Answered: A power station needs to store 10 kJ of… | bartleby

Related questions

Question

A power station needs to store 10 kJ of energy. What area parallel-plate
capacitor would be required if strontium titanate is used as dielectric and the
plate separation is 1 × 10¯6 m? The maximum voltage allowed is 1.0 kV.

Expert Solution

Trending now

This is a popular solution!

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Blurred answer

Similar questions

An air-filled parallel-plate capacitor has a capacitance of 2 pF. The plate separation is then halved and a wax dielectric is inserted, completely filling the space between the plates. As a result, the capacitance becomes 8 pF. The dielectric constant of the wax is:
The capacity of a battery to deliver charge, and thus power, decreases with temperature. The same is not true of capacitors. For sure starts in cold weather, a truck has a 500 FF capacitor alongside a battery. The capacitor is charged to the full 13.8 VV of the truck's battery. What is the ratio between the energy density per unit mass of the 9.0 kgkg capacitor system and the 130,000 J/kgJ/kg of the truck's battery.
A capacitor is constructed from two square, metallic plates of sides ℓ and separation d. Charges +Q and -Q are placed on the plates, and the power supply is then removed. A material of dielectric constant κ is inserted a distance x into the capacitor as shown in the figure below. Assume d is much smaller than x. Suggestion: The system can be considered as two capacitors connected in parallel. (Use the following as necessary: ε0, κ, ℓ, Q, d, and x.) (a) Find the equivalent capacitance of the device.Ceq = (b) Calculate the energy stored in the capacitor.U =
An initially uncharged air-filled capacitor is connected to a 3.29 V charging source. As a result, the capacitor acquires 9.89 x 10- C of charge. Then, while the capacitor remains connected to the charging source, a sheet of dielectric material is inserted between its plates, completely filling the space. The dielectric constant k of this substance is 7.61. Find the voltage V across the capacitor and the charge Qf stored by it after the dielectric is inserted and the circuit has returned to a steady state. V = V Qt = C
In a parallel-plate capacitor, the two plates each have an area of 0.460 m2 and are spaced 3.00 mm apart.The capacitor is charged to a voltage of 4.00 kV using a power source that is then removed. The gap between the plates is then filled by a dielectric layer. The charge on each plate stays constant at 2.50 kV despite the reduction in the potential difference between the plates.Calculate the initial capacitance value of the system.
A parallel plate, air filled capacitor, has plates of area 0.61 m2 and a separation of 0.1 mm.What is its capacitance? (Units: nF=10-9F)