A prop shaft of a heavy-duty truck has two bearings which are positioned at 3metres from each other. The shaft must rotate at 30 rad/s when the truck travelsat the speed of 40 m/s. Such a shaft carries two masses of (MA = 10 kg) and(MB = 5 kg) acting at the extremities of the arms 0.45 m and 0.6 m long,respectively. The planes in which these masses rotate are 1.2 m and 2.4 m, respectively, from the left end bearing supporting the shaft. The angle betweenthe arms is 60°. If the masses are balanced by two counter-masses (named xand Y) rotating with the shaft acting at a radius of 0.3 m and placed at 0.3 mfrom each bearing centre:2.1.Draw a diagram illustrating the position of masses on the shaft.2.2.Calculate the dynamic force in Newtons. Tabulate the results.2.3.Calculate the moment acting on the shaft in Newton-metre. Tabulate theresults.2.4.Determine the magnitude of the Y balance mass using a vector diagram.2.5Determine the magnitude of the X balance mass using a vector diagram.

As per the guidelines, I can solve only first three subparts at a time. For rest parts, repost in a…

A prop shaft of a heavy-duty truck has two bearings which are positioned at 3 metres from each other. The shaft must rotate at 30 rad/s when the truck travels at the speed of 40 m/s. Such a shaft carries two masses of (MA = 10 kg) and (MB = 5 kg) acting at the extremities of the arms 0.45 m and 0.6 m long, respectively. The planes in which these masses rotate are 1.2 m and 2.4 m,

A prop shaft of a heavy-duty truck has two bearings which are positioned at 3 metres from each other. The shaft must rotate at 30 rad/s when the truck travels at the speed of 40 m/s. Such a shaft carries two masses of (MA = 10 kg) and (MB = 5 kg) acting at the extremities of the arms 0.45 m and 0.6 m long, respectively. The planes in which these masses rotate are 1.2 m and 2.4 m,

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A 50 kg barrel with a diameter of .75 meters is placed on a 20° slope. Assuming the barrel rolls without slipping, what will the acceleration of the center of mass of the barrel be? (Solution: ax = 2.24 m/s²) 50 kg
A shaft is rotating with a mass of 2kg located at a distance of 300mm radius. Evaluate the balancing mass required at a distance of 10cm to be fixed in a rotating shaft. О а. 6.7 Kg O b. 0.67 Kg О с. 6 Kg O d. 0.6 Kg
1 and 2 are rolling cylinders connecting shafts A and B. 3 and 4 are cylinders fastened to these same shafts and slipping on each other at P. Find the diameters of 3 and 4 if the surface speed of 4 is twice that of 3.
A truck and trailer must be able to accelerate at 0.3 m/s up an incline of 1 in 20. The truck's engine generates a torque of 900NM. It has a moment of inertia of 30kg.m?. The efficiency of the truck's transmission is 83%. The mass of the truck is 12 tons, and that of the trailer is 9tons. The tractive resistance for both the truck and the trailer combined is 60N/ton. The truck has 12 wheels and the trailer has 8 wheels. The wheels on both vehicles are identical. Each wheel has a diameter of 1.2m, a mass of 75kg and a radius of gyration of 500mm. Determine two suitable overall gear ratios.
13 g = 10 m/s^2
On a flywheel with an inertia torque of 2.0 kg×m^2 is weight of 0.50 kg attached at a distance of 10 cm from the axis. The flywheel revolves around the horizontal axes with an average angular speed of 20 rad/s. By how much do the maximum and minimum angular velocity deviate from the average angular velocity? (The solution is +0.012 rad/s and -0.012 rad/s)
A circular solid disc of uniform thickness 20 mm. radius 200 mm and mass 20 kg, is used as a flywheel. If it rotates at 600 rpm, the kinetic energy of the flywheel, in Joules is (а) 395 (c) 1580 (b) 790 (d) 3160
A, B, C and D are four masses carried by a rotating shaft, the masses and eccentricity at B and C are (20 kg, 15 kg) and (150 mm, 140mm) respectively. The masses at A and D have an eccentricity of 170 mm. The angle between the masses at B and C is 90° and that between the masses at B and A is 200°, both being measured in the same direction. The planes containing masses A and B are 300 mm apart and that between B and C are 400 mm. If the shaft is in complete dynamic balance, determine : 1. The magnitude of the masses at A and D; 2. The distance between planes A and D ; and 3. The angular position of the mass at D
A helicopter is moving at an inertial speed of vo = 10 m/s while its rotor blades spin at w = 40 rad/s CCW. Consider a body frame B = {G, 6₁, 6₂, 6₂} that is located at the rotor hub and has ₁ axis aligned and rotating with one of the blades. The tip of another blade is located at position P with respect to the body frame, that is, rp/G = 3 b₁ + 3 b2 meters. 1. What is the inertial velocity Tvp/o of P with respect to O in frame I? Express your answer in terms of the unit vectors of frame I. Assume 0 = 15 deg. ხე. i3 22 i3 b1 i₁ 2. Now suppose that at the same instant as in Part A the rotor blade experiences a failure from a bird strike and a segment of the blade at P brakes off and is flung away from the helicopter at a body-relative speed Bvp/G = 20 6₂ m/s. What is the inertial velocity Tvp/o of P with respect to O in frame I? Express your answer in terms of the unit vectors of frame I. Bup/G b2 VO VO