A motor weighing 350 lb is supported by four springs, each having a con-stant of 750 Ib/in. The unbalance of the rotor is equivalent to a weight of1 oz located 6 in. from the axis of rotation. Knowing that the motor is con-strained to move vertically, determine (a) the speed in rpm at which reso-nance will occur, (b) the amplitude of the vibration of the motor at a speedof 1200 rpm. of

a) The resonant frequency is equal to the natural frequency of the system. Given, weight of the…

A motor weighing 350 lb is supported by four springs, each having stant of 750 lb/in. The unbalance of the rotor is equivalent to a we 1 oz located 6 in. from the axis of rotation. Knowing that the motor strained to move vertically, determine (a) the speed in rpm at whicl nance will occur, (b) the amplitude of the vibration of the motor at a

A motor weighing 350 lb is supported by four springs, each having stant of 750 lb/in. The unbalance of the rotor is equivalent to a we 1 oz located 6 in. from the axis of rotation. Knowing that the motor strained to move vertically, determine (a) the speed in rpm at whicl nance will occur, (b) the amplitude of the vibration of the motor at a

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A 4-kg collar can slide on a frictionless horizontal rod and is attached to a spring with a constant of 450 N/m. It is acted upon by a periodic force with a magnitude of P=P m sin wft, where Pm= 13 N. Determine the amplitude of the motion of the collar if (a) wf = 5 rad/s, (b) = 10 rad/s.
A Machine of mass 120 kg is supported on a springs which defect 26 mm under the load . The vibration of the machine on the springs is constrained to be and vertical , and a dash is in order to reduce the amplitude to one quarter of its value in three complete oscillations A the magnitude of the dumping required at speed ؟
A mass of flexible machine part, m, of 10 x 2 kg was observed to vibrate badly at frequency of 10 Hz. The vibration was caused by the application of a harmonic force, F of 10 x 10 N to the flexible part. A judgment was made by a mechanical engineer that the vibration was excessive because the frequency of the harmonic force coincides with the natural frequency of the flexible part. (c) Analyze the mass and stiffness of an absorber that would eliminate vibrations of the flexible part at frequency of 10 Hz, if the amplitude motion of the absorber mass, Xa at 10 Hz was observed to be 0.1 x 9 cm. (d) If the flexible machine part is operated in the speed range of 500 to 750 rpm, justify whether the design of vibration absorber in Q3(c) is safe to be used or not.
A mass of flexible machine part, m, of 10 ×10 kg was observed to vibrate badly at frequency of 10 Hz. The vibration was caused by the application of a harmonic force, F of 10 x 15 N to the flexible part. A judgment was made by a mechanical engineer that the vibration was excessive because the frequency of the harmonic force coincides with the natural frequency of the flexible part. (a) Interpret the phenomena occurred that explained by the mechanical engineer. If the flexible machine part was be modeled as a spring-mass-damper system, calculate the value of equivalent stiffness, k, of the system. Give final answer in unit of kN/m. (b)
A mass of flexible machine part, m, of 10 ×10 kg was observed to vibrate badly at frequency of 10 Hz. The vibration was caused by the application of a harmonic force, F of 10 ×15 N to the flexible part. A judgment was made by a mechanical engineer that the vibration was excessive because the frequency of the harmonic force coincides with the natural frequency of the flexible part. (c) Analyze the mass and stiffness of an absorber that would eliminate vibrations of the flexible part at frequency of 10 Hz, if the amplitude motion of the absorber mass, Xa at 10 Hz was observed to be 0.1 × 8 cm. (d) If the flexible machine part is operated in the speed range of 500 to 750 rpm, justify whether the design of vibration absorber in Q3(c) is safe to be used or not.
A body weighing 150 N, moves with simple harmonic motion. The velocity and acceleration of the body when it is 200 mm from the centre of oscillation, are 5 m/s and 20 m/s? respectively. Determine (a) amplitude of motion and (b) no. of vibrations per minute 11 A helical spring has a stiffness of 1 N/mm. What mass should be hung on it, so that it may oscillate with a periodic time of 1:5 second ? Ans(57 kg) 12
s): A light rod is supported at each end by two similar springs, each of stiffness 850 N/m, and carries two concentrated masses, each of 1 kg, one at one end and one in the centre, as shown in Fig.2. Determine the two natural frequencies of vibration of the system. Purw 850 N/m 1 kg 850 N/m 1 kg Fig. 2
A machine shaft running at an average speed of 360 r.p.m requires a constant torque of 1.5 kN-m during two revolutions and a constant torque of 400 N-m during next three revolutions and this cycle repeats. Determine the power of the motor required and moment of inertia of a flywheel in order that the total fluctuation of speed shall not exceed 6 percent of mean speed of 320 r.p.m.
The 8-kg uniform bar AB is hinged at C and is attached at and A to a spring of constant==k = 500 N/m. If end A is given a small displacement and released, determine (a) the frequency of small oscillations, (b ) the smallest value of the spring constant k for which oscillations will occur.
B9
A motor of mass M is supported by springs with an equivalent spring constant k The unbalance of its rotor is equivalent to a mass m located at a distance r from the axis of rotation. Show that when the angular velocity of the motor is wf, the amplitude of the motion of the motor is where
A helical spring with a mass of 6 kg has a mass of 10 kg attached to its free end. The mass is now pulled down to 40 mm from the equilibrium position and then released. Determine (a) the frequency of the oscilliation if the spring's stiffness is 532 N.m, (b) the angular velocity of the mass, (c) the instantaneous linear velocity and (d) the kinetic energy of the 10-kg mass when it is 30 mm from the equilibrium position.