A mixture of 40%-by-weight glycerin, 60% water, enters a smooth 0.113 m I.D. tube at 30°C. The tube is kept at 50°C, and mmixture 8 kg/s. The heat transfer coefficient inside the pipe is 1600 W/m²K. Plot the liquid temperature as a function of position in the pipe.

A mixture of 40%-by-weight glycerin, 60% water, enters a smooth 0.113 m I.D. tube at 30°C. The tube is kept at 50°C, and mmixture 8 kg/s. The heat transfer coefficient inside the pipe is 1600 W/m²K. Plot the liquid temperature as a function of position in the pipe.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

HEAT TRANSFER,PLEASE GIVE COMPLETE WORKING Hot air at 80ºC enters an 8-m-long pipe at a rate of 0.15 kg/s. The pipe is considered as thin wall with diameter of 20 cm. The wall of the pipe is observed to be nearly at isothermal at 60ºC. The fluid properties of the hot air is as given on Table 1. Determine: The temperature of the air at the exit of the pipe. The heat loss from the hot air. Table 1: Thermo-physical properties for hot air k = 0.02953 W/m·K µ = 20.96×10-6 N·s/m2 Pr = 0.7154 cp = 1008 J/kg·K
Local Nusselt number for fully developed (hydrodynamically and thermally) turbulent flow in a smooth circular tube is defined by Nup-hD/kr, where h, D, and ke are the convective heat transfer coefficient, tube diameter, and fluid thermal conductivity, respectively. The friction factor for the smooth circular tube is given by the Blasius correlation, f-0.316Rep. The Reynolds number is defined by Ren-pviD/, where pr, vi, and ur are the fluid density, fluid velocity, and fluid viscosity, respectively. The Blasius correlation is applicable to Rep<2×10¹. Considering the analogy between velocity and thermal boundary layers and using the Blasius correlation, express the local Nusselt number using Reynolds and Prandtl numbers in the form of Nup-AxRepxPr. The Prandtl number is defined by Pr-wa, where and are the fluid kinematic viscosity and fluid thermal diffusivity, respectively. Note that the local Nusselt number formula should be applicable to Rep<2x10 and 0.6
The sensible heat-transfer coefficient for a dry surface has been determined to be 50 W/(m2-C) at a certain Reynolds number. Estimate the total heat transfer to the surface per unit area at a location where the wall temperature is 10 C and the state of the moist air flowing over the surface is given by 24 C dry bulb and 18 C wet bulb. Assume that the Reynolds number does not change and the Lewis number is 0.82. Assume that the condensate present on the surface will increase the transfer coefficients by about 15 percent.
Saturated steam at 1 atm is condensed on the external surface of a copper tube withan outside diameter 16 mm and tube wall of thickness 0.5 mm. The tube is cooledinternally by water with a mass flow rate of 0.06 kg/s, which in turn is raised intemperature from 15 oC to 60 oC as it flows through the tube.Take the heat-transfer coefficient at the condensing side as 10.0 kW/m2K and theisobaric specific heat-capacity of water as 4180 J/kg K.i) Calculate the heat transfer rate to the cooling water. ii)
Liquid L D Liquid ammonia at -20°C (rho=665.1 kg/m³ and μ = 2.361*10-4 kg/m*s) is flowing through a 35 m long section of a 5 mm diameter copper tube at a rate of 0.1 kg/s then the Reynold's number is
Local Nusselt number for fully developed (hydrodynamically and thermally) turbulent flow in a smooth circular tube is defined by Nup-hD/kr, where h, D, and kr are the convective heat transfer coefficient, tube diameter, and fluid thermal conductivity, respectively. The friction factor for the smooth circular tube is given by the Blasius correlation, f-0.316Red ¹/4. The Reynolds number is defined by Rep-prviD/μr, where pr, vr, and ur are the fluid density, fluid velocity, and fluid viscosity, respectively. The Blasius correlation is applicable to Rep<2×10¹. Considering the analogy between velocity and thermal boundary layers and using the Blasius correlation, express the local Nusselt number using Reynolds and Prandtl numbers in the form of NuD-A-ReDxPr. The Prandtl number is defined by Pr-war, where and ar are the fluid kinematic viscosity and fluid thermal diffusivity, respectively. Note that the local Nusselt number formula should be applicable to Rep<2×10 and 0.6
can you please please please work it all out please
air is flowing inside of a pipe with radius=0.4 meters at a mass velocity of 29.4 kg/s*m2 at 322 K, with the walls of the pipe at 300 K. At the conditions of the experiment, the viscosity of air is 1.984 x 10-5 Pa*s, the density of air is 1.22 kg/m3, the heat capacity is 1 kJ/kg*K, and the thermal conductivity is 0.025 W/m*K. Determine the rate of heat loss by air per meter of duct.
The sensible heat-transfer coefficient for a dry surface has been determined to be 50 W/(m2-C) at a certain Reynolds number. Estimate the total heat transfer to the surface per unit area at a location where the wall temperature is 10 C and the state of the moist air flowing over the surface is given by 24 C dry bulb and 18 C wet bulb. Assume that the Reynolds number does not change and the Lewis number is 0.82. Assume that the condensate present on the surface will increase the transfer coefficients by about 15 percent
Compartnments A and B of the tern k Shown in the figure below are closed and filled with air end a liquid with el specific grauity equal to o.6. 3.5hpa(gauge) B Open to the et moshore 3.ocm air Liquid with e specific grauity =0.6 water mercary w th a specific grauity =13.6 O If the atumospheric press ure is lol kpa Cabr) and preffure gaugle reads 3.5trpa (gauge).determine the manometer reading, h.
Air is to be heated from 15 C to 270 C, as it flows through a tube 25mm diameter at average velocity 30 m/s. The tube surface is maintained at 280 C and the air is to be provided at rate 0.013 kg/s. Take the water properties k=0.0336 W/m.C, U = 25.9x 10-6 m2/s , Cp=1.014 kJ/kg.C, p = 0.8826 kg/ m3, Pr=0.689 Determine the following : 1- Heat transfer rate. 2- The necessary tube length. 3-Heat transfer coefficient?
Water at an inlet temperature of 10 C and a mass flow rate of m = 0.035 kg/s enters a tube of circular cross-section. The tube has a constant surface temperature of 30 C and an inside diameter of 10.2 cm, with a length of 58.2 meters. Find the heat transfer rate, q. Please show all steps.