A circular shape blank will be cut of 100 mm diameter from a strip of 2.8 mm with a clearance value of 0.25 mm. Take the shear strength as 400 MPa. Determine a) The appropriate punch diameter. b) Blanking force. c) Blanking force when the blade angle is (5)°.

Q: A mild steel specimen of Initial diameter of 53.5 mm is turned to final diameter of 47 mm for an…

A:

Q: a production turning operation, the workpart is 60 mm in diameter and 500 mm long. A feed of 0.75…

A:

Q: c) A punch must cut a hole 30 mm diameter in a sheet of steel 4 mm thick. The ultimate shear stress…

A: Calculated force required.

Q: A cast iron component for motorcycle is to be tumed with machine settings of feed = 0.22 mm/rev, and…

A: Surface roughness is calculated.  If you liked my solution, I would really appreciate a LIKE, please…

Q: A cutting tool (0.250 in wide, rake angle 5°) is used to machine in orthogonal mode at 0.010 inch…

A:

Q: If a fairing operation is executed at a rotational speed of 40.0 rev / min, the feed is 0.015 in /…

A: As the outer and inner diameter is not given so I am assuming it as D0 and Direspectivelya)…

Q: . Draw the forces and angles involved in the cutting process and calculate shear angle (Ø), friction…

A:

Q: Draw the forces and angles involved in the cutting process and calculate shear angle (Ø), friction…

A:

Q: In an orthogonal cutting operation, the tool has a rake angle = 45°. The chip thickness before the…

A: Given DAta  Chip thickness before the cut, t=0.75 mm rake angle, 45 degree Deformed chip thickness,…

Machining Processes and Machine Tools

Machining is represented as the process in which an excessive amount of substance is eliminated from the particular element in the form of pieces. In machining, cutting tools such as rotary tools, lathe, drill press, grinder, chop saw, welders, and many more are applied to get the desired shape. As compared to other manufacturing processes, machining is precise and versatile.