A concrete cylinder (6 x 12 in.), cured according to ASTM C 511 (100% RH and 23 °C) and tested at an age of 28 days in compression according to ASTM C 39 with a load rate of 30 psi/sec, fails at a load of 98,342 lb.  The unit weight of the concrete is 145 lb/ft3. What is the compressiv

Q: Concrete is required for walls of a building that will be Mild Exposed to freezing and thawing. The…

A: Given data:- Cross-section of a wall is 300×1500 mm Spacing between the reinforcing steel is 50 mm…

Q: Concrete is required for walls of a building that will be Severe Exposed to freezing and thawing.…

A: Reference : ACI 311 Mix design All tables are referred from ACI 311 Mix design. Table : Relationship…

Q: 10 %) of concrete samples have compressive strength less than (30 mn/m2) and (20%) have strength…

A: Given:- 10 % concrete samples compressive strength<30 MN/m2 20 % concrete samples compressive…

Q: ve desic Q4) Concrete is required for walls of a building that will be moderately exposed to…

A:

Q: Three 100*200 mm cylindrical concrete specimens were tested for 28 days compressive strength and…

A: Given data: Compressive strength of the test specimens after 28 days fc1=30.5 MPafc2=29.6…

Q: On the 28th day after concrete was mixed, a 6.00-in-diameter concrete cylinder failed in a…

A: Given data, Diameter of cylinder d = 6 in Compressive load P = 145000 lb Factor of safety γ0 = 5

Q: Me lesio Q4) Concrete is required for walls of a building that will be moderately exposed to…

A: Mix Design as per ACI 211.91 Compressive strength = 21.5 MPa Slump = 50 mm Cement - type I Aggregate…

Q: 6.31 A concrete mix includes the following ingredients per cubic foot: 5463 a. Cement = 25 lb b.…

A:

Q: Three concrete cylinders are cast in the field and cured on site. After 3 days they are brought and…

A: Given, Failure load for sample 1 = 212000 N  Failure load for sample 2 = 225000 N

Q: Please solve the following problem with step by step soutions

A: Step 1: Step 2: Step 3: Step 4:

Q: Assume that you are going to make a three cubic yard (3yd³) of concrete. Create your own mix design…

A: The design strength = 3.8 ksiThe slump should = 3 to 4 in.The maximum size of aggregate = 2 inUnit…

Temperature related material properties

Temperature-related properties of materials are the properties that change or show any variation with temperature variations. Various properties of materials include physical properties, mechanical properties, chemical properties, electrical properties, magnetic properties, etc. The chemical, electrical, and magnetic properties of materials are important, but the physical and mechanical properties are more important. Based on their composition and chemical bonding, materials are classified as metals, ceramics, polymers, and composites.