A plane wall surface at 200°C is to be cooled with aluminum pin fins of parabolic profile with blunt tips. Each fin has a length of 25 mm and a base diameter of 4 mm. The fins are exposed to an ambient air condition of 25°C and the heat transfer coefficient is 45 W/m2·K. If the thermal conductivity of the fins is 230 W/m·K, determine the heat transfer rate from a single fin and the increase in the rate of heat transfer per square meter surface area as a result of attaching fins. Assume there are 100 fins per square meter surface area.

Q: Consider a 10m deep wall with a cross section as shown below. If the temperature on the left side of…

A:

Q: An IC with a surface area of 4,000 mm2 is cooled by a heatsink attached to its top surface.  The…

A: Given surface area of the IC, A=4000 mm2=4×10-3 m2. Manufacturer thermal resistance rating of the…

Q: The outside wall of a building consists of an inner layer of gypsum plaster, k = 0.17 W/ m K and 1.5…

A:

Q: A 30 mm diameter aluminium pipe is used to carry hot water, the external surface of the pipe is…

A: Given that, Diameter of Al pipe = d = 30 mm Convective heat transfer coefficient = h = 8 W/m2K…

Q: A 15 mm diameter cylindrical nuclear fuel rod is housed in a hollow ceramic cylinder concentric to…

A:

Q: ) The wall of a refrigerator is constructed of fiberglass insulation (k =0.035 W/m °C) sandwiched…

A:

Q: Rock has often been suggested as a medium for the thermal storage of energy. A cylindrical piece of…

A: “Since you have posted a question with multiple sub-parts, we will solve first three subparts for…

Q: Steam at 230°C is flowing through a steel pipe (k = 15.1 W/m-K) whose inner and outer diameters are…

A:

Q: An annular stainless steel (type 304) fin of thickness 4 mm and outside diameter 2 cm is attached to…

A:

Q: A 1.0 m × 1.5 m double glazed window consists of two 4 mm thick glass (k = 0.78 W / m K) layers…

A:

Q: A piece of beef steak 7 cm thick will be frozen in the freezer room -40 ° C. This product has a…

A: Given, Thickness of beef steak, d=7cm=0.07m Density of the product, ρ=970kg/ m3 Thermal conductivity…

Q: A pin fin of 2024-T6 aluminum has a length and diameter of 8.0 cm and 6.0 mm, respectively. The base…

A: Given Data Diameter =8cm  Length L=6 mm Q=2.50 watt h=30 W/m2K K=120 W/mK

Q: Consider 469 mm × 447 mm window in an aircraft. For a temperature difference of 98°C from the inner…

A:

Q: fer coefficient

A: Given   Radius, r1 = 7.5 mm                r2 = 17.5 mm                r3 = 55 mm The Heat transfer…

Q: A hot 5x5-cm² surface at base temperature Tb = 100°C is to be cooled by attaching 3-cm-long pin fins…

A:

Q: Problem-2: A 2.2-mm-diameter and 10-m-long electric wire is tightly wrapped with a 1-mm-thick…

A: The interface temperature and change in the interface temperature.Given:The radius of the wire is…

Q: Consider a large plane wall of thickness 2L=20mm. Both surfaces of the wall are convectively cooled…

A: we can get a solution by using a space increment of ∆x=2mm. The nodal network will yield 6 unknown…

Q: Consider a 10m deep wall with a cross section as shown below. If the temperature on the left side of…

A:

Q: The efficiency of a single cylindrical cross-section fin is 85%. The diameter of the fin is 13 mm…

A:

Q: consider the mass and pulley system in the attached file. mass m1 = 29 kg and mass m2 = 12kg. the…

A: Consider the total length of the rope to be l, the distance between block m1 and pulley be d and the…

Q: Electrically heated draw batch furnaces are commonly used in the heat treatment industry. Consider a…

A: Given data: Thickness, L = 20 mm K = 25 w/m* k T surr = 20 deg c = 293 K h = 10 w/m^2 * k Heat flux…

Conduction and Convection

When energy travels from one object to another it is said to have undergone heat transfer. Heat transfer is nothing but the transfer of thermal energy or internal energy from one thing to another, like e.g., when a vessel with water, kept on top of a burner, heats up because of the flame underneath it.