm and an effective length of 25 cm. The poles cover 75% of the armature periphery. The arma- ture winding consists of 33 coils, each coil having seven turns. The coils are accommodated in 33 slots. The average flux density under each pole is 0.75T. If the armature is lap-wound, Determine the induced armature voltage when the armature ro- tates at 1000 rpm.
The winding of a 4-pole alternator having 36 slots and a coil span of 1 to 8 is short-pitched by ........... degrees. 150 40. 90 20 Brushless excitation system consisting of: Stator field winding and power diodes stator and rotor field winding and capacitor stator and rotor field winding and power diodes Everything mentioned in the options Full Name : *

SEE MORE QUESTIONS

Recommended textbooks for you

Power System Analysis and Design (MindTap Course …

Electrical Engineering

ISBN:

9781305632134

Author:

J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:

Cengage Learning