A cylinder of 125mm radius rotates concentrically inside a fixed cylinder of 130mm radius. Both cylinders are 0.73mm long. Determine the viscosity (in Pa-s) of the liquid which fills the space be- the cylinders if a torque of 0.72 N-m is required to maintain an angular velocity of 2 radians/sec. Assume the velocity gradient to be a straight line.

A cylinder of 125mm radius rotates concentrically inside a fixed cylinder of 130mm radius. Both cylinders are 0.73mm long. Determine the viscosity (in Pa-s) of the liquid which fills the space be- the cylinders if a torque of 0.72 N-m is required to maintain an angular velocity of 2 radians/sec. Assume the velocity gradient to be a straight line.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Kerosene is placed inside a glass capillary tube having a radius of 0.5 mm. The kerosene inside the tube is measured to have a standing height of 59mm. Determine the true static height of the kerosene using a surface tension value of 0.035 N/m and Sg=0.8.
In a rotating cylinder test, the inner cylinder is of diameter 0.2 m and the outer cylinder of diameter 0.205 m contains the liquid up to a height of 0.3 m. The clearance at the bottom of the two cylinders is 5 mm. When the outer cylinder is rotated at a speed of 400 r.p.m, the torsion meter attached to the inner cylinder show the value of torque equal to 5886 Nm. Determine the viscosity of liquid.
1) When a 2-mm-diameter tube is inserted into a liquid in an open tank, the liquid is observed to rise 10 mm above the free surface of the liquid. The contact angle between the liquid and the tube is zero, and the specific weight of the liquid is 1.2 x 10+ N/ m². Determine the value of the surface tension for this liquid.
fluid mechanics
I need the answer as soon as possible
Weter flows up a tapered pipe (figure). A differential mercury manometer is attached to the pipe at Wand B. The pipe has a diameter of 200 mm at A and 100 mm at B, the point B being 1 m above the alot A. Obtain the deflection in the manometer corresponding to a discharge of 50 L/s. Neglect the friction in the pipe. Relative density of mercury 13.6. %D 100 mm 1 m 200 mm
Answer the question quecly please Fluid
There two parallel discs, one is up and another is down, whose diameters are both d. The thickness of the gap between the two discs is ô. The dynamic viscosity coefficient of the liquid in the gap is µ. The below disc is fixed. The above disc rotated around the axis at the angular velocity o. How much is the torque to make the disc rotate?
A cylinder of 0.40-ft radius rotates concentrically inside a fixed cylinder of 0.42-ft radius. Both cylinders are 1-ft long. Determine the viscosity in terms of Reyn of the liquid that fills the space betweent the cylinders if a torque of 0.650 lb-ft is required to maintain an angular velocity of 60 rpm.
The pipe bend shown is in a horizontal plane. Oil with a specific gravity of 0.86 enters the reducing bend at section A with a velocity of 3.2 m/s and a pressure of 150 kPa. Neglecting head loss, determine a) The x-component of the reaction by the bend, FRx (N) and b) The y-component of the reaction by the bend FRY (N). ds = 100 mm da = 150 mm 30°
PLS SHOW COMPLETE FBD AND SOLUTION
It is simple question so plz solve this