A hole is being drilled on a block aluminum alloy with 10mm drill at a feed of 0.25 mm/rev . The spindle is running at N = 850 rpm . Calculate the metal removal rate.

Q: How much machining tin 58 mm over a length of approach length and ow

A: Machining Time

Q: The drilling time (in minute) is

A: Given, Diameter,d= 20 mmThickness,t= 40 mm N= 400 rpmFeed rate,f= 0.1 mm/revDetermine the drilling…

Q: A student is using a lathe with 80-hp and 80% efficiency to fabricate a copper alloy with Sy =…

A:

Q: a production turning operation, the workpart is 60 mm in diameter and 500 mm long. A feed of 0.75…

A:

Q: 8. A hole of 20 mm diameter is to be drilled in a steel block of 40 mm thickness. The drilling is…

A: Solution:-Given thickness of steel block=40 mmapproach and over run together=d2=10 mmrotational…

Q: Sample Problem 1 A man create a 5 inches thick hole with a 2" diameter on an aluminum flat bar.…

A:

Q: A hole is being drilled on a block aluminum alloy with 10mm drill at a feed of 0.25 mm/rev . The…

A: Given data:

Q: The time taken to drill a hole through a 30mm thick plate with the drill rotating at 200 rpm and…

A:

Q: Q3). A block of 190mm length and 100mm width is to be machined in shaping process. The permissible…

A:

Q: Through hole of 12 mm diameter is to be drilled in a steel plate of 20 mm thickness, drilled spindle…

A: Given: The diameter of hole is d=12 mm. The thickness of steel plate is t=20 mm. The drilled…

Q: A drilling operation is to be carried out with a 12.7mm diameter twist drill in a steel work…

A:

Q: Through hole of 12 mm diameter is to be drilled in a steel plate of 20 mm thickness, drilled spindle…

A: We know that linear velocity and rpm are related by : πDN = v ⇒N=vπD = 20π x 0.012 =530.5165 rpm

Q: A steel bar 200 mm in diameter is turned at a feed of 0.25 mm/rev with a depth of cut of 4 mm. The…

A: Given data: The diameter of the steel bar is D = 200 mm. The feed rate is f = 0.25 mm/rev. The…

Q: In a single pass drilling operation, a through hole of 15mm diameter is to be drilled in a steel…

A: Given: The diameter of hole, d = 15 mm The thickness of plate, h = 50 mm The spindle speed, N = 500…

Q: A 16mm Solid carbide tool with two teeth is used to machine Aluminium using the cutting speed of…

A:

Q: A cutting tool has a nose radius of 1.8mm find the feed rate for a theoretical surface roughness of…

A: Concept: Surface roughness is measured by center line average. (CLA)  CLA = (fxf) / (8 x R)  Where f…

Q: Drilling A through hole is drilled in un aluminum. Alloy Plate of 15 mm thickness with a drill bit…

A:

Q: A 12" through hole is to be drilled in a 1 inch thick steel plate. A standard twist drill having a…

A:

Q: length is 1100 mm. The feed is 0.35 mm/rev and the depth of cut is 2.5 mm. The cut will be made with…

A: Given data:-diameter of bar, D=400mmLength of bar, L=1100mmfeed, f=0.35mm/revdepth of cut,…

Q: ne time for producing a hole will be

A: Given, through holes (d)= 10mmthickness of steel plate(t)= 20mm               α=1202=600Break…

Q: Example 2 Calculate the r/min at which a drill press should be set to make threading for M12 x 1.75…

A: Given-  material - cast iron M12 x 1.75   Diameter of workpiece (D)= 12 mm Feed = Pitch of Thread =…

Q: A single-point HSS tool with a 3/64 in nose radius is used in a shaping operation on a ductile steel…

A:

Q: Blind hole 20 mm diameter, 60 mm deep are being drilled in steel stock, drilling spindle speed is…

A:

Q: A through hole is drilled in an aluminum alloy plate of 15 mm thickness with a drill bit of diameter…

A:

Q: An aluminum hollow shaft 200 mm outside diameter, 100 mm inside diameter and 500 mm length from…

A: Given data as per question The outside diameter of shaft =200 mm Inside diameter =100 mm Length of…

Q: ample: calculate the

A: given:

Q: As the cutting speed for mild steel is 100ft/min and RPM is 1000, find the diameter of the cutting…

A: Given data as per question cutting speed = 100 ft/min Speed =1000 Feed rate =0.002 in v=100…

Q: A 0.4-inch diameter bit is used in a vertical or vertical drill that operates at 300 rpm. If the…

A:

Q: A mild steel specimen of Initial diameter of 53.5 mm is turned to final diameter of 47 mm for an…

A: for solution refer below images.

Q: lease give the correct solution A cylinder of 25 mm diameter and 100 mm length is turned with a…

A: Given:Diameter, d=25,length, l=100 mVT0.25=55Vc=22 m/minf=0.046 mm/rev

Q: A mild steel specimen of  Initial diameter of  30.5 mm is turned to final diameter of 27 mm for an…

A: Turing is a material removal operation in which the diameter of the workpiece is reduced. It…

Q: 3. It is required to machine a slot with length 100 mm, width 15 mm, and depth 4 mm. Calculate the…

A: Given: The length of machine slot, L = 100 mm The width of machine slot, b = 15 mm The depth of…

Q: Drilling, diameter = 0.375 inches, feed is 0.003 inches/tooth, number of teeth is 2, rotation speed…

A: Given-To Find-Material Removal Rate (MRR)Power at the MotorPower at the ToolTorque at the Tool

Q: What is the recommended feed for the turning operation above?

A:

Q: A mild steel block is being drilled with a drill of 10 mm diameters. Given Helix angle = 30° Feed =…

A:

Q: Aluminum bar with 100mm diameter and 500mm long is turned down to 88mm diameter, using two passes on…

A: