A shunt generator supplies a 34kW load at 225V through cables of resistance, R = 126m2. If the field winding resistance, Rf =680 and the armature resistance, Ra =42m2. Determine the following below: The terminal voltage is, The e.m.f. generated in the armature is, A 4 pole generator with wave wound armature has 50 slots each having 28 conductors. The flux per pole is 0.01 Wb. (i) At what speed must the armature rotate to give an induced EMF of 235V is, (ii) What will be the voltage developed, if the winding is lap connected and the armature rotates at the same speed is,

A shunt generator supplies a 34kW load at 225V through cables of resistance, R = 126m2. If the field winding resistance, Rf =680 and the armature resistance, Ra =42m2. Determine the following below: The terminal voltage is, The e.m.f. generated in the armature is, A 4 pole generator with wave wound armature has 50 slots each having 28 conductors. The flux per pole is 0.01 Wb. (i) At what speed must the armature rotate to give an induced EMF of 235V is, (ii) What will be the voltage developed, if the winding is lap connected and the armature rotates at the same speed is,

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

A 4-pole lap winding generator with 16 slot, 42 conductor per slot, 480v runs at 1800rpm. Find the flux produced per pole
Calculate the phase and line voltages of three phase star-connected 4 pole smallalternator having a total flux per pole of 0.30 Wb. Each phase has a concentratedwinding of 10 full pitched turns and relative velocity between armature and field fluxis 1500 rpm
In a Three-phase alternator, a given field current produces an armature current of 250 A on short-circuit and a generated e.m.f. of 1500 V on open-circuit. Calculate the terminal p.d. when a load of 250 A at 6.6 kV and 0.8 p.f. lagging is switched off. Calculate also the regulation of the alternator at the given load. Subject: Electrical engineering
A 6 pole DC wave wound generator has 22 armature conductors with flux per pole is 24 mWb and the e.m.f generated is 60 V, then the speed of the machine is O 0.51 rps O 113.64 rps O 37.88 rps O 5.09 rps
2- Draw and explain the phasor diagram for two transformers in parallel.
The field system is the rotating part of the DC Generator Select one: True False
A 4-pole DC generator runs at 650 rpm and generates an EMF of 200 V. The armature is wave wound and has 750 conductors. If the total flux from each pole is 0.015 wb, then what is the leakage coefficient ?
q3
A 6 pole DC wave wound generator has 30 armature conductors with flux per pole is 25 mWb and the e.m.f generated is 79 V, then the speed of the machine is O 105.33 rps O 5.06 rps 0.51 rps O 35.11 rps
The reactance of a generator is given as 0.1 pu based on the generator of 17 KV, 300 MVA. Determine the pu reactance on a base of 17 KV, 250 MVA. New pu reactance is.......
Draw the per-phase equivalent circuit of a three-phase squirrel-cage induction machine. List all of the elements in the equivalent circuit and briefly state their function
A 6 pole wave wound d.c. shunt generator has 500 conductors. A generator delivers 50 kW of power at 250 voltage at full load. The resistance of the field circuit is 125 2. Actual brush shift is 10°. Then find the demagnetizing and cross magnetizing ampere turns per pole and how many additional turns must be wound on each pole to eliminate the demagnetizing effect.