A hungry bear weighing 700 N walks out on a beam in an attempt to retrieve a basket of goodies hanging at the end of the beam (see figure below). The beam is uniform, weighs 200 N, and is 6.00 m long, and it is supported by a wire at an angle of e = 60.0°. The basket weighs 80.0 N. Goodies (a) Draw a free-body diagram for the beam. (Submit a file with a maximum size of 1 MB.) Choose File No file chosen This answer has not been graded yet. (b) When the bear is at x = 1.00 m, find the tension (in N) in the wire supporting the beam and the components of the force exerted by the wall on the left end of the beam. T = Your response differs from the correct answer by more than 10%. Double check your calculations. N F. = (c) If the wire can withstand a maximum tension of 875 N, what is the maximum distance (in m) the bear can walk before the wire breaks? m

A hungry bear weighing 700 N walks out on a beam in an attempt to retrieve a basket of goodies hanging at the end of the beam (see figure below). The beam is uniform, weighs 200 N, and is 6.00 m long, and it is supported by a wire at an angle of e = 60.0°. The basket weighs 80.0 N. Goodies (a) Draw a free-body diagram for the beam. (Submit a file with a maximum size of 1 MB.) Choose File No file chosen This answer has not been graded yet. (b) When the bear is at x = 1.00 m, find the tension (in N) in the wire supporting the beam and the components of the force exerted by the wall on the left end of the beam. T = Your response differs from the correct answer by more than 10%. Double check your calculations. N F. = (c) If the wire can withstand a maximum tension of 875 N, what is the maximum distance (in m) the bear can walk before the wire breaks? m

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Related questions

Q: A 100 N object is suspended from two massless ropes that are attached to the ceiling. The rope to…

Q: The weight of the suspended object shown in the figure is 60.0 N. (a) Determine the tension in the…

A: Given Weight (w) = 60 N

Q: The pulley and all surfaces are frictionless. Suppose both blocks are made of solid gold. In…

Q: A bag of cement weighing 525 N hangs in equilibrium from three wires as suggested in the figure…

Q: A mule is harnessed to a sled having a mass of 211 kg, including supplies. The mule must exert a…

A: Given Data:- Mass of the mule is m=211 kg Minimum force required in order to get the sled moving is…

Q: A 6.00-kg ornament is held at rest by two light wires that form 30° angles with the vertical, as…

Q: A person is pushing a wheelbarrow along a ramp that makes an angle a = 39.0° with the horizontal.…

A: Since the wheelbarrow is moving with the constant velocity, thus the net force acting along the ramp…

Q: n the figure, a 1.15 kg ball is connected by means of two massless strings, each of length L = 1.69…

A: Given: The mass of the ball is 1.15 kg. The tension in the upper string is 54 N. L=1.69 md=1.69 m…

Q: The figure below shows a bird feeder that weighs 177.7 N. The feeder is supported by a vertical…

A: Given:Weight of bird feeder = 177.7 N

Q: A uniform plank of length 2.00 m and mass 28.5 kg is supported by three ropes, as indicated by the…

Q: 5. A 210-N mass is suspended from a horizontal beam by two cables that make angles of 29° and 53⁰…

Q: Your friend, who dislikes doing pushups, when she does a pushup from her knees,. You estimate your…

Q: A 200-kg robotic arm at an assembly plant is extended horizontally (see figure below). The massless…

Q: A crate weighing 4.83 102 N is lifted at a slow, constant speed by ropes attached to the crate at A…

Q: the steel I-beam in the drawing has a weight of 1.51 X 103 N and is being lifted at a constant…

A: The expression for the tension in each cable is,

Q: (a) A 2.29 kg salami is supported by a cord that runs to a spring scale, which is supported by…

Q: An object with mass (M1= 8 Kg) rests on a rough horizontal table and is connected by a cable that…

Q: The figure below shows two blocks connected by a string of negligible mass passing over a…

A: for equilibrium,for m1,T=m1*g= 9.0 kg x 9.8 m/s^2 = 88.2 N for m2,T=m2*g*sin(theta)so m2= 88.2N /…

Q: A traffic light weighs 234.0 N and is supported by two wires with an angle of 107.3° between them.…

A: Tension in each wire is 197.4 N. Explanation:

Q: Problem 1: A block with a mass of m = 28 kg rests on a frictionless surface and is subject to two…

Q: A 495 kg uniform beam is suspended by a vertically hanging rope at each end. The beam is tipped at…

Q: 37° T3

A: This question is based on Newton's laws of motion. We need to analyze the forces acting on the block…

Q: A diver of mass 71.7 kg stands on one end of a diving board of mass 36.4 kg, as shown in the…

Q: A cord passing over a pulley connects two masses, as shown, where m1 = 3.60 kg and m2 = 6.50 kg.…

A: From the given , description of the problem, the structure and masses are arranged as shown.

Q: A horizontal force of 130 N is applied to a stationary wooden box in one direction, and a 800 N…

Q: A diver of mass 66.5 kg stands on one end of a diving board of mass 20.3 kg, as shown in the…

A: The free-body diagram of the diving board is shown below. Here, m, M, and R are the mass of the…

Q: Two blocks with masses m1 = 24.8 kg and m2 = 79.8 kg, shown in the figure, are free to move. The…

Q: A window washer is standing on a scaffold supported by a vertical rope at each end. The scaffold…

A: The weight of the scaffold is, W=192 N The length of the scaffold is, L=3.1 m The mass of the worker…

Q: An Atwood machine consists of a pair of masses attached to each other by a cord that passes over a…

Q: Two blocks of mass M₁ and M₂ are connected by a massless string that passes over a massless pulley…

Q: A uniform plank of length 2.00 m and mass 29.5 kg is supported by three ropes, as indicated by the…

A: Given length of plank = 2.00 m mass of plank = 29.5 kg weight of person = W = 685 N person is at a…

Q: The figure above shows a massless beam, of length 4m, being held in place by a horizontal rope…

Concept explainers

Center of Gravity of a system

The centre of gravity is a property that is based on the geometry of a rigid body or any particle. It is described as an equilibrium point or a hypothetical location where the total weight of the body is concentrated.

Question

100%

A hungry bear weighing 700 N walks out on a beam in an attempt to retrieve a basket of goodies hanging at the end of the
beam (see figure below). The beam is uniform, weighs 200 N, and is 6.00 m long, and it is supported by a wire at an angle
of e = 60.0°. The basket weighs 80.0 N.
Goodies
(a) Draw a free-body diagram for the beam. (Submit a file with a maximum size of 1 MB.)
Choose File No file chosen
This answer has not been graded yet.
(b) When the bear is at x = 1.00 m, find the tension (in N) in the wire supporting the beam and the components of the
force exerted by the wall on the left end of the beam.
T =
Your response differs from the correct answer by more than 10%. Double check your calculations. N
F. =
(c) If the wire can withstand a maximum tension of 875 N, what is the maximum distance (in m) the bear can walk before
the wire breaks?
m

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step 3

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 3 steps with 4 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, physics and related others by exploring similar questions and additional content below.

Similar questions

A bag of cement weighing 525 N hangs in equilibrium from three wires as suggested in the figure below. Two of the wires make 62.0⁰ and 02 = 43.0° with the horizontal. Assuming the system is in equilibrium, find the tensions T₁, T2, and T3 angles 0₁ 1' in the wires. T₁ = 0 = Consider the net force at the point where the three wires come together. What is the acceleration of this point? N 0.53 X T₂ = The horizontal component of your T₁ is not equal to the horizontal component of your T₂, so the object would be accelerating horizontally. N T3 = 525 N 201 T₁ CEMENT T3 0₂ T₂ Fg
The figure below shows a bird feeder that weighs 101.1 N. The feeder is supported by a vertical wire, which is in turn tied to two wires, each of which is attached to a horizontal support. The left wire makes a 60° angle with the support, while the right wire makes a 30° angle. What is the tension in each wire (in N)? A bird feeder is suspended from a vertical wire. The top of the wire is tied to two other wires. The left and right wires go up and to the left and up and to the right, respectively, from the connection point to a horizontal support. The left wire makes an angle of 60° with the support. The right wire makes an angle of 30° with the support. left wire Nright wire Nbottom wire N
A crate that has a mass of 65.1 kg is held in equilibrium by two ropes as shown in the figure. Find the tension (in Newtons) in rope 1 if a = 33.2 0.
A tightrope walker is standing still with one foot on the tightrope as shown in the figure below. If the tightrope walker weighs 139 pounds, find the magnitudes of the tension in the rope toward each end of the rope. Assume E = 75.5° and F = 83.5°. (Round each answer to the nearest whole number.) |CB| = lb |CA| = lb
A setup similar to the one shown in the figure below is often used in hospitals to support and apply a horizontal traction force to an injured leg. (Let m = 5.25 kg and 8 = 75.0°.) (a) Determine the force of tension in the rope supporting the leg. N (b) What is the traction force exerted to the right on the leg? Additional Materials еВook
Answer the question correctly. Thank you!
A 28.9 kg mass (m) is suspended by the cable assembly as shown in the figure. The cables have no mass of their own. The cable to the left (7₁) of the mass makes an angle of 0.00° with the horizontal, and the cable to the right (T2) makes an angle (02) of 32.2°. If the mass is at rest, what is the tension in each of the cables, T₁ and T2? The acceleration due to gravity is g = 9.81 m/s². T₁ = T₂ = N N T₁ m T₂ 0₂
A 20.4 kg mass (m) is suspended by the cable assembly as shown in the figure. The cables have no mass of their own. The cable to the left (T) of the mass makes an angle of 0.00° with the horizontal, and the cable to the right (T2) makes an angle (02) of 30.1°. If the mass is at rest, what is the tension in each of the cables, T and T2? The acceleration due to gravity T, T, is g = 9.81 m/s². N T1 = m N T2 =
The steel I-beam in the drawing has a weight of 1.51 × 103 N and is being lifted at a constant velocity. What is the tension in each cable attached to its ends?
The figure below shows a bird feeder that weighs 100.1 N. The feeder is supported by a vertical wire, which is in turn tied to two wires, each of which is attached to a horizontal support. The left wire makes a 60° angle with the support, while the right wire makes a 30° angle. What is the tension in each wire (in N)