A reducing elbow as shown in Figure 5.1 is used to turn water flow at a rate of 0.4 m/s ina horizontal pipe at an angle of 135° while accelerating it. The inlet pressure to the elbowis 159kPa. The total volume of the elbow passage is 0.3 m between the two sections (1)and (2).Section(1)D - 400 mmFig 5.1 Schematic of reducing elbowa) Determine the gage pressure at the exit of the elbow.b) Detemmine the anchonng force needed to hold the elbow in place.

Name: A reducing elbow as shown in Figure 5.1 is used to turn water flow at
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: A reducing elbow as shown in Figure 5.1 is used to turn water flow at a rate of 0.4 m/s ina horizontal pipe at an angle of 135° while accelerating it. The inlet pressure to the elbowis 159kPa. The total volume of the elbow passage is 0.3 m between t

Answered: Image /qna-images/answer/2ce8d8ab-5f71-4a4d-bb73-954bdaa6a46e.jpg

Engineering

Mechanical Engineering

A reducing elbow as shown in Figure 5.1 is used to turn water flow at a rate of 0.4 m/s in a horizontal pipe at an angle of 135° while accelerating it. The inlet pressure to the elbow is 159kPa. The total volume of the elbow passage is 0.3 m³ between the two sections (1) and (2). Section (1)- D - 400 mm 135 200 mn action 1 Fig 5.1 Schematic of reducing elbow a) Determine the gage pressure at the exit of the elbow b) Detemnine the anchonng force needed to hold the elbow in place.

A reducing elbow as shown in Figure 5.1 is used to turn water flow at a rate of 0.4 m/s in a horizontal pipe at an angle of 135° while accelerating it. The inlet pressure to the elbow is 159kPa. The total volume of the elbow passage is 0.3 m³ between the two sections (1) and (2). Section (1)- D - 400 mm 135 200 mn action 1 Fig 5.1 Schematic of reducing elbow a) Determine the gage pressure at the exit of the elbow b) Detemnine the anchonng force needed to hold the elbow in place.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A centrifugal pump is used to pump water between two reservoirs as shown in the bellow figure. The dimensions and minor loss coefficients are provided in the figure. The pump rotates at 1600 rpm, the water inters the impeller normal to the blades and exits at an angle of 45° from radial. The inlet radius is 5.5-in, at which the blade width is 7.09-in. The outlet radius is 8.66-in, at which the blade width is 6.7-in. The volume flow rate is 23-cfm. Assuming 100 percent efficiency, calculate the net head produced by this pump in cm of water column height, the required brake horsepower in W and calculate the pump capability to pump water to upper reservoir. Reservoir z3-2, = 22.0 ft (elevation difference) D = 1.20 in (pipe diameter) KL. entrance = 0.50 (pipe entrance) KL. valve I = 2.0 (valve 1) KL. valve 2 = 6.8 (valve 2) Reservoir Valve 2 KL elbow = 0.34 (each elbow-there are 3) KLe L = 124 ft (total pipe length) e =0.0011 in (pipe roughness) = 1.05 (pipe exit) exit Pump Valve 1
The front and side views of a centrifugal impeller are shown in the figure below. All symbols have their usual meanings. The outer radius of the impeller is r2 = 0.4 m and the blade height at the impeller outlet b2₂ = 0.03 m. The volume flow rate of water (density = 1000 kg/m³) through the impeller is 0.2 m³/s. The outlet blade angle 8₂ = 50 degrees and the impeller rotational speed w=1600 rpm. Assume negligible losses, and the design conditions of whirl-free and shock-free entry. The impeller torque is B₂F N-m. Front View 12 b2 |+| Side View
Problem 2 - Pumps in Parallel Two 32-in pumps, with performance curve shown below, are combined in parallel to deliver water at 60°F through 1500 ft of horizontal pipe. If f = 0.025, what pipe diameter will ensure a flow rate of 35,000 gal/min for n = 1170 rev/min? 1170 r/min 800 50 NPSH 700 600 500 400 300 200 Total head, ft 0 36-in dia. 32-in dia. 28-in dia. 4 8 82% 85% 1500 bhp 87% 88% 3000 bhp, 3500 bhp 87% 2500 bhp 2000 bhp 12 16 20 24 U.S. gallons per minute x 1000 28 8 8 8 8 NPSH, ft 40 30 20
3b
What is the minimum power required from the pump to deliver the oil from Reservoir A to Reservoir B as shown in Figure 2 at a rate of 0.30m³/s? The pump has a 70% efficiency rating. V Reservoir A -Oil v= 10-5 m²/s p=950kg/m³ Elevation 135m Steel Pipe, ks =0.046mm, L= 200m, D=250mm Elevation 120m r/D=0.1 Pump Figure 2 r/d=1 Reservoir B abrupt Globe valve, wide open Air at 200kPa Elevation 110m Elevation 100m
The front and side views of a centrifugal impeller are shown in the figure below. All symbols have their usual meanings. The outer radius of the impeller is r2 = 0.4 m and the blade height the impeller outlet b₂ = 0.02 m. The volume flow rate of water (density = 1000 kg/m³) through the impeller is 0.5 m³/s. The outlet blade angle 3₂ = 35 degrees and the impeller rotational speed w=1600 rpm. Assume negligible losses, and the design conditions of whirl-free and shock-free entry. The gravitational acceleration g = 9.81 m/s². The theoretical (Euler) head is m. Front View P₂1 r2 b2- 118 Side View
Q4: A centrifugal pump running at 900 rpm and delivering 0.3 m³/s of water against a head of 25 m. The flow enters the vans radially, the normal velocity of flow through impeller is constant and equal to 3 m/s. If the pump efficiency is 82% determine the diameter and width of the impeller. The blade angle at outlet is 25°
A double acting pneumatic cylinder has a diameter of 160 mm. The rod is 50 mm diameter and the stroke is 160 mm. It must produce a pushing force of 10 kN. The flow rate available in both dirertions is 14 mm³ /minute. Calculate: (c) (i) The needed system pressure (ii) The force of retraction (iii) The velocity on the extension (iv) The velocity of retraction (v) The power used on the outstroke (extension motion)
Elevation = 100 ft D¸ = 1 ft (1) l (1) e, = 1000 ft D2 = 1 ft lz = 500 ft B V Elevation = %3D 20 ft (2) D3 = 1 ft (3) Elevation = l3 = 400 ft O ft Three open reservoirs are connected by pipes as shown above. It is assumed that the pipe diameter is equal to the friction factor of 0.03. Because theratio of the LIDpipe is large, the minor losses are ignored. Determine the flow in or out of each reservoir! Draw with sketch 5.
Water flows through the vertical elbow in Figure 2 and exits to atmosphere. The pipe diameter d, = 10 cm while d, = 3 cm. At flow rate of 0.0153 m3/s the pressure at section 1 is 2.33 bar. If the weight of water and elbow is 30 kg, determine the magnitude and direction of force to hold the pipe in place. y 40° 2
IM 2m A turbomachine has inner impeller diameter of 1000 g and outer diameter 2000 mm, with a uniform width of flow cross-section being 120 mm. Water enters radially at the inner impeller and exit at the outer impeller which has a blade angle of 62°. The flow rate through the machine is 4 m³/s while the rotation speed is 350 rpm. Take water density as 1000 kg/m³ and assume ideal flow conditions with no losses, and the absolute velocity of the inlet water is directed radially! (a) (b) (c) (d) (e) (f) Draw the velocity diagrammes at the inlet and outlet of an impeller, labelling the velocity components. What is the blade speed at the inlet? What is the absolute speed of the water at the inlet? What is the blade angle at the inlet? Find the absolute velocity of water at the outlet. Justify whether the machine is a pump or turbine by calculating the torques, acting on the blade.
Based on the rotor shown below, estimate the mass flow rate through the rotor if the density of the fluid is 800 kg/m and the height of the blade is 0.15 m. V2 = 277 m/s az = 30° %3D U2 = 325 m/s W2 U 152 m/s V = 121 m/s R2 = 0.5 m a = 450