A circular aluminum alloy [E = 70 GPa; a = 22.5 x 10-6/°C; v = 0.33] pipe has an outside diameter of 220 mm, a wall thickness of 15 mm, and a length of 4.0 m. The pipe supports a compressive load of 650 kN. After the temperature of the pipe drops 41°C, determine: (a) the axial deformation of the pipe. (b) the change in diameter of the pipe. Answer: (a) 8 = i mm AD = i mm

A circular aluminum alloy [E = 70 GPa; a = 22.5 x 10-6/°C; v = 0.33] pipe has an outside diameter of 220 mm, a wall thickness of 15 mm, and a length of 4.0 m. The pipe supports a compressive load of 650 kN. After the temperature of the pipe drops 41°C, determine: (a) the axial deformation of the pipe. (b) the change in diameter of the pipe. Answer: (a) 8 = i mm AD = i mm

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Related questions

Q: Calculate the normal stress in the brass rod in MPa. Calculate the normal stress in the bronze rod…

Q: A circular aluminum alloy [E = 70 GPa; a = 22.5 x 10-6/°C; v = 0.33] pipe has an outside diameter of…

Q: A polymer cylinder (2) is clamped between rigid heads by two steel bolts (1). The steel [E = 29,000…

A: To determine: normal stress in the polymer cylinder normal strain in the polymer cylinder normal…

Q: A circular aluminum alloy [E = 70 GPa; a = 22.5 x 10-6/°C; v = 0.33] pipe has an outside diameter of…

A: Given:Outside diameter of pipe, D=240 mmWall thickness=10 mmInside diameter of pipe, d=240-2×10…

Q: A pressure-vessel is fabricated by gluing the circular plate to the end of the vessel as shown in…

A: Internal pressure = P = .45MPa Diameter = d = 450mm Thickness = t = 10mm Side thickness = t' = 20mm

Q: Q.2. A \\ Iron-carbon alloys tested by compression test,where L - 30 mm, and Lf - 33.7 min.,…

A: Part A Strain = 33.7-30/30= 0.123 Part b 1 Elastic modulus* Strain 2. Compression test

Q: 3. A steel bolt through a 31-in long aluminum tube has the nut turned on until it just touches the…

Q: (a) the normal stress in the polymer cylinder. (b) the normal strain in the polymer cylinder. (c)…

A: ###Determination of Normal Stress and Strain ###

Q: = 30 mm. When Before loading on the cylindrical brass rod, its length is Lo = 0.3 m and its radius…

A: NOTE - Since we only answer up to 3 sub-parts, we’ll answer the first 3. Please resubmit the…

Q: A polymer cylinder (2) is clamped between rigid heads by two steel bolts (1). The steel (E = 29,000…

Q: A circular aluminum alloy [E = 70 GPa; a = 22.5 x 10-6/°C; v = 0.33] pipe has an outside diameter of…

A: Given: Modulus of elasticity =E Coefficient of thermal expansion Outside diameter Thickness Length…

Q: 1) The plastic polymer cylindrical pipe is carrying flowing water at 0.5 N/mm pressure. The pipe has…

Q: H.W.6: A hollow circular cold-rolled bronze [G, = 6,500 ksi] tube (1) with an outside diameter of…

A: Given G1=6500ksi di = 1.25 in do=1.75 in G2=12500 ksi Allowabe stress for tube 1 = 27ksi Allowable…

Q: 4. A titanium alloy (Ti-6Al-4V) pipe has a bronze C86100 copper alloy core and is subjected to a…

A: Required Average stress in each of the two materials and Elongation of the material.

Q: A circular aluminum alloy [E = 70 GPa; a = 22.5 × 10-6/°C; v = 0.33] pipe has an outside diameter of…

A: Given data E = 70 GPA α = 22.5 × 10-6 /°C μ = 0.33 Drop temperature (∆T) = -43° C Length of…

Q: A solid circular steel column is 3 m long and 0.4 m in diameter. It carries a load of 50 MN. The…

A: Given that , length = 3 m diameter = 0.4 m load P = 50 MN = 50 × 106 N E = 200 Gpa = 20 × 109 pa =…

Q: The point loads are placed at the fixed positions shown in the figure and they are live loads. A K a…

A: Since the condition for each subpart is varying, the first part will be calculated. Please submit…

Q: Internal diameter of a steel shaft is 70% of external dia and the shaft has to transmit 3500 kW at…

A: Given Data External diameter of shaft (D) Internal diameter of shaft (d) = 0.7 × D Power…

Q: 3. A steel bolt through a 30-in long aluminum tube has the nut turned on until it just touches the…

Q: A polymer cylinder (2) is clamped between rigid heads by two steel bolts (1). The steel [E = 29,000…

A: For the given polymer cylinder

Q: moment of inertia of the cross-section about the neutral axis (in mm4) c) What is the maximum…

A: a.) Calculate the cross-sectional area of the structural tube A=bd-b-2td-2t Substitute the value in…

Q: A circular aluminum alloy [E = 70 GPa; a = 22.5 x 10-6/°C; v = 0.33] pipe has an outside diameter of…

Q: A solid aluminum (E = 70 GPa] rod (1) is connected to a solid bronze (E = 93 GPa] rod (2) at flange…

Q: Full solution.

A: The diameter of steel bar, Ds =28mmThe length of steel bar, Ls=0.4m=400mmThe inside diameter of…

Q: A circular aluminum alloy [E = 70 GPa; a = 22.5 x 10-6/°C; v = 0.33] pipe has an outside diameter of…

Q: The aluminum shell is fully bonded to the brass core, and the assembly is unstressed at a…

A: Given Data:Temperature of 78°FChange in Temperature = 210°FBrass…

Q: Determine the tensile stress @section a-a considering the red trapezoidal plate

Q: Hanger Rod Bolt Top Yoke- Bottom Strap FIGURE 2

Q: A steel tube is rigidly attached between an aluminum rod and a bronze rod as shown. The maximum P…

Q: 6 - A circular shaft is composed of a steel core and a brass covering, as shown in the figure. Under…

A: Given Steel Core r=15 mmG=78GPa Brass cylinderro=20 mm outer diameterG=39 GPa To find The…

Concept explainers

Material Properties

Construction in civil engineering demands high strength, durability, and longevity. These targets can be achieved by better design and analysis, along with the correct choice of materials. Different materials have different properties and hence, they respond and performs differently under the various condition of external loadings. It is therefore a critical task of an engineer to select the right material based on the property that the material is supposed to function in real-time. When speaking about the property, there are different categories of material properties like chemical property, physical property, mechanical property, electrical property, magnetic property, thermal property, etc. These material properties form the basis of material selection in various applications.

Question

100%

A circular aluminum alloy [E = 70 GPa; a = 22.5 x 10-6/°C; v = 0.33] pipe has an outside diameter of 220 mm, a wall thickness of 15 mm,
and a length of 4.0 m. The pipe supports a compressive load of 650 kN. After the temperature of the pipe drops 41°C, determine:
(a) the axial deformation of the pipe.
(b) the change in diameter of the pipe.
Answer:
(a) ō = i
mm
AD = i
mm

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

2.31 The three symmetrically placed rods support the rigid block of mass M. Before the block was attached, the rods' ends were leveled. If the rods' properties are as listed, find the maximum allowable value of M. (sw is the working stress). ow. 1.2m 1.2m 260mm 180mm Copper
PROBLEM 2 A tri metallic bar is uniformly compressed by an axial force P-12KN applied through a rigid end plate The bar consists of a circular steel core surrounded by brass and copper tubes. The steel core has a diameter l0mm, the brass tube has an oute diameter of 15mm and the copper tube has an outer diameter of 20mm E for steel =210Gpa, E for brass = 100GPA and E for copper is 120GPA Calculate the compressive stress of each metal due to force P
A circular aluminum alloy [E = 70 GPa; a = 22.5 x 10-6/°C; v=0.33] pipe has an outside diameter of 200 mm, a wall thickness of 5 mm, and a length of 5.4 m. The pipe supports a compressive load of 670 kN. After the temperature of the pipe drops 43°C, determine: (a) the axial deformation of the pipe. (b) the change in diameter of the pipe. Answer: (a) 6= i AD= i mm mm
The steel pipe shown has an outside diameter of 175 mm, a wall thickness of 18 mm, an elastic modulus of E = 200 GPa, and a coefficient of thermal expansion of ? = 11.7 x 10-6/°C. Using a = 335 mm, b = 870 mm, and ?= 60°, calculate the normal strains at Hand K after a load of P= 45 kN has been applied and the temperature of the pipe has been increased by 35°C O 16 mm, an e load of P= 45 kN has been applied and the temperature of the pipe has been increased by Answers: EH = Ek= H K με με
A circular aluminum alloy [E = 70 GPa; a = 22.5 × 10-6/°C; v = 0.33] pipe has an outside diameter of 215 mm, a wall thickness of 12 mm, and a length of 4.3 m. The pipe supports a compressive load of 695 kN. After the temperature of the pipe drops 43°C, determine: (a) the axial deformation of the pipe. (b) the change in diameter of the pipe. Answer: (a) ō = i AD = i mm mm
A circular aluminum alloy [E = 70 GPa; a = 22.5 x 10-6/°C; v = 0.33] pipe has an outside diameter of 270 mm, a wall thickness of 15 mm, and a length of 5.5 m. The pipe supports a compressive load of 635 kN. After the temperature of the pipe drops 45°C, determine: (a) the axial deformation of the pipe. (b) the change in diameter of the pipe. Answer: (a) 8 = i AD= i mm mm
The steel pipe shown has an outside diameter of 175 mm, a wall thickness of 18 mm, an elastic modulus of E = 200 GPa, and a coefficient of thermal expansion of ? = 11.7 x 10-6/°C. Using a = 335 mm, b = 870 mm, and ?= 60°, calculate the normal strains at Hand K after a load of P= 45 kN has been applied and the temperature of the pipe has been increased by 35°C O 16 mm, an e load of P= 45 kN has been applied and the temperature of the pipe has been increased by Answers: EH = Ek= H K με με
A polymer cylinder (2) is clamped between rigid heads by two steel bolts (1). The steel [E = 29,000 ksi; a = 6.5x10-6/°F] bolts have a diameter of 0.30 in. The polymer [E = 370 ksi; a = 38.3x 10-6/°F] cylinder has an outside diameter of 6.6 in. and a wall thickness of 0.75 in. Assume a = 29 in. and b = 37 in. If the temperature of this assembly changes by AT = 135°F, determine: (a) the normal stress in the polymer cylinder. (b) the normal strain in the polymer cylinder. (c) the normal strain in the steel bolts. %3D %3D %3D %3D (1) C (2) a (1) b. Answer: (a) 02 = psi. (b) E2 = 3d (c) E1 =
A circular aluminum alloy [E = 70 GPa; a = 22.5 x 10-6/°C; v=0.33] pipe has an outside diameter of 225 mm, a wall thickness of 15 mm, and a length of 5.0m. The pipe supports a compressive load of 670 kN. After the temperature of the pipe drops 48°C, determine: (a) the axial deformation of the pipe. (b) the change in diameter of the pipe. Answer: (a) 8 = mm AD= i mm
please just solve the second part
A circular aluminum alloy [E = 70 GPa; α = 22.5 × 10–6/°C; ν = 0.33] pipe has an outside diameter of 225 mm, a wall thickness of 15 mm, and a length of 5.0 m. The pipe supports a compressive load of 670 kN. After the temperature of the pipe drops 48°C, determine: (a) the axial deformation of the pipe. (b) the change in diameter of the pipe.