Answered: A cylindrical work part 200 mm in…

A cylindrical work part 200 mm in diameter and 700mm long is to be turned in an engine lathe. cutting conditions are as follows: - cutting speed 2.3 m/s. feed

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Related questions

Q: How much machining tin 58 mm over a length of approach length and ow

A: Machining Time

Q: A drilling operation is performed to create a through hole on a steel plate that is 20 mm thick.…

Q: A piece of Low carbon steel has (85mm) length machined by a lathe with cutting tool made of HSS,…

A: Given, Length of the specimen , L=85 mm. Depth of cut , d = 2 mm Feed , f = 0.2mm/rev. Cutting…

Q: A student is using a lathe with 80-hp and 80% efficiency to fabricate a copper alloy with Sy =…

Q: 3. A 50-mm-long, 30-mm-diameter hole in a steel rod is being enlarged in diameter to 31 mm by one…

Q: In an orthogonal cutting operation an 8 mm deep groove is to be turned on a 50 mm diameter steel…

Q: (b):- Calculate the total time to mill a block of aluminum with dimensions of 100 x 40 x 50 to…

Q: A turning operation is performed using a rake angle of 15degree. Cutting conditions are, feed= 0.30…

Q: A 4"x 8" cast steel plate is to be machined using a milling cutter with 8 inserts. The operation is…

A: Given dataD=8inchV=350sfpm=350×39.37=inch/minf=0.015inch/totthl3=0.18inchz=8 ***as per our company…

Q: Note: All dimensions are in mm Ø 34 7. 3.) A 34 mm diameter x 120 mm shafting will be turned using a…

A: Given:- Dinitial=34 mm,Dfinal,Rough=31 mm,Dfinal,Finish=30 mm,L=50 mm,rough turn:-V=30 mmin,depth of…

Q: Q3). A block of 190mm length and 100mm width is to be machined in shaping process. The permissible…

Q: Determine the total machining time for a workpiece 30mm in diameter and the required length is 145…

A: Given: Initial length of the material→X=149 mm Initial Diameter of the material→D=38 mm Depth of cut…

Q: The orthogonal cutting of steel is done with 10° rake tool with a depth of cut of 4mm feed rate of…

A: Merchant circle:

Q: Given that the length of a work-piece made from copper alloy to be face-milled is 250 mm and the…

A: Given : L = 250 mm D = 150 mm z = 10 To find : Cutting speed and feed

Q: An external turning operation is performed on a hollow workpiece of 200 mm external diameter and 100…

A: Hello. Since your question has multiple sub-parts, we will solve first three sub-parts for you. If…

Q: 5. An engine lathe is used to turn a cylindrical work part, cutting speed 2.4 m/s, feed 0.20 mm/rev,…

Q: ф20 O 25 $10 25 10 45

A: Machining time is given by, T=LfNwhere, L=length of operationf= feed in mm/revN=rpmGiven:V=60…

Q: The outside diameter of a cylinder made of steel is to be turned. The starting diameter is 120 mm…

A: we know that, Taylor’s tool life equation is given by, VTn = C where, V= Cutting speed (m/min) T=…

Q: A 12" through hole is to be drilled in a 1 inch thick steel plate. A standard twist drill having a…

Q: It is required to reduce the thickness of cast iron workpiece with dimensions (L x w x t) of (230 mm…

Q: Find the machining time required to turn a mild steel rod from 65mm to 58 mm over a length of 100 mm…

A: Given data: - The initial diameter of the rod is D = 65 mm. The final diameter of the rod is d = 58…

Q: 4) The workpiece material is copper alloy. Assume that D=220 mm, w = 40 mm, 1= 550 mm, d=2 mm, v=1…

A: Given Data The diameter is:D=220 mm The width of cut is:w=40 mm The length of the cut is:l=550 mm…

Q: If a fairing operation is executed at a rotational speed of 40.0 rev / min, the feed is 0.015 in /…

A: As the outer and inner diameter is not given so I am assuming it as D0 and Direspectivelya)…

Q: to perform a rough cut single point facing operation in a lathe of 5 mm diameter cylinder workpiece…

A: Given Diameter = 5mm Feed rate = 0.5 mm/rev Depth of cut = 4.5mm Specific energy = 3Ws/mm3 To find…

Q: Calculate the time required to machine a workpiece 170 mm long, 60 mm diameter to 165 mm long 50 mm…

A: Given:L1=170 mmL2=165 mmD1=60 mmD2=50 mmN=440 rpmf=0.3 mm/revd=2 mmApproach and overtravel=5 mm

Q: Calculate the machining time to complete the job as shown below from a bar 120 mm long and 60 mm…

A: Given: length of the job→L=120 mm initial diameter→D=60 mm maximum depth of cut→d=5 mm hence in…

Q: In orthogonal turning of a low carbon steel bar of diameter 150 mm with uncoated carbide tool. the…

Q: In a turning operation, the workpiece diameter is Dm-40.00 mm and the diameter after the operation…

A: GIVEN DATA - D=40mm D2=24mm V=132m/min f=0.03mm/rev WE HAVE TO CALCULATE MRR

Q: A cylindrical workpiece has a 14.0 in diameter and has 30 in long. It is to be turned in an engine…

Q: average power consumption

A: Given; cast iron block of ,length=200 mmdepth of cut=4 mmfeed=0.25 mm/ strokecutting edge angle,…

Q: ample: calculate the

A: given:

Q: e. What are the programmed feed material removal rate.

A: Given data; d=155 mmf=0.15 mm/revcutting speed(v)=150 m/min=150×103 mm/minfind the programmed feed…

Q: A 12" x 4" block of soft aluminum alloy (u, = 2.5 hp.min/in³) is face milled at a depth of cut of…

A: Given Data: Depth of cut DC=18inch Length of block l=12 in Breadth of block b=4 in ut of aluminium…

Q: As the cutting speed for mild steel is 100ft/min and RPM is 1000, find the diameter of the cutting…

A: Given data as per question cutting speed = 100 ft/min Speed =1000 Feed rate =0.002 in v=100…

Q: Example: A cylinder of 155 mm diameter is to be reduced to 150mm diameter in one turning cut with a…

Concept explainers

Joining Processes

It is the process of permanent or temporary joining of two metal pieces with the help of heat or pressure. Two metal parts are assembled by applying an energy source for the formation of a single unit. The obtained joined metals cannot be fragmented easily with the application of any force.

Question

A cylindrical work part 200
mm in diameter and 700mm
long is to be turned in an
engine lathe. cutting
conditions are as follows: -
cutting speed 2.3 m/s. feed
is 0.32 mm/rev. depth of cut
is 1.8 mm. calculate cutting
time.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

Identify and explain the method of milling process in which the stresses on the teeth is maximum at the end of the cut with neat diagram.
H.W. The face milling cutter of D= 200 mm used to cut a block which is 200 mm = H, 1=480 mm, if f= 0.7 mm/rev is used and the overrun of the cutter is 12 mm and cutting speed 320 mm/min. Calculate the machining time.
3. A slot of 20 mm width is to be produced using horizontal milling machine. The ks 5,000 N/mm?, cutting speed is 50 m/min, feed rate is 200 mm/min, depth of cut is 4 mm, cutter diameter is 140 mm, and the number of teeth is 12. Calculate the machining power.
Find the machining time required to turn a mild steel rod from 65mm to 58 mm over a length of 100 mm by using a carbide insert. If the approach length and over run length is taken as 5 mm, Cutting speed as 20 m/min and feed is =0.2 mm/rev, and the depth of cut is 0.5mm
In 3-axis milling, the table feedrate is 703.00 mm/min. Using a 10mm endmill to cut the material with a radial depth of 4.60 mm and axial depth of 4.20 mm, what is the material removal rate (Cm³ /min) in this operation? Your Answer: Answer
A surface of 43 mm x 246 mm will be machined by using a shaper and 7 mm deep stock will be removed from the surface. The shaper is operating at 24 strokes/minute and feed is 0.7 mm/stroke. If the maximum stroke length is 827 mm and allowable depth of cut is 0.4 mm for both of rough and finish cuts, what is the total machining time, in minutes ?
A cylindrical workpart 200 mm in diameter and 700 mm long is to be turned in an engine lathe. Cutting speed = 2.30 m/s, feed= 0.32 mm/rev, and depth of cut = 1.80 mm. Draw the process in detail (the required keywords) and determine (a) cutting time, and (b) metal removal rate.
A student is using a lathe with 80-hp and 80% efficiency to fabricate a copper alloy with Sy= 1200 ksi. If the width of cut is 0.30 in. and the student set a rake angle of 0° and a cutting speed of 200 ft/ min while she assumed a coefficient of friction to be 0.5. What is the maximum depth of cut the student can achieve?
A part to be turned in an engine lathe must have a surface finish of 1.6 μm. The part is made of a free machining aluminum alloy. Cutting speed = 150 m/min. The nose radius on the tool = 0.75 mm. Determine the feed that will achieve the specified surface finish.
3.) A 3 inches diameter 5-tooth cemented-carbide-tipped face milling cutter is to use for milling a rectangular shape machine steel workpiece (2-in width x 5 in. length) in a single pass. The cutting speed is 150 ft/min and the feed per tooth is 0.016 in. Determine (a) the feed rate in inch per minute and (b) the cutting time omitting the over travel.
1.10A O50 mild steel bar is being turned at 1.70 revis on a multi-tool center lathe having nine tools. For all tools the depth of cut is 4mm. the feed is 0.255mm/rev, and the specific cutting pressure is 1 545N mm?. Calculate the total power consumed for the operation
A Ø1.0” piece of titanium needs to be turned on a lathe using a carbide cutting tool. The surface speed is 170 ft/min and the chip load is .015 in/rev. What is the recommended feed for the turning operation above?