A Multi-layer wall of a building is shown in thefollowing figure. The thermal conductivity ofA, B, C, D, and E are: 30, 5, 1.67, 10.5, 6 W/mk, respectively. Assume one dimentional heattransfer. The area of A = D = E =4 m?, and B =C= 2 m². The thickness of each layer is 10 cm.The temperature of surface A is 25 °C, and thetemperature of surface E is 38 °C. Calculatethe heat transfer rate through the wall.BADEC

Answered: Image /qna-images/answer/9b4e485d-1451-4be6-a88b-86ed914c2b08.jpg

A Multi-layer wall of a building is shown in the following figure. The thermal conductivity of A, B, C, D, and E are: 30, 5, 1.67, 10.5, 6 W/m k, respectively. Assume one dimentional heat transfer. The area of A = D = E =4 m?, and B = C = 2 m2. The thickness of each layer is 10 cm. The temperature of surface A is 25 °C, and the temperature of surface E is 38 °C. Calculate the heat transfer rate through the wall.

A Multi-layer wall of a building is shown in the following figure. The thermal conductivity of A, B, C, D, and E are: 30, 5, 1.67, 10.5, 6 W/m k, respectively. Assume one dimentional heat transfer. The area of A = D = E =4 m?, and B = C = 2 m2. The thickness of each layer is 10 cm. The temperature of surface A is 25 °C, and the temperature of surface E is 38 °C. Calculate the heat transfer rate through the wall.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Related questions

Q: 4) A horizontal pipe 6 m long and 12.5 cm in diameter is maintained at a temperature of 150-C in a…

A: Length of the pipe, L=6 mPipe diameter, d=12.5 cm=0.125 mPipe temperature, Ts=150oC=150+273=423 KAir…

Q: H +x L→∞0 B The temperature at the base is 498 K, and the temperature of the surrounding fluid is…

Q: Consider a multi-layered walls of a storage building (no windows) that is made of three layers as…

Q: a) On a unit surface area basis, determine the rate of heat transfer into and out of the wall and…

A: From Fourier's Law q =-kdTdxx=0=-1d200-200x+30x2dxx=0=200-60*0= 200 W/m2

Q: -T2 L Determine the heat flux, in kW/m², and the unknown quantity for each case. T1 (°C) T2(°C)…

Q: A wood wall 2.5 m ( 8 ft) x 7 m ( 23 ft) x 2.5 cm ( 1 in) thick has thermal conductivity k=0.1 W/Km.…

A: Note: Since you have posted a question with multiple sub-parts, we will solve the first three…

Q: Two bars A and B, each of length 2m and cross sectional area 1m^2, are placed end to end. Their…

A: Given Thermal conductivity, kA = 339 W/mK kB = 837 W/mK…

Q: A large 100-mm thick steel plate is initially at uniform temperature T = 180°C at time t = 0. Both…

Q: The figure below shows the cross section of a wall made of white pine of thickness La and brick of…

Q: 1. An outside wall for a building consists of 10 cm layer of common brick and a 2.5 cm layer of…

A: Giventhickness of common brick (Lb)=10 cm=0.1 mthickness of fiber glass(Lf)=2.5 cm=0.025 mthermal…

Q: Steel pipe 5 cm thick, 1.0 m long and 12 cm deep, covered with 8 cm thick insulation. The wall…

Q: Hello, I have been having trouble analyzing the following situation related to the field of Heat…

Q: Q1 Passage of an electric current through a long conducting rod of radius r, and thermal…

A: The temperature distribution represents the temperature at finite points on the surface. The…

Q: Determine the temperature distribution (nodal temperatures) of the structure shown in the figure…

A: Given : The thermal conductivity is The convective heat transfer is The cross section area is The…

Concept explainers

Conduction and Convection

When energy travels from one object to another it is said to have undergone heat transfer. Heat transfer is nothing but the transfer of thermal energy or internal energy from one thing to another, like e.g., when a vessel with water, kept on top of a burner, heats up because of the flame underneath it.

Question

A Multi-layer wall of a building is shown in the
following figure. The thermal conductivity of
A, B, C, D, and E are: 30, 5, 1.67, 10.5, 6 W/m
k, respectively. Assume one dimentional heat
transfer. The area of A = D = E =4 m?, and B =
C= 2 m². The thickness of each layer is 10 cm.
The temperature of surface A is 25 °C, and the
temperature of surface E is 38 °C. Calculate
the heat transfer rate through the wall.
B
A
D
E
C

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

3- A large plane wall has a thickness L=50 cm and thermal conductivity k=25 W/m.K. On the left surface (x=0), it is subjected to a uniform heat flux go, while the surface temperature To is constant. On the right surface, it experiences convection and radiation heat transfer while the surface temperature is TL = 225°C and surrounding temperature is 25°C. The emissivity and the convection heat transfer coefficient on the right surface are 0.7 and 15 W/m²K, respectively. (a) Derive the temperature distribution equation for the wall parametrically (based on x, T₁, qo, L, and k). Plane wall Tsurr = 25°C T% = 25°C k = 25 W/m.K h = 15 W/m²K 90 ε = 0.7 T₁ = 225°C (b) Determine the temperature of the left surface of the wall at x=0? L x
Please help me with these questions An element on a hot stove is maintained at a constant temperature of Thot = 105 °C and a pan is placed on the element. The base of the pan can be taken to be a uniform circular layer of diameter 15 cm and thickness 7.0 mm, and with a thermal conductivity of 15 W m-1 K-1. a. The air above the pan comes into thermal equilibrium with the element. Write down the temperatures on the top and bottom surfaces of the pan and the rate of heat flow through the pan. Use the zeroth law of thermodynamics to explain your answer. A fan is then switched on so that the air above the pan is maintained at Tcold = 20 °C, and the system reaches a steady state. b. Identify the heat transfer mechanism that is being used to maintain the air at Tcold. c. Calculate the rate of heat transfer through the pan. A 3.0 mm thick layer of soup is added to the pan and the system again reaches a steady state. The temperature at the boundary between the pan and the soup is 95 °C. d.…
Steel pipe 5 cm thick, 1.0 m long and 10 cm deep, covered with 6 cm thick insulation. The wall temperature in the steel pipe is 100 ° C. The ambient temperature around the insulated pipe is 24 ° C. The convection heat transfer coefficient outside the insulation surface is 50 W / (m² K). The thermal conductivity of steel is 54 W / (m K), and the thermal conductivity of the insulation is 0.04 W / (m K). Count; a. Heat loss per meter of pipe = Answer watt. b. Temperature between steel pipe and insulation. = Answer ° C.
Steel pipe 5 cm thick, 1.0 m long and 12 cm deep, covered with 8 cm thick insulation. The wall temperature in the steel pipe is 100 ° C. The ambient temperature around the insulated pipe is 24 ° C. The convection heat transfer coefficient outside the insulation surface is 50 W / (m² K). The thermal conductivity of steel is 54 W / (m K), and the thermal conductivity of the insulation is 0.04 W / (m K). Count; a. Heat loss per meter of pipe = watt. b. Temperature between steel pipe and insulation. = ° C.
A wall of a house is made from two layers of bricks enclosing a layer of insulation. A radiator is positioned to cover the whole internal surface, and used intermittently when the internal temperature is low. The external surface is exposed to the outside air. Which of the following assumptions could be used to identify the relevant reduced form of the conduction equation to find the temperature in the wall. a. Conduction is mainly in two directions. b. Conduction is mainly in one direction. c. The wall properties are homogeneous. d. Steady conditions exist. e. Unsteady conditions exist. f. There is an internal volumetric heat generation in the wall.
The composite wall of an oven consists of three materials, two of which are ofknown thermal conductivity, kA = 25 W/m ⋅ K and kC = 60 W/m ⋅ K, and knownthickness, LA = 0.40 m and LC = 0.20 m. The third material, B, which is sandwichedbetween materials A and C, is of known thickness, LB = 0.20 m, but unknownthermal conductivity kB. Under steady-state operating conditions, measurementsreveal an outer surface temperature of Ts,o = 20°C, an inner surface temperature ofTs,i = 600°C, and an oven air temperature of T∞ = 800°C. The inside convection coefficient h is known to be 25 W/m2 ⋅K. Neglecting convection transfer effect,what is the value of kB?
What is the heat loss through the windows of a passenger train left outside a station in winter, assuming that the temperature inside the train is 20°C, outside the train, -20°C, total heat transfer area 40 m2. The thickness of glass wall may be taken as 0.5 cm. The thermal conductivity of glass is 0.88 W/(m.K).
The figure shows the cross section of a wall made of three layers. The thicknesses of the layers are L₁, L2=0.750 L₁, and L3 = 0.350 L₁. The thermal conductivities are k₁, k₂ = 0.840 k₁, and k3 = 0.780 k₁. The temperatures at the left and right sides of the wall are TH = 23 °C and Tc = -10 °C, respectively. Thermal conduction is steady. (a) What is the temperature difference AT2 across layer 2 (between the left and right sides of the layer)? If k2 were, instead, equal to 1.160 k₁, (b) would the rate at which energy is conducted through the wall be greater than, less than, or the same as previously, and (c) what would be the value of AT2? TH k₁ L₁ kg|kz kq L₂ L3 Tc
Consider 1D heat conduction in a Cu rod with an average temperature of 25C. Does there exist a maximum (or upper-limit value) temperature gradient for heat conduction. If so, what is that value with justification on the derivation/scientific reasoning. The thermal conductivity is k=385 W/m*K. The diameter of the rod is left in terms of d.
Looking for a handwritten solution as fast as possible.
ähäi 100 Q1: Consider a long resistance wire of radius r1 = 0.3 cm and thermal conductivity kwire = %3D 17 W/m•°C in which heat is generated uniformly as a result of resistance heating at a constant rate of q = 100 W/cm3 (see Figure below). The wire is embedded in a 1-cm- thick layer of ceramic whose thermal conductivity is kceramic =1 W/m.°C. If the center temperature of the resistance wire is measured to be Tc= 705°C, determine the temperatures at the surface of ceramic and the interface of the wire and the ceramic layer under steady conditions.
Q2: Write down the one-dimensional transient heat conduction equation for a plane wall with constant thermal conductivity and heat generation in its simplest form, and indicate what each term represents. Also, what is the units of every term?