A fire hose has an inside diameter of 6.40 cm. Suppose such a hose carries a flow of 40.0 L/s starting at a gauge pressure of 1.62 X 106 N/m2. The hose goes 10.0 m up a ladder to a nozzle having an inside diameter of 3.00 cm. Calculate the Reynolds numbers for flow in the fire hose and nozzle to show that the flow in each must be turbulent.

A fire hose has an inside diameter of 6.40 cm. Suppose such a hose carries a flow of 40.0 L/s starting at a gauge pressure of 1.62 X 106 N/m2. The hose goes 10.0 m up a ladder to a nozzle having an inside diameter of 3.00 cm. Calculate the Reynolds numbers for flow in the fire hose and nozzle to show that the flow in each must be turbulent.

Similar questions

Problem 3: Water flows through a horizontal cylindrical pipe from a smaller-diameter region to a larger-diameter region. At point A, where the pipe's diameter is 3.5 cm, the water's speed at 25.0 m/s. At point B, the pipe's diameter is 7.0 cm. (a) What is the water's speed at point B? (b) What is the pressure difference between points A and B? Which point has the greater pressure?
Calculate the Reynolds numbers for the flow of water through a nozzle with a radius of 0.270 cm and a garden hose with a radius of 0.940 cm, when the nozzle is attached to the hose. The flow rate through hose and nozzle is 0.485 L/s. (Assume the temperature of the water is 20°C.) (a) a nozzle with a radius of 0.270 cm Can the flow possibly be laminar? Yes No (b) a garden hose with a radius of 0.940 cm Can the flow possibly be laminar? Yes No
Suppose you have a 8.8 cm diameter fire hose with a 3.6 cm diameter nozzle. a) Calculate the pressure drop due to the Bernoulli effect as water enters the nozzle from the hose at the rate of 40.0 L/s. Take 1.00 × 103 kg/m3 for the density of the water. b) To what maximum height, in meters, above the nozzle can this water rise? (The actual height will be significantly smaller due to air resistance.
While taking a shower, you notice that the shower head is made up of 36 small round openings, each with a radius of 2.00 mm. You also determine that it takes 2.00 s for the shower to completely fi a 1.00-liter container you hold in the water stream. The water for the shower is pumped by a pump that is 5.60 m below the level of the shower head. The pump maintains an absolute pressure of 1.50 atm. Use g = 10 m/s?, and assume that 1 atmosphere is 1.0 x 105 Pa. (a) At what speed does the water emerge from the shower head? 1.105 m/s (b) What is the speed of the water in the pipe connected to the pump? m/s (c) What is the cross-sectional area of the pipe connected to the pump? m2
Fire hoses used in major structure fires have inside diameters of 6.4 cm. Suppose such a hose carries a flow of 40 L/s starting at a gauge pressure of 1.62 × 10°N/m². The hose goes 10 m up a ladder to a nozzle having an inside diameter of 3 cm. Assume negligible resistance, density of water is 1000 kg/m³, and atmospheric pressure = 1.013×105 Pa. Using the flow rate (a) Calculate the velocity at the start of the hose. V = start m/s (b) Calculate the velocity at the nozzle. V = nozzle m/s Pnozzle (c) Calculate the gauge pressure at the nozzle, P, If nozzle <3%, then enter P nozzle =0, else P atm |P nozzlel enter the calculated value. If atm <3%, then we are going to assume that the absolute pressure at the nozzle is approximately equal to the atmospheric pressure, making the gauge pressure almost zero when compared to the atmospheric pressure. Pnozzle Pa
A level (horizontal) pipe contains a non-viscous, incompressible fluid with a density 1200 kg/m³ that is flowing steadily. At one position within the pipe, the pressure is 300 x 103 N/m2 and the speed of the flow is 20.0 m/s. At another position, the pressure is 200 x 103 N/m². What is the speed of the flow at this second position?
A pumping station uses a Venturi tube to measure the flow rate of gasoline. The density of the gasoline is p = 7.40 x 102 kg/m3, the inlet and outlet tubes, respectively, have a radius of 2.80 cm and 1.40 cm, and the difference in input and output pressure is P, - P, = 1.20 kPa. (a) Find the speed (in m/s) of the gasoline as it leaves the hose. m/s (b) Find the fluid flow rate in cubic meters per second. m3/s