A hollow cylinder of outer radius R = 11 cm and mass M = 68 g with moment of inertia about the center of mass I com = MR2 starts from rest and moves down an incline tilted at an angle 0 = 27° from the horizontal. The center of mass of the cylinder has dropped a vertical distance h = 152 cm when it reaches the bottom of the incline. The coefficient of static friction between the cylinder and the surface is u s. The cylinder rolls without slipping down the incline. What is the magnitude of the velocity of the center of mass of the cylinder when it reaches the bottom of the incline? (Your answer must be in units of m /s and include 2 digit after the decimal point. Maximum of 5% of error is accepted in your answer. Take g=9.80 m /s2.) h

A hollow cylinder of outer radius R = 11 cm and mass M = 68 g with moment of inertia about the center of mass I com = MR2 starts from rest and moves down an incline tilted at an angle 0 = 27° from the horizontal. The center of mass of the cylinder has dropped a vertical distance h = 152 cm when it reaches the bottom of the incline. The coefficient of static friction between the cylinder and the surface is u s. The cylinder rolls without slipping down the incline. What is the magnitude of the velocity of the center of mass of the cylinder when it reaches the bottom of the incline? (Your answer must be in units of m /s and include 2 digit after the decimal point. Maximum of 5% of error is accepted in your answer. Take g=9.80 m /s2.) h

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Similar questions

An old grindstone, used for sharpening tools, is a solid cylindrical wheel that can rotate about its central axle with negligible friction. The radius of the wheel is 0.330 m. A constant tangential force of 200 N applied to its edge causes the wheel to have an angular acceleration of 0.804 rad/s2. (a) What is the moment of inertia of the wheel (in kg · m2)? kg · m2 = (b) What is the mass (in kg) of the wheel? kg= (c) The wheel starts from rest and the tangential force remains constant over a time period of 4.50 s. What is the angular speed (in rad/s) of the wheel at the end of this time period? rad/s=
A bicycle tire has a mass of 2.52 kg and a radius of 0.348 m. (a) Treating the tire as a hoop, what is its moment of inertia about an axis passing through the hub at its center? kg · m2 (b) What torque is required to produce an angular acceleration of 0.738 rad/s2? N · m (c) What friction force applied tangentially to the edge of the tire will create a torque of that magnitude? N
A wheel that is initially at rest is mounted on an axle that is not frictionless. When a constant external torque of 50.0 N-m is applied to the wheel for 25.0 s the wheel angularly accelerates to an angular speed of 750 rpm. The external torque is removed and the wheel comes to rest after 120 s due to the friction at the axle. Write down N2L for each situation. What is (a) the moment of inertia of the wheel and (b) the magnitude of the frictional torque on the wheel at the axle (which is assumed to be constant)? (c) Include a complete diagram of each situation.
A student holds a bike wheel and starts it spinning with an initial angular speed of 9.0rotations per second. The wheel is subject to some friction, so it gradually slows down. In the 10 s period following the inital spin, the bike wheel undergoes 70 complete rotations. Assuming the frictional torque remains constant, how much more time Δts will it take the bike wheel to come to a complete stop? The bike wheel has a mass of 0.625 kg and a radius of 0.315 m. If all the mass of the wheel is assumed to be located on the rim, find the magnitude of the frictional torque τf that was acting on the spinning wheel.
In the figure, two 6.90 kg blocks are connected by a massless string over a pulley of radius 1.10 cm and rotational inertia 7.40 x 10-4 kg-m². The string does not slip on the pulley; it is not known whether there is friction between the table and the sliding block; the pulley's axis is frictionless. When this system is released from rest, the pulley turns through 0.900 rad in 148 ms and the acceleration of the blocks is constant. What are (a) the magnitude of the pulley's angular acceleration, (b) the magnitude of either block's acceleration, (c) string tension T1, and (d) string tension T2? Assume free-fall acceleration to be equal to 9.81 m/s?. (a) Number i Units (b) Number Units (c) Number Units (d) Number Units >
Three forces are applied to a solid cylinder of mass 12 kg (see the drawing). The magnitudes of the forces are F4 = 15 N, F2 = 24 N, and F3 = 17 N. The radial distances are R2 = 0.22 m and R3 = 0.10 m. The forces F2 and F3 are perpendicular to the radial lines labeled R2 and Rs. The moment of inertia of the cylinder is - VR, Find the magnitude of the angular acceleration of the cylinder about the axis of rotation.
Problem 2: A hollow sphere of mass M and radius R rolls without slipping up a rough incline that makes an angle with the horizontal. Find the magnitude of the linear acceleration a of the center of mass of the sphere. α= α= a=39-sin-sine 59 3 59 cos e α M a = 3g sin 0 R 5 D 79 a = g sin 0
A 17.0-m length of hose is wound around a reel, which is initially at rest. The moment of inertia of the reel is 0.490 kg-m², and its radius is 0.150 m. When turning, friction at the axle exerts a torque of magnitude 3.20 N-m on the reel. If the hose is pulled so that the tension in it remains a constant 26.0 N, how long does it take to completely unwind the hose from the reel? Neglect the mass and the thickness of the hose, and assume that the hose unwinds without slipping.
In the figure, a solid cylinder of radius 6.0 cm and mass 14 kg starts from rest and rolls without slipping a distance L = 7.9 m down a roof that is inclined at angle 0 = 35°. (a) What is the angular speed of the cylinder about its center as it leaves the roof? (b) The roof's edge is at height H = 3.8 m. How far horizontally from the roof's edge does the cylinder hit the level ground? (a) Number L (b) Number i 0 H 119.737 ! Units rad/ Units 3
An old millstone, used for grinding grain in a gristmill, is a solid cylindrical wheel that can rotate about its central axle with negligible friction. The radius of the wheel is 0.330 m. A constant tangential force of 300 N applied to its edge causes the wheel to have an angular acceleration of 0.880 rad/s2. (a) What is the moment of inertia of the wheel (in kg · m2)? kg · m2 (b) What is the mass (in kg) of the wheel? kg (c) The wheel starts from rest and the tangential force remains constant over a time period of 5.50 s. What is the angular speed (in rad/s) of the wheel at the end of this time period? rad/s
A uniform solid cylinder of mass M=2 kg and radius R=0.49 m is given an initial angular speed ω=15 rad/s when it is at the bottom of an inclined plane of height h=4.1 m, as shown in the figure. The cylinder rolls without slipping. Find ω if the cylinder comes to rest at the top of the inclined plane. (Take g=9.81 m/s2, Icylinder=1/2MR2 ).
A student holds a bike wheel and starts it spinning with an initial angular speed of 9.09.0 rotations per second. The wheel is subject to some friction, so it gradually slows down. In the 10.0 s10.0 s period following the inital spin, the bike wheel undergoes 65.065.0 complete rotations. Assuming the frictional torque remains constant, how much more time Δ?sΔ⁢ts will it take the bike wheel to come to a complete stop? Δ?s=Δ⁢ts= ss The bike wheel has a mass of 0.725 kg0.725 kg and a radius of 0.385 m0.385 m. If all the mass of the wheel is assumed to be located on the rim, find the magnitude of the frictional torque ?fτf that was acting on the spinning wheel.